Door Pulls

Door Pulls

Large pulls for doors which do not require a latch or lock.

9 Inch Double Heart Handle

9 Inch Double Heart Handle
  • Forged Iron base material
  • Measures 9" from tip to tip
  • Stands 1-1/2" in relief
  • Matching wood screws included
  • This handle is a match and works as a dummy handle for our 9" Double Heart Thumb Latch (SKU 778140).
  • This high quality product matches our other "Forged Iron" Strap hinges and Dummy Straps

Finishes:

  • Rough Black Iron Finish
Click here for Information & Pricing

13" Rustic Pull, Decorative Resin

13
  • Rustic styled decorative door pull
  • Made from resin but looks like forged iron
  • Advantages of resin,
    • no rust or corrosion
    • they are much lighter weight than iron
    • maintenance free
    • easy to install
  • Dimensions
    • Length is approximately 13"
    • Width is approximately 1-3/8"
    • Projection is approximately 1-1/2"
  • Matching wood screws are included

PLEASE NOTE: This item is not made to be a functional item. It is decorative only and should not be used to pull open a door.

Click here for Information & Pricing

Grapevine Pull for Gates and Doors

Grapevine Pull for Gates and Doors
  • Door and gate pull with grapevine styling. Features a vine like handle with a cluster of grapes at each end and a grape leaf at each end that acts as the mounting plates.
  • Available in two sizes; medium and large.
  • The large size measures 19" from tip to tip. The handle diameter is 1". Each grape leaf mounting plate is about 5" tall by 4" wide.
  • The medium size measures 15.5" from tip to tip. The handle diameter is 3/4". Each grape leaf mounting plate is about 4" tall by 3-1/4" wide.
  • Made from steel.
  • Wood screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

11 Inch Heart Handle

11 Inch Heart Handle
  • Large door pull with a heart at each end.
  • Measures 11 inches tall.
  • Stands 2-3/8" in relief.
  • Forged Iron base material.
  • Matching wood screws are included.
  • This high quality product matches our other "Forged Iron" Strap Hinges and Dummy Straps.
  • If you need a dummy handle to match our SKU 778013 or 778520 (11" Rim Gate Latch) this handle is an exact match.

Finishes:

  • Rough black iron finish
Click here for Information & Pricing

Bean Style Handle

Bean Style Handle
  • Bean style gate or door handle
  • Matches our "Bean" style thumb latch, strap hinges and dummy strap hinges.
  • Handle measures 9.5" tall by 3-3/4" wide at widest point.
  • Made from malleable iron.
  • Matching wood screws included.
  • This handle works as a dummy handle for our Bean Rim Style Gate Latch (SKU 778017)
Click here for Information & Pricing

12.5" Elegance Style Pull, Decorative Resin

12.5
  • Elegance style decorative door pull
  • Made from resin but looks like forged iron
  • Advantages of resin,
    • no rust or corrosion
    • they are much lighter weight than iron
    • maintenance free
    • easy to install
  • Dimensions
    • Length is approximately 12.5"
    • Mounting plate diameter is approximately 2"
    • Diameter of pull is approximately 1-1/8"
    • Projection is approximately 2"
  • Matching wood screws are included

PLEASE NOTE: This item is not made to be a functional item. It is decorative only and should not be used to pull open a door.

Click here for Information & Pricing

12" Hammered Door Pull

12
  • Door pull is approximately 12" tall by 1-3/8" wide at its widest point.
  • Made from steel that is 1/4" to 5/16" thick.
  • Has the look of hammered or pounded wrought iron.
  • Matching screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Twisted Bar Door Pull

Twisted Bar Door Pull
  • Decorative door pull with square mounting plates and twisted bar grip.
  • Pull measures 9" from top to bottom.
  • Square mounting plates measure 2" by 2".
  • Handle projection is 3-1/4".
  • Diameter of twisted bar is 11/16".
  • Matching wood screws are included.
  • Made from steel base material.

Finishes:

  • Rust Finish
  • Black
Click here for Information & Pricing

Black Twisted Bar Pull

Black Twisted Bar Pull
  • Decorative gate or door pull with diamond style mounting plates and twisted bar grip.
  • Pull measures 9-1/2" from top to bottom including mounting plates.
  • Mounting plates measure 1-1/2" wide by 2" tall.
  • Handle projection is 2-3/4".
  • Diameter of twisted bar is 3/4".
  • Made from steel base material. Wood screws are included.

Finishes:

  • Flat Black Powder Coated
Click here for Information & Pricing

Solid Bronze Handle

Solid Bronze Handle
  • Solid bronze non-working handle for gates and doors. From our "Solid Bronze Collection".
  • This handle matches our Solid Bronze Thumb Latch and is ideal for use on double doors or gates.
  • Wood screws are included.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

Finishes:

  • Solid Natural Bronze
Click here for Information & Pricing

Pull for Gates and Doors, Solid Bronze

Pull for Gates and Doors, Solid Bronze
  • Solid bronze pull for gates and doors for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Available in two lengths; 12.5" and 17.5".
  • The 12.5" size has a screw hole center to center dimension of 11.5".
  • The 17.5" size has a screw hole center to center dimension of 16.5".
  • Attachment screws are included (Stainless steel hex head 5/16" diameter machine screws). Please specify in the comment section when you check out whether you would like your attachment screws 2" in length or 2-1/2" in length.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
  • PLEASE NOTE: We can special order these pulls so that you can mount one on each side of your door with no mounting hardware or screws visible (known as "back-to-back mounting"). Please call if you wish to order "back-to-back" mounting. We will need to know your door thickness. There is an additional charge of $30.00 for two pulls set up for "back-to-back mounting".

Finishes:

  • Solid Natural Bronze
Click here for Information & Pricing

Curved Plate Lever Turn, Solid Bronze

Curved Plate Lever Turn, Solid Bronze
  • Solid Bronze lever turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Lever turn is reversible, fits left hand and right hand doors.
  • Lever turn back plate measures 9-3/4" tall and 2-3/4" wide. Lever projection is 3-1/4".
  • Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/8".
  • Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
  • Spindle is 5" long by 5/16" square. Can be used on a maximum 1-3/4" thick door. Spindle is made from steel with a yellow zinc plating.
  • Spindle, spring latch and mounting screws are included with the lever turn.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
  • This item is sold by the "Set". A set is two lever turns (one for front of door and one for the back),one latch and strike,one spindle and all fasteners needed for installation.

Finishes:

  • Natural Bronze
Click here for Information & Pricing

Barrel Bolt, Solid Bronze

Barrel Bolt, Solid Bronze
  • Solid bronze barrel bolt is lockable with a padlock (padlock not included).
  • Bolt measures 8" long by 5/8" diameter.
  • Handle measures 4".
  • Mounting brackets are 1-3/4" by 3/4".
  • Barrel bolt surface mounts to gate or door.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

Finishes:

  • Natural Bronze
Click here for Information & Pricing

10" Heavy Iron Pull

10
  • Heavy Iron handle for gates or doors.
  • Installs with 1-1/2" matching wood screws (included).
  • Made from solid steel and black coated to resist corrosion.
  • Mounting plates measure 1-7/8" by 2-1/2"
  • Grip is 1-1/8" in diameter at thickest point.

Finishes:

  • Black Coating
Click here for Information & Pricing

10.5" Stainless Steel Handle

10.5
  • Stainless steel gate handle measures 10.5" by 1.25" at widest point and 1/16" thick.
  • Great for use in marine environments or anywhere the look of stainless steel is desired.
  • Stainless steel is recommended for redwood, cedar, vinyl and ACQ (treated) lumber.
  • Made from solid stainless steel (Type 304)
  • Stainless steel lag screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Small Ring Pull for Doors

Small Ring Pull for Doors
  • Small drop ring pull for doors.
  • Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
  • Diameter of ring is approximately 3". It is made out of 1/2" diameter material.
  • Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
  • Made of steel base material.
  • Wood screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Large Ring Pull for Doors

Large Ring Pull for Doors
  • Large drop ring pull for gates or doors.
  • Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
  • Diameter of ring is 5-1/4". It is made out of 5/8" diameter material.
  • Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
  • Made of steel base material.
  • Wood screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Decorative Resin Ring Pull for Doors, 11.5" Plate

Decorative Resin Ring Pull for Doors, 11.5
  • Decorative (non-functional) Ring Pull for Doors
  • Made from resin material but looks like forged iron
  • Advantages of resin,
    • no rust or corrosion
    • much lighter weight than iron
    • maintenance free
    • easy to install
  • Dimensions:
    • Plate size is approximately 2-1/4" by 11-1/2"
    • Ring is 4" in diameter
    • Ring thickness is 9/16"
    • Projection is approximately 1-3/4"
  • Wood screws are included

PLEASE NOTE: this item is not made to be a functional item. It is decorative only and should not be used to pull open a door.

Click here for Information & Pricing

Decorative Resin Ring Pull for Doors, 5.5" Plate

Decorative Resin Ring Pull for Doors, 5.5
  • Decorative (non-functional) Ring Pull for Doors
  • Made from resin material but looks like forged iron
  • Advantages of resin,
    • no rust or corrosion
    • much lighter weight than iron
    • maintenance free
    • easy to install
  • Dimensions:
    • Plate size is approximately 1-7/8" by 5-1/2"
    • Ring is 4" in diameter
    • Ring thickness is 9/16"
    • Projection is approximately 1-1/2"
  • Wood screws are included

PLEASE NOTE: this item is not made to be a functional item. It is decorative only and should not be used to pull open a door.

Click here for Information & Pricing