Thick Door European Style Hinges

Thick Door European Style Hinges

  • Blum and Salice Brand European hinges made for doors that are thicker than normal.
  • Available in Straight Arm, Half Cranked and Full Cranked styles.

Blum Thick Door Hinges, 35mm Cup

Blum Thick Door Hinges, 35mm Cup
  • Blum's Thick Door Hinges.
  • Fits a 35mm (1-3/8") hinge cup.
  • For door thicknesses from 19 mm to 30 mm (3/4" to 1-1/8").
  • Opening angle is 95 degrees.
  • Available in three types
    • Straight Arm for Overlay Doors
    • Half Cranked for Twin Overlay Doors
    • Full Cranked for Inset Doors
Click here for Information & Pricing

Salice Thick Door Hinges, 40mm Cup

Salice Thick Door Hinges, 40mm Cup
  • Salice's Thick Door Hinges.
  • Fits a 40mm (approximately 1-9/16") hinge cup.
  • For door thicknesses from 19 mm to 35 mm (3/4" to 1-1/2").
  • Opening angle is 94 degrees.
  • Available in three types
    • Straight Arm for Overlay Doors
    • Half Cranked for Twin Overlay Doors
    • Full Cranked for Inset Doors
Click here for Information & Pricing

Blum 155 Degree Straight Arm Hinge

Blum 155 Degree Straight Arm Hinge
  • This hinge is Blum's 155 degree straight arm hinge. It is used for the following:
    • a 155 degree zero protrusion hinge (click on link below to go to our page for this application)
    • a 155 degree hinge used for special applications (click on links below for more information)
      • thick door applications (up to 25mm or about 31/32" thick)
      • large overlays up to 34mm (1.34 inches).
      • mitred doors with large overlays.
      • doors which have had thin facings added.
      • with all installations of this hinge, trial applications are highly advised.
  • Hinge is a self closing hinge. Self closing action starts at 30 degrees.
  • Hinge is adjustable 3-ways after installation.
  • The hinge installs in a 35mm (1-3/8") cup drilled in the back of the door.
  • With all of the above uses of this hinge, it uses our mounting plate SKU 652296.
    • IMPORTANT: This item is not included and must be ordered separately.
    • It is offered for purchase when checking out.
  • Installs in both Face Frame Cabinets and Frameless Cabinets.
  • Uses Blum #6 screws (2 per hinge, 2 per mounting plate), not included but offered for purchase during checkout.
  • Optional Items
    • Restriction clips: optional clips are available if you need to restrict the opening angle of the hinge. These clips are offered for purchase during checkout:
      • 92 degree clip is our SKU 268774
      • 110 degree clip is our SKU 268772
    • Soft close: If you would like the door to close softly without slamming Blumotion is available for this hinge. Order our SKU 268771 (one per hinge). This item is offered for purchase during checkout.

Click here for Information & Pricing

Plastic Dowels and Dowel Screws for Blum Hinges

Plastic Dowels and Dowel Screws for Blum Hinges
  • Plastic dowel and dowel screw for European hinge push-in type installations.
  • Used on manufactured wood products where wood screws do not hold well.
  • Plastic dowel and dowel screw are sold separately.
  • Dowel measures 21/64" diameter by 27/64" long (or 8mm by 11mm).
  • Dowel screw is a #6 flat head screw and is 1/2" in length.
  • Drill bit size for the plastic dowel is 8 mm or 5/16" (drill bit is not included).
  • This item is available in a 50 pack (50 screws and 50 dowels). Order SKU 701210.

Finishes:

  • Dowel is made of white plastic
  • Dowel screw is steel and nickel plated.
Click here for Information & Pricing

European and Blum Hinges Screw

European and Blum Hinges Screw
  • Flat head phillips type screw.
  • Specially made for European and Blum hinges.
  • Steel base material.
  • The #6 screw is for most European hinges and mounting plates.
  • The #7 screw is for Blum Face Frame Mounting Plates.
  • Sold by the "Each" or by the "Pack". There are 50 screws in a pack.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

Back-to-Back Screws

Back-to-Back Screws
  • This screw is for European hinges used on "Back-to-Back" or "Twin Overlay" doors where the hinges are installed back-to-back on the side panel. The back-to-back installation will cause regular screws to interfere with each other.
  • Maximum length of screw is 1-1/16". Mimimum length of screw is 13/16".
  • Flat style screw head is a #6.
  • Female shaft outside diameter is 3/16".
  • Male screw is steel. Female screw is non-ferrous.
  • For each screw needed order one male screw (SKU 268250) and one female screw (SKU 268251).

Finishes:

  • Nickel Plated
Click here for Information & Pricing