Cabinet Catches and Latches

Cabinet Catches and Latches

  • Our selection of cabinet catches and cabinet latches
  • Including
    • magnetic latches
    • secret latch
    • magnetic touch latch
    • double and single door magnetic latches

Blum Tip On Touch Latch for Self-Closing Doors

Blum Tip On Touch Latch for Self-Closing Doors
  • Blum Tip-On cabinet touch latches open your cabinet door when you give the door a gentle push inward.
  • For use with Self-Closing European hinges only.
    • Works for both overlay and inset doors.
    • Works best for doors that are 12" or wider.
    • For Free Swinging doors see our SKU 268814 or 268816.
  • The Tip-On latch will push the door open wider than most other touch type latches (approximately 1.5"). This allows your hand to reach behind the door and pull it open.
  • To close cabinet door, simply push the door closed. Your existing self-closing hinge will keep the door closed against the cabinet frame. This Blum Tip On does not use magnetic action.
  • Made to be installed in frameless cabinets (cabinets without a face frame).
  • May be installed in face frame cabinets by installing a block of wood behind the cabinet face frame.
  • Made from nylon with bumper tip.
  • This product is sold in components. Please make sure to order one Tip-On and one Holder per door.
    • The Tip-On is SKU 268822.
    • The Holder is available in two types
      • In-Line Type (screw holes are not visible), SKU 268818
      • Wing Type (2 attachment screw holes are visible), SKU 268820
    • Tip on can be installed without a holder
      • Drill a 10mm hole in the cabinet side panel
      • Install the "Tip On" in the 10mm hole
      • See Support Link below for more info on this installation method
  • Screws are not included for either of the Holders. They are offered for purchase during checkout. Order 2 each #6 flat head screws (SKU 652360) per holder.
Click here for Information & Pricing

Blum Tip On Touch Latch for Free Swinging Doors

Blum Tip On Touch Latch for Free Swinging Doors
  • Blum Tip-On cabinet touch latches open your cabinet door when you give the door a gentle push inward.
  • For use with free swinging hinges only.
    • Not for use with self-closing hinges
    • For self-closing doors see our SKU 268038
  • The Tip-On latch will push the door open wider than most other touch type latches.
  • To close cabinet door, simply push the door closed, a magnet at the end of the push rod will keep the door in the closed position.
  • Made to be installed in frameless cabinets (cabinets without a face frame).
  • May be installed in face frame cabinets by installing a block of wood behind the cabinet face frame.
  • This product is sold in components. Please make sure to order one Tip-On and one Holder per door.
    • The Tip-On is available in two sizes
      • Standard Duty, SKU 268814 (for door heights less than 48")
      • Heavy Duty, SKU 268816 (for door heights 48" or more)
    • The Holder is available in two types
      • In-Line Type (screw holes are not visible), SKU 268818
      • Wing Type (2 attachment screw holes are visible), SKU 268820
    • Tip on can be installed without a holder
      • Drill a 10mm hole in the cabinet side panel
      • Install the "Tip On" in the 10mm hole
      • See Support Link below for more info on this installation method
  • Strike plates (a self sticking plate and a screw on plate and screw) are included with purchase of a Tip-On (SKU's 268814 or SKU 268816).
  • Screws are not included for either of the Holders. They are offered for purchase during checkout. Order 2 each #6 flat head screws (SKU 652360) per holder.
Click here for Information & Pricing

Elbow Catch, Small Model

Elbow Catch, Small Model
  • Elbow catch for cabinet doors.
  • An elbow catch is typically used for cabinets which have two doors covering an opening.
    • One door uses an elbow catch to secure the door in the closed position.
    • The second door is secured using a touch latch, magnetic latch or a friction catch.
    • To open the doors, first open the door with the touch, magnetic or friction catch, then reach in behind the door and release the elbow catch.
  • Measurements
    • Catch mounting plate measures 3/4" x 1-1/16".
    • Projection is 1-1/8"
    • Strike plate measures approximately 1/2" x 1".
  • Made from stamped steel.
  • Pan head screws and brads are included.
  • Sold and priced by the pack. A pack includes two catches, two strikes, screws and brads.
Click here for Information & Pricing

Elbow Catch

Elbow Catch
  • Elbow catch for cabinet doors.
  • An elbow catch is typically used for cabinets which have two doors covering an opening.
    • One door uses an elbow catch to secure the door in the closed position.
    • The second door is secured using a touch latch, magnetic latch or a friction catch.
    • To open the doors, first open the door with the touch, magnetic or friction catch, then reach in behind the door and release the elbow catch.
  • Measurements
    • Catch mounting plate measures 5/8" x 1-3/8".
    • Projection is 1-1/2"
    • Strike plate measures approximately 3/4" x 5/8".
  • Made from aluminum with some steel components.
  • Pan head screws are included.
Click here for Information & Pricing

Cabinet Friction Catch

Cabinet Friction Catch
  • Friction catch for cabinet doors that are free swinging (non-self closing)
  • Made from a zinc material
  • Catch measures 1-1/4" in length, 1" in width, and 3/8" in projection
  • Strike measures 7/16" in projection
Click here for Information & Pricing

Cabinet Touch Latch

Cabinet Touch Latch
  • Touch latch for cabinet doors.
  • Touch latch holds the door in the closed position when you push it closed.
  • To release the touch latch simply push on the door and the latch releases.
  • Latch measures approximately 2-1/8" long by 1-1/8" wide. Projection is 7/8" (closed) and 1-5/8" open.
  • Includes latch strike plate, made from white nylon.
  • Latch is made of steel with nylon roller and strike.
  • Image shows latch in the open or released position.
  • Each latch uses 6 number 4 round head screws. Not included but offered for purchase during checkout. We do not stock any brass round head screws. We only have stainless steel pan head screws available for this product.
Click here for Information & Pricing

Mini Touch Latch

Mini Touch Latch
  • Mini touch latch for cabinets
  • Latch installs on the underside of shelf or cabinet wall.
  • Strike plate installs on the back of the door.
  • Touch latches are concealed when the door is in the closed position.
  • To open the cabinet, give the door an inward push, the latch will spring the door slightly open.
  • Made from steel with nylon parts.
  • Matching screws are included.

Finishes

  • Brass plated with brown strike plate and roller
  • Zinc Chromate with white strike plate and roller
Click here for Information & Pricing

Double Ball Catch, Solid Brass

Double Ball Catch, Solid Brass
  • Double ball catch for cabinet doors.
  • Solid brass ball catch features two spring loaded ball bearings.
  • Spring power is adjustable.
  • Ball catch can be surface mounted or mortised into cabinetry.
  • Made from solid brass material with steel ball bearings. PLEASE NOTE: ball bearings will rust if used in corrosive or marine environment.
  • Available in 4 sizes (measurements taken in closed position)
    • SKU 286230 measures 1-11/16"height by 5/16" wideby 1/2" tall. Uses 4 each #5flat head wood screws (not included).
    • SKU 286232 measures 1-15/16"height by 11/32" wide by 1/2" tall. Uses 4 each #5 flat head wood screws (not included).
    • SKU 286234 measures 2-5/16"height by 5/16" wide by 5/8" tall. Uses 4 each #6 flat head wood screws (not included).
    • SKU 286236 measures 2-11/16"height by 1/2" wide by 21/32" tall. Uses 4 each #6 flat head wood screws (not included).
  • Flat head brass wood screws are offered for purchase during checkout.
Click here for Information & Pricing

Double Magnetic Cabinet Catch

Double Magnetic Cabinet Catch
  • Double magnetic catch is used for double door cabinets
  • Magnetic catches are used on cabinets with free swinging (non self-closing) hinges
  • Measures 3-3/8" long by 1" wide by 1/2" tall
  • Steel base material
  • Mounting screws are included

Finishes:

  • Zinc plated
Click here for Information & Pricing

Brown Plastic Magnetic Catch

Brown Plastic Magnetic Catch
  • Used on cabinets with free swinging (non-self closing) doors
  • Catch measures 2" long by 1-1/4" wide by 1/2" tall
  • Mounting screws are included
  • Plastic and steel base material

Finishes:

  • Brown plastic
Click here for Information & Pricing

Black Plastic Magnetic Catch

Black Plastic Magnetic Catch
  • Used on cabinet doors that are free swinging (non-self closing)
  • Catch measures approximately 1-3/4" by 7/8" by 5/8" tall
  • Screws and strike are included
  • Black finish
Click here for Information & Pricing

Black Magnetic Catch, Two Part

Black Magnetic Catch, Two Part
  • Used on cabinet doors that are free swinging (non-self closing)
  • Catch measures approximately 1-3/4" by 1/2" by 3/8" tall
  • Magnetic catch is mostly black, strike is zinc chromate plated
  • IMPORTANT PLEASE NOTE:
    • This catch is made up of two parts (the catch and the strike plate). They are ordered separately. Make sure to order one of each for each door you are installing them on.
    • Fasteners are NOT included and must be ordered separately
      • For the strike plate order our #4 x 3/8" zinc plate screw (SKU 135100, order one per strike plate)
      • For the magnetic catch order our #6 x 1/2" black pan head screw (SKU 344200, order two per mag catch)
      • Screws are offered for purchase during checkout
Click here for Information & Pricing

Aluminum Magnetic Catch

Aluminum Magnetic Catch
  • Magnetic catches are used on cabinets with free swinging (non self-closing) hinges
  • Catch measures 2" long by 1-1/4" wide by 5/8" tall
  • Aluminum base material
  • Mounting screws are included

Finishes:

  • Natural aluminum
Click here for Information & Pricing

Magnetic Touch Latch

Magnetic Touch Latch
  • Magnetic touch latch for cabinet doors
  • When you push in on cabinet door, door pops out and is released from magnetic hold.
  • Includes mounting screws and steel plate for inside of cabinet door.
  • Size is approximately 1-3/4" long by 1-3/4" wide by 3/4" projection.

Finishes:

  • Brown plastic
  • White Plastic
Click here for Information & Pricing

Magnetic Touch Latch, Long Throw

Magnetic Touch Latch, Long Throw
  • Magnetic touch latch with long throw
  • Made for medium size doors
  • Latch is not visible, when door is in closed position.
  • Available in two finishes
    • White nylon
    • Brown nylon
  • Image shows White nylon touch latch with latch in closed position
  • Image shows Brown nylon touch latch with latch in the open position
  • Magnetic force is 5.2 lbs
  • For more information on dimensions and installation, click on link below
  • This product complies with the Consumer Product Safety Information Act (CPSIA) for lead content.
  • Installation fasteners are included.
Click here for Information & Pricing

Secret Gate Latch

Secret Gate Latch
  • It is known as a "Secret Gate Latch".
  • Used in banks, offices, restaurants and bars as a latch to secure a hinged countertop.
  • Can also be used on gates and doors that swing horizontally.
  • Because the button to unlatch it is not obvious it acts as a low security device.
  • It can be used on any hinged device where you can reach around and access the button on the latch.
  • Made from aluminum with some steel parts.
  • Latch is reversible (open device and flip latch over to reverse)
  • Gap must be no more than 1/4" for latch to work (latch projects 3/8").
  • Latch is 3.5" long and 2" wide. Strike is 3/4" long and 2" wide. Latch is approximately 5/8" thick.
  • Oval head wood screws are included.
  • INSTALLATION NOTE: If the latch is used on a lift-up countertop, the installation requires that you reverse the latch so that it acts like a dead bolt rather than an auto retracting latch. This is necessary for lift-up installations because the bolt helps to support the non-hinged end of the countertop when it is in the down or closed position. This also means that when the countertop is closed, you must push the latch button so that you are manually retracting the latch or bolt.

Finishes:

  • Sprayed Aluminum Finish (similiar to polished chrome)
Click here for Information & Pricing