Blum Modul Mounting Plates

Blum Modul Mounting Plates

  • Mounting plates made for Blum Modul hinges.
  • Available in frameless and face frame applications.

Blum Face Frame Mounting Plate for Modul Hinges

Blum Face Frame Mounting Plate for Modul Hinges
    • Blum's Modul type Face Frame mounting plate
      • Made for Blum Modul hinges.
      • 0 mm plate height.
    • PLEASE NOTE THAT THIS MOUNTING PLATE HAS BEEN DISCONTINUED BY BLUM. READ BELOW FOR MORE INFORMATION:
      • There is no replacement for Modul Face Frame mounting plate
      • The only solution that we know of is to replace your existing hinge and mounting plate with Blum's newer "Clip Top" hinge and mounting plate.

    If you have a 170 degree Modul hinge, you can use our SKU 652300 hinge and our SKU 652304 mounting plate. You will need to replace both hinges and both mounting plates on the door as mixing an old hinge with a new one will cause the door to bind.

    If you have a 100 degree Modul hinge, you can use our SKU 701140 hinge (this is a 110 degree hinge) and our SKU 652304 mounting plate. You will need to replace both hinges and both mounting plates on the door as mixing an old hinge with a new one will cause the door to bind.

    You can find these items by typing the SKU numbers into the Seach box at the top of this web page.

    Click here for Information & Pricing

    Blum Frameless Mounting Plate for Modul Hinges

    Blum Frameless Mounting Plate for Modul Hinges
    • Frameless cabinet mounting plate, made for Blum Modul hinges.
    • 0 mm plate height.
    • Cast metal construction.
    • These plates are for frameless cabinets (cabinets without a face frame). Plate attaches to cabinet side panel.
    • Allows a height adjustment of plus or minus 2 mm after installation.
    • Each plate uses two each #6 European hinge screws (our 652360). Screws are not included but are offered for purchase during checkout.
    Click here for Information & Pricing

    Blum Frameless Mounting Plates for Modul Hinge

    Blum Frameless Mounting Plates for Modul Hinge
    • Frameless cabinet mounting plate, made for Blum Modul hinges.
    • 0 mm plate height.
    • Stamped steel construction.
    • These plates are for frameless cabinets (cabinets without a face frame). Plate attaches to cabinet side panel.
    • Allows a height adjustment of plus or minus 2 mm after installation.
    • Each plate uses two each #6 European hinge screws (our 652360). Screws are not included but are offered for purchase during checkout.
    Click here for Information & Pricing

    Blum Mounting Plate for Pie Cut Corner Doors

    Blum Mounting Plate for Pie Cut Corner Doors
    • Blum mounting plate for pie cut corner doors. Also used for non-pie cut corner doors.
    • This mounting plate attaches to a cutout in the cabinet face frame.
    • It is used with Blum's "Modul"170 degree (SKU 652000) and 100 degree hinges (SKU 652001). Does not work with Blum's "Clip Top" style hinges).
    • The hinge attaches to the mounting plate with a screw rather than the current clip on system.
    • In the case of a pie cut corner installation, this mounting plate holds the two doors to the cabinet face frame.
    • Each plate uses 2 each #6 screws (not included but offered for purchase during checkout).
    Click here for Information & Pricing