accredited business BBB Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts
Blum European Hinge for Inset Face Frame Doors
Product Information & Specifications
- Using an adapter plate and a half cranked hinge it is possible to install a European concealed hinge on an inset door on a face frame cabinet.
- This adapter plate can be used with any of the following hinges that we stock:
- SKU 701122 Blumotion soft close 110 degree hinge
- SKU 652308 Self-closing 120 degree hinge
- SKU 701141 Self-closing 110 degree hinge
- SKU 701154 Free-swinging 110 degree hinge (should be used with a touch latch to keep the door closed)
- For each hinge set needed order one each SKU 268225 (Face Frame Adapter Plate) and one each SKU 652308 (or one of the above listed hinges). For a typical cabinet size door you would order 2 adapter plates and 2 hinges. The SKU 268225 Face Frame Adapter Plate is offered for purchase during checkout.
- Screws are not included but are offered for purchase during checkout. Order two Blum screws per hinge and order two #8 pan head sheet metal screws per adapter plate.
- After installation the door is completely adjustable.
- Hinge requires a 35mm (1-3/8") cup drilled in back of door. See installation information below for recommended bore distances.
- To drill the angled holes for the adapter plate the purchase of the Blum Platemate is highly recommended. The Blum Platemate clamps on the edge of the face frame and allows accurate drilling of the adapter plate screw holes. The Platemate includes a drill bit and drill bit extension for a #8 drill bit (2.5mm bit).The Blum Platemate (SKU 268227) is offered for purchase during checkout for the Adapter Plate. PLEASE NOTE: THE BLUM PLATEMATE IS A NON-RETURNABLE ITEM.
Accessories available for this hinge (Offered for purchase at check-out):
- Mounting plates for frameless or face frameapplications, required for installation.
- #6, flat head screws, required for installation (SKU 652360)
- Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
- Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268002)
- Hinge cup cap, covers hinge cup and screws, dresses up the hinge (SKU 701114)
- Soft Close Add-on Device, eliminates slamming of the door, dampens closing action (SKU 268233)
- Touch Latch (SKU 268038).
- 35mm Forstner Bit, for new installations (SKU 204000)
- Ecodrill, installation jig, for new installations (SKU 701000)
Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts