Blum Modul Hinges

Blum Modul Hinges

Blum Modul Hinges attach to Blum Modul Mounting plates with a machine screw rather than the newer and easier method of clipping or snapping the hinge to the mounting plate.

Blum 170 Degree Modul Hinge

Blum 170 Degree Modul Hinge
  • 170 Degree Modul style hinge by Blum
  • Mounting Plates for this hinge must be ordered separately. Mounting Plates availablefor this hinge:
    • Blum's "Special Face Frame Mounting Plate" (our SKU 701100). This special mounting plate is offered for purchase during checkout.
    • Blum's Modul Frameless mounting plate (our SKU 652005). This mounting plate is offered for purchase during checkout.
  • If you are doing new construction we highlyrecommend that you use Blum's newer Clip Top Hinges rather than these older style Modul Hinges.
  • Each hinge uses 2 each #6 screws. Screws are not included but are offered for purchase during checkout.
  • PLEASE NOTE: If you are going to use your existing Modul mounting plates to install this hinge the machine screw that attaches the hinge to the mounting plate is part of your existing mounting plate. That screw is not included with this hinge

Accesories available for this hinge (Offered for purchase at check-out):

  • Mounting plates: Available for face frame and frameless application.
  • #6 flat head screws, required for installation (SKU 652360).
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 268368)
  • Touch Latch (SKU 268038)
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)

Please note: Blum's Modul Face Frame mounting plate has been discontinued. If you have a face frame application, you will need to switch to the new clip top style hinge.

Click here for Information & Pricing

Blum 100 Degree Modul Hinge

Blum 100 Degree Modul Hinge
  • 100 Degree Modul style hinge by Blum
  • Mounting Plates for this hinge must be ordered separately. Mounting Plates available for this hinge:
    • Blum's "Special Face Frame Mounting Plate" (our SKU 701100). This special mounting plate is offered for purchase during checkout.
    • Blum's Modul Face Frame mounting plate (our SKU 652008). This mounting plate is offered for purchase during checkout.
    • Blum's Modul Frameless mounting plate (our SKU 652005). This mounting plate is offered for purchase during checkout.
  • If you are doing new construction we highly recommend that you use Blum's newer Clip Top Hinges rather than these older style Modul Hinges.
  • Each hinge uses 2 each #6 screws. Screws are not included but are offered for purchase during checkout.
  • PLEASE NOTE: If you are going to use your existing Modul mounting plates to install this hinge the machine screw that attaches the hinge to the mounting plate is part of your existing mounting plate. That screw is not included with this hinge.

Accesories available for this hinge (Offered for purchase at check-out):

  • Mounting plates: Available for face frame and frameless application.
  • #6 flat head screws, required for installation (SKU 652360).
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 268368)
  • Touch Latch (SKU 268038)
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)
Click here for Information & Pricing

Blum Face Frame Mounting Plate for Modul Hinges

Blum Face Frame Mounting Plate for Modul Hinges
    • Blum's Modul type Face Frame mounting plate
      • Made for Blum Modul hinges.
      • 0 mm plate height.
    • PLEASE NOTE THAT THIS MOUNTING PLATE HAS BEEN DISCONTINUED BY BLUM. READ BELOW FOR MORE INFORMATION:
      • There is no replacement for Modul Face Frame mounting plate
      • The only solution that we know of is to replace your existing hinge and mounting plate with Blum's newer "Clip Top" hinge and mounting plate.

    If you have a 170 degree Modul hinge, you can use our SKU 652300 hinge and our SKU 652304 mounting plate. You will need to replace both hinges and both mounting plates on the door as mixing an old hinge with a new one will cause the door to bind.

    If you have a 100 degree Modul hinge, you can use our SKU 701140 hinge (this is a 110 degree hinge) and our SKU 652304 mounting plate. You will need to replace both hinges and both mounting plates on the door as mixing an old hinge with a new one will cause the door to bind.

    You can find these items by typing the SKU numbers into the Seach box at the top of this web page.

    Click here for Information & Pricing

    Blum Frameless Mounting Plate for Modul Hinges

    Blum Frameless Mounting Plate for Modul Hinges
    • Frameless cabinet mounting plate, made for Blum Modul hinges.
    • 0 mm plate height.
    • Cast metalconstruction.
    • These plates are for frameless cabinets (cabinets without a face frame). Plate attaches to cabinet side panel.
    • Allows a height adjustment of plus or minus 2 mm after installation.
    • Each plate uses two each #6 European hinge screws (our 652360). Screws are not included but are offered for purchase during checkout.
    Click here for Information & Pricing

    Blum Frameless Mounting Plates for Modul Hinge

    Blum Frameless Mounting Plates for Modul Hinge
    • Frameless cabinet mounting plate, made for Blum Modul hinges.
    • 0 mm plate height.
    • Stamped steel construction.
    • These plates are for frameless cabinets (cabinets without a face frame). Plate attaches to cabinet side panel.
    • Allows a height adjustment of plus or minus 2 mm after installation.
    • Each plate uses two each #6 European hinge screws (our 652360). Screws are not included but are offered for purchase during checkout.
    Click here for Information & Pricing

    Blum Special Face Frame Mounting Plate

    Blum Special Face Frame Mounting Plate
    • Blum mounting plate for pie cut corner doors. Also used for non-pie cut corner doors.
    • This mounting plate attaches to a cutout in the cabinet face frame.
    • It is used with Blum's Modul 170 degree hinge (Our SKU 652000)and Blum's Modul 100 degree hinge (SKU 652001). This plate will not work with Blum's Clip Top Hinges. These two Modul hinges are offered for purchase during checkout.
    • The hinge attaches to the mounting plate with a screw rather than the current clip on system.
    • In the case of a pie cut corner installation, this mounting plate holds the two doors to the cabinet face frame.
    • You might find this number stamped on the underside of this mounting plate: 199 010-01.01.
    • Each plate uses 2 each #6 screws (not included but offered for purchase during checkout).
    Click here for Information & Pricing