Overlay Hinges, Non-wrap-around

Overlay Hinges, Non-wrap-around

Overlay hinges that do not wrap around the edge of the face frame. Non Wrap Around Overlay Hinges are variable overlay hinges. They may be installed anywhere on the face frame of the cabinet.

Satin Nickel Overlay Hinge

Satin Nickel Overlay Hinge
  • Cabinet hinge made for overlay doors.
  • This versatile hinge solves a lot of retrofit problems because it is a variable overlay hinge. After installation only the hinge pin barrel is visible on the edge of the cabinet door. No screws are visible after installation.
  • This hinge is a variable overlay, it can be installed on any cabinet where the door overlays the cabinet opening by 1/2" or greater.
  • Hinge is self-closing.
  • Matching wood screws are included.
  • Hinge measures approximately 2-3/8" tall by 1-3/4" wide.
  • Hinge needs a minimum of 7/8" on the face frame of the cabinet for installation.
  • The center-to-center screw hole dimension for the hinge wing that mounts on the cabinet face frame is 1-13/16".

Finish:

  • Satin Nickel (also known as Brushed Nickel or Dull Nickel)

Please Note: this item is currently back ordered with the manufacturer. The manufacturer's best estimated lead time for when this product will arrive is mid April. We apologize for the extended lead time.

If you place an order for these hinges we will hold your order and ship them as soon as they become available. If you have any questions, please call us toll free at 877-944-6437.


Click here for Information & Pricing

Oil Rubbed Bronze Overlay Hinge

Oil Rubbed Bronze Overlay Hinge
  • Cabinet hinge made for overlay doors.
  • This versitile hinge solves a lot of retrofit problems because it is a variable overlay hinge. After installation only the hinge pin barrel is visible on the edge of the cabinet door. No screws are visible after installation.
  • This hinge is a variable overlay, it can be installed on any cabinet where the door overlays the cabinet opening by 1/2" or greater.
  • Hinge is self-closing.
  • Matching wood screws are included.
  • Hinge measures approximately 2-3/8" tall by 1-3/4" wide.
  • Hinge needs a minimum of 7/8" on the face frame of the cabinet for installation.
  • The center-to-center screw hole dimension for the hinge wing that mounts on the cabinet face frame is 1-13/16".

Finish:

  • Oil Rubbed Bronze
Click here for Information & Pricing

270 Degree Overlay Hinge (5/8"-7/8" Door Thickness)

270 Degree Overlay Hinge (5/8
  • 270 degree hinge for cabinets with overlay doors.
  • Designed for TV and entertainment units which need wide opening doors.
  • Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
  • Can be recessed (mortised) into door for a sleek look.
  • For doors 5/8" thick if the hinge is not mortised into the door and 7/8" if the hinge is mortised into the door.
  • Solid brass base material.
  • Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1", attachment to backside of door is 1-3/8".
  • Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout).
  • Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.

Finishes:

  • Polished Brass
  • Satin Nickel
Click here for Information & Pricing

270 Degree Overlay Hinge (3/4"-15/16" Door Thickness)

270 Degree Overlay Hinge (3/4
  • 270 degree hinge for cabinets with overlay doors.
  • Designed for TV and entertainment units which need wide opening doors.
  • Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
  • Can be recessed (mortised) into door for a sleek look.
  • For doors 3/4" thick if the hinge is not mortised into the door and 15/16" if the hinge is mortised into the door.
  • Solid brass base material.
  • Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1-5/16", attachment to backside of door is 1-3/8".
  • Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout).
  • Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.

Finishes:

  • Polished Brass
  • Satin Nickel
Click here for Information & Pricing

Overlay Pivot Hinge, Stainless Steel

Overlay Pivot Hinge, Stainless Steel
  • Overlay door pivot hinge, made from Type 430 stainless steel.
  • IMPORTANT, PLEASE NOTE; These hinges are "handed". Order one left hand (SKU 658003)and one right hand hinge (SKU 658017) for each door you are installing.
  • PLEASE NOTE; the handing refers to where the hinge is located not whether the door is a left hand or right hand door. If you order a left hand hinge and a right hand hinge you can hinge either a right hand door or a left hand door.
  • Made for 3/4" thick doors.
  • Maximum door size: 17-23/32" wide 27-9/16" height.
  • These pivots are rated to hold 5.7 lbs per pair.
  • May be used as a 270 degree hinge if the pivot point is located just outside of the cabinet corner.
  • Each hinge uses 6 each #8 flat head screws. Not included but offered for purchase during checkout.

Finishes:

  • Stainless Steel, Natural
Click here for Information & Pricing

Pivot Hinge 270 Degree

Pivot Hinge 270 Degree
  • Made for overlay cabinet doors up to 1" thick
  • Hinge pivots 270 degrees
  • The plate that attaches to the cabinet measures 1-1/4" x 1". The plate that attaches to the door measures 1-3/8" x 7/8". The pivot point projects out 1-7/16" from the cabinet surface
  • Steel base material
  • Screws not included
  • Uses 12 each #6 screws per pair of hinges(not included). We have not been able to find an exact finish match for the screws. We offer solid brass screws upon checkout which is fairly good match for the finish but not an exact match.

Finishes:

  • Antique Brass

Please note: This pivot is currently unavailable. We are looking for a suitable replacement.

Click here for Information & Pricing

Overlay Pivot Hinges, Stainless Steel

Overlay Pivot Hinges, Stainless Steel
  • Pivot hinges made from Type 430 stainless steel.
  • These pivot hinges are available in both Left Hand and Right Hand models and are available in two sizes.
  • May be used as 270 degree hinges if the pivot point is located just outside of the cabinet corner.
  • Available in two sizes; the small size fits up to a 11/16" thick door, the large size fits up to a 7/8" thick door.
  • For each door you are hinging order one left hand hinge and one right hand hinge.
  • Each hinge uses 4 to 6 each #4 flat head screws, not included but offered for purchase during checkout.

Finishes:

  • Natural Stainless Steel
Click here for Information & Pricing

Heavy Duty Reversible Pivot Hinge

Heavy Duty Reversible Pivot Hinge
  • For 1-1/8" to 1-3/8" thick doors
  • Reversible (non-handed) for Right Hand or Left Hand installations
  • For doors up to 60" high (75lb maximum weight)
  • For overlay type installations
  • Made from 0.125" steel
  • Wood screws are included
  • Horizontal piece (as shown in photo) measures 2-1/2" x 1"
  • Vertical flat piece (which mounts to wall) measures 3" x 7/8"
  • Rounded piece projects from wall 2-1/2"
  • Sold by the pair. A pair is what is required to install one door.

Finishes:

  • Satin Chrome
  • Polished Brass
Click here for Information & Pricing

270 Degree Overlay Hinge, No Mortise, 3 Inch

270 Degree Overlay Hinge, No Mortise, 3 Inch
  • For cabinets with overlay doors.
  • Will allow door to open to 270 degrees.
  • Hinge is 3" tall, wrap around part of hinge leaf is 7/8" wide.
  • Made for doors that are from 1" to 1-1/8" thick.
  • Hinge pin is removeable so that door can be removed after installation.
  • Removeable hinge pin also allows inner leaf to be reversed so that it can be used for both left and right hand opening doors.
  • Each hinge uses #6 flat head screws (5 per hinge), screws are not included but are offered for purchase during checkout. Order SKU 272410 screw pack.
  • Made from steel base material and powder coated white.
Click here for Information & Pricing

Overlay Lift-Off Hinge, Solid Brass with Bent Leaf

Overlay Lift-Off Hinge, Solid Brass with Bent Leaf
  • Beautifully finished solid brass lift off hinge.
  • Available in two finishes: Polished brass and Satin Nickel.
  • Hinge will "lift off" of the cabinet after installation.
  • Hinge dimensions (this is a metric designed hinge, these dimension are approximate, may vary by 1/32")
    • Height is 2"
    • Width is 3/4"
    • Bent leaf is 1/2"
    • Hinge thickness is 5/64"
    • Made to fit 3/4" or 13/16" thick door
  • Each hinge uses 6 each #6 flat head wood screws. Screws are not included but are offered for purchase during checkout.
  • This hinge works well for installing an overlay door, minimum side panel thickness needed is 11/16".
  • If installed on an overlay door and such that the hinge pin is aligned just outside of the outside surface of the side panel, the door will open 270 degrees (and lay flat along side the side panel when in the fully open position).
  • Hinge is sold by the EACH. You would normally order 2 (each) hinges to hang one door.
  • Hinge shown in above image is the "Right Hand" version of this hinge.
  • This hinge is handed. Please consult the handing comparison before ordering. The handing comparison can be found by clicking on the link below.
Click here for Information & Pricing