Blum Mini Hinges (26mm)

Blum Mini Hinges (26mm)

  • Blum Mini Hinges are for doors with a narrow style.
  • An example of a narrow style might be on a glass door with a narrow frame (style) around the glass.
  • These hinges use a 26mm cup drilled in the back of the door.26 mm is slightly larger than 1".

Blum Mini Hinge, Straight Arm

Blum Mini Hinge, Straight Arm
  • Blum mini European hinge for Overlay Doors.
  • These hinges can be installed on Frameless Cabinets or Face Frame Cabinets.
  • Mini hinges are made for doors with a narrow style (framing) or for smaller sized doors.
  • Hinges feature a 94 degree opening angle and are self-closing hinges.
  • They fit into a 26mm (approximately 1") cup drilled in the back of the door. Cup depth is 12.5mm.
  • PLEASE NOTE: if you are using these hinges for new construction you must use a 26mm drill bit to drill the hinge cup. A 1" drill bit will not work.
  • These hinges work with Blum's regular mounting plates (either Face Frame plates or Frameless Plates).
  • Center to center screwhole spacing for the hinge is 38mm (1-1/2").
  • PLEASE NOTE: European hinges are made up of two parts: the hinge and a mounting plate. You would normally order two hinges and two mounting plates per door.
  • The hinges use two #6 flat head screws each. Screws and mounting plates are offered for purchase during checkout

Accessories available for this hinge (Offered for purchase at check-out):

  • Mounting plates for frameless applications, required for installation.
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 268368)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268004)
  • Touch Latch (SKU 268038).
Click here for Information & Pricing

Blum Mini Hinge, Half Cranked

Blum Mini Hinge, Half Cranked
  • Blum mini European hinges for twin overlay (back-to-back) doors on frameless cabinets or for inset doors on face frame cabinets.
  • Also can be used on partial overlay doors on face frame cabinets.
  • Mini hinges are made for doors with a narrow style (framing) or for smaller sized doors.
  • Hinges feature a 94 degree opening angle and are self-closing hinges.
  • They fit into a 26mm (approximately 1") cup drilled in the back of the door. Cup depth is 12.5mm.
  • PLEASE NOTE: if you are using these hinges for new construction you must use a 26mm drill bit to drill the hinge cup. A 1" drill bit will not work.
  • These hinges work with Blum's regular mounting plates (either Face Frame plates,Frameless Plates or Face Frame Adapter plate).
  • Center to center screwhole spacing for the hinge is 38mm (1-1/2").
  • PLEASE NOTE: European hinges are made up of two parts: the hinge and a mounting plate. You would normally order two hinges and two mounting plates per door.
  • The hinges use two #6 flat head screws each. Screws and mounting plates are offered for purchase during checkout.

Accessories available for this hinge (Offered for purchase at check-out):

  • Mounting plates for face frame orframeless applications, required for installation.
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 268368)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268004)
  • Touch Latch (SKU 268038).
Click here for Information & Pricing

Blum Mini Hinge, Full Crank

Blum Mini Hinge, Full Crank
  • Blum mini European hinge for Inset Doors on frameless cabinets..
  • Mini hinges are made for doors with a narrow style (framing) or for smaller sized doors.
  • Hinges feature a 94 degree opening angle and are self-closing hinges.
  • They fit into a 26mm (approximately 1") cup drilled in the back of the door. Cup depth is 12.5mm.
  • PLEASE NOTE: if you are using these hinges for new construction you must use a 26mm drill bit to drill the hinge cup. A 1" drill bit will not work.
  • These hinges work with Blum's regular frameless mounting plates.
  • Center to center screwhole spacing for the hinge is 38mm (1-1/2").
  • PLEASE NOTE: European hinges are made up of two parts: the hinge and a mounting plate. You would normally order two hinges and two mounting plates per door.
  • The hinges use two #6 flat head screws each. Screws and mounting plates are offered for purchase during checkout..

Accessories available for this hinge (Offered for purchase at check-out):

  • Mounting plate forframeless applications, required for installation (SKU 652296).
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 268368)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268004)
  • Touch Latch (SKU 268038).
Click here for Information & Pricing