Blum Aventos Door Lift

Blum Aventos Door Lift

  • Blum's Aventos Stay Lift System for smaller doors.
  • Uses Blum's Blumotion soft-close technology
  • Works on both face frame and frameless cabinets.

Blum Aventos Stay Lift System

Blum Aventos Stay Lift System
  • Aventos HK-S Stay Lift System by Blum. Door opening angle is 107 degrees.
  • For smaller cabinets with lift-up doors (cabinet heights of 7-3/8" to 15-3/4" and cabinet widths of 15" to 39").
  • Aventos HK-S allows the door to open easily, remain in any desired position and close silently.
  • Aventos uses Blum's Blumotion soft-close technology.
  • Easy to adjust and install.
    • Instructions are included with purchase.
    • We recommend that you download and print out the much more complete PDF Instructions at the link below.
    • The file is approximately 3.5 mb and may take a few minutes to download depending on your internet speed.
  • Works on both face frame and frameless cabinets. For face frame cabinets, it is necessary to install a wooden mounting block behind and flush with the face frame. This block is not included and must be fabricated by the installer ("blocking out" the face frame).
  • Can be installed on cabinets with either overlay doors or inset doors.
  • Fasteners and a gray plastic cover (not shown in photo)are included with the purchase. Door and cabinet shown in image are not included.
  • There are three models available
    • Choose your model depending on the size and weight of your door.
    • Calculate the "Power Factor" of your door using the following:
      • Weight of door in pounds (Door Weight). The weight of the door must include double the weight of any cabinet knob or pull that is going to be attached to the door. So if the door weighs 10 lbs and your cabinet pull weighs 1/4 lb your Door Weight equals 10 lbs plus double the cabinet pull weight (1/2 lb) for a total of 10.5 lbs.
      • Cabinet Height in inches (Door Height)
    • The calculation for the "Power Factor" is:
      • The Door Weight times the Cabinet Height equals the "Power Factor"
    • Sample Calculation:
      • Door Weight is 10 lbs
      • Cabinet Height is 15 inches
      • Door Pull or Knob Weight is 0.25 lbs
      • Calculation: [10+ (2 x 0.25)] x 15 = 157.5
    • For a Power Factor of from 19 to 39 use our SKU 268045 (Blum #20K2B00.NA)
    • For a Power Factor of from 40 to 85 use our SKU 268046 (Blum #20K2C00-NA)
    • For a Power Factor of from 86 to177 use our SKU 268047 (Blum #20K2E00-NA)
  • This product is sold by the "Pair". Order one pair per door you are installing.
  • Optional Item: A restriction clip is available (our SKU 268049). A restriction clip restricts the normal 107 degree opening angle to 75 degrees. This is usefull for high doors where it might be difficult to reach the door handle. Also useful if the door hits something above it when in the full 107 degree open position. This item is offered for purchase when you check out.
  • IMPORTANT PLEASE NOTE: this product requires mounting plates to attach the door to the Aventos device. They are not included and must be ordered separately. The mounting plates are sold by the pair. Order 1 pair of our SKU 268044 for each Aventos device ordered. Mounting plates are offered for purchase during checkout.These mounting plates are for attaching to a wood door or an aluminum frame door with a wide frame. Each pair of mounting plates uses 4 each #7 flat head wood screws (not included but offered for purchase during checkout).
  • NOTE REGARDING SKU 268045: This model Aventos is for the smallest sized doors. Because of this, only one of the arms is powered. The second arm is free-swinging. This is normal and not a defect.
  • If attaching to a narrow aluminum frame door, different mounting plates are required, please call our office if these are needed.
Click here for Information & Pricing

Blum Aventos Mounting Plates

Blum Aventos Mounting Plates
  • Mounting plates for Blum Aventos Stay Lift System
  • Mounting plates are sold by the pair.
  • A pair is what is needed for one door.
  • Uses #7 Flat Head screws (4 screws per pair of mounting plates).
    • Screws are not included but are offered for purchase during checkout.
    • Order our SKU 268000
Click here for Information & Pricing

Restriction Clip for Blum Aventos HK-S

Restriction Clip for Blum Aventos HK-S
  • Restriction Clip for Blum Aventos HK-S (Blum's lift system for cabinet doors)
  • Clip restricts opening angle of the door to 75 degrees
  • Restricting the door opening angle can keep the door from hitting an object above or it can keep the handle within easy reach for high cabinets.
  • Only one clip is required per mechanism. Order two clips per door.
  • This item fits the following products available from
    • SKU 268045
    • SKU 268046
    • SKU 268047
  • Click on the link below for installation information.
  • Since this item is not shipped with installation instructions, please print out the installation information if you plan on ordering this product so you will have it when the product arrives.
Click here for Information & Pricing