Spring Butt Hinges, Square Corner

Spring Butt Hinges, Square Corner

Spring butt hinges are used anywhere you need a door to self-close. A typical use is between your garage and house. We have them in a wide variety of sizes and finishes. As with all of our hinges they are in stock in our own warehouse.

Spring Butt Hinges, Square Corner

Spring Butt Hinges, Square Corner
  • Hinges are not handed. They will work on both right hand and left hand doors.
  • Made from steel base material.
  • Easily adjusted spring tension. Click on link below for instructions.
  • Screw hole pattern conforms to ANSI specifications for template hinges.
  • Pivot point aligns with non-spring hinges of the same size.
  • Screws are included.
  • SKU numbers that start with 760 are MADE IN USA.

PLEASE NOTE: Any of the hinges listed below with an SKU number that starts with 760 is a U.L. listed Grade 1 hinge and may be used on a fire door. A minimum of two hinges per door is required for a fire door.

Maximum door weight using three spring hinges

  • 3-1/2" - 90 lbs.
  • 4" - 110 lbs.
  • 4-1/2" - 150 lbs.

Finishes:

  • 632 (US3) Bright Brass Plated
  • 633 (US4) Satin Brass Plated
  • 600 (USP) Primed for Painting
  • 640 (US10B) Oil Rubbed Bronze Plated
  • 646 (US15) Satin Nickel Plated
  • 652 (US26D) Satin Chrome Plated
  • 651 (US26) Bright Chrome Plated
Click here for Information & Pricing

Peachtree Spring Butt Hinge, 4 x 3-3/4

Peachtree Spring Butt Hinge, 4 x 3-3/4
  • Peachtree spring hinge is specially made to fit certain doors and frames made by Peachtree.
  • Residential grade spring hinge.
  • Made from steel base material.
  • Spring tension is easily adjusted.
  • May be used with residential non-spring hinges of the same size.
  • Hinge is UL listed (Class 1) for fire door applications.
  • Wood screws and machine screws are included.
  • Hinge is not handed. OK to install hinge with tension adjustment slot down. Care must be taken to adjust spring tension in same direction as if tension slot was in the upward position.
  • MADE IN USA.

Finishes:

  • 633 (US4) Satin Brass Plated
Click here for Information & Pricing

Castlegate Spring Butt Hinge, 4 x 4

Castlegate Spring Butt Hinge, 4 x 4
  • Castlegate spring butt hinge is specially made to fit certain doors and frames made by Castlegate. It is a residential grade hinge.
  • Made from steel base material.
  • Spring tension is easily adjusted.
  • May be used with residential non-spring hinges of the same size.
  • Hinge is UL listed (Class 1) for fire door applications.
  • Wood screws and machine screws are included.
  • MADE IN USA.

Finishes:

  • 633 (US4) Satin Brass Plated
Click here for Information & Pricing