Blum 170 Degree Hinge, Frameless Cabinets

Blum 170 Degree Hinge, Frameless Cabinets

  • This is the Frameless cabinet section.

    • Frameless cabinets use a "cross" shaped mounting plate.
    • The plate attaches to the surface of the cabinet side panel, as in the photo.
    • This hinge is excellent for new construction or as a replacement for just about any brand of current or obsolete 165, 170 or 175 degree straight arm European hinge.

  • Blum 170 Degree Hinge for Overlay, Frameless Cabinets

    Blum 170 Degree Hinge for Overlay, Frameless Cabinets
    • Blum 170 Degree Straight Arm Hinge.
    • This page shows the hinge used on a "Frameless" cabinet with an "Overlay" Door.
    • This is Blum's most popular and common "Standard" European 170 degree hinge. By using the overlay chart at the link below and choosing the correct mounting plate for the "bore distance" drilled on your door, you can use this hinge to replace just about any brand of current or obsolete standard European 165 or 170 degree hinge (straight arm type). When replacing existing hinges, always replace both hinges and both mounting plates on the door. Mixing different brands and types of European hinges can cause door binding problems.
    • Door Overlay
      • The overlay is achieved using a combination of the hinge bore distance and the mounting plate that you chose.
        • The bore distance is the distance from the edge of the cup drilled in the back of the door and the edge of the door.
        • With this hinge, you can use any bore distance from 3 mm to 8 mm (1/8" to 5/16").
      • Mounting plates, use oneof the following mounting plates for face frame cabinets:
        • SKU 652296 (Blum's 0 mm frameless plate)
        • SKU 652301 (Blum's 3 mm frameless plate)
        • SKU 652303 (Blum's 6 mm frameless plate)
        • SKU 652302 (Blum's 9 mm frameless plate)
      • Possible overlay dimensions that can be achieved:5 mm to 19 mm (3/16" to 3/4")
      • Click on the link below for more detailed information about choosing your bore distance, overlay and mounting plate.
    • Available in two models:
      • Self-Closing (SKU 652300). Self-closing hinges do not require a cabinet catch. This is by far the most common of the two.
      • Free-Swinging (SKU 701170). Free-swinging hinges require a cabinet catch or a touch latch on the door.
    • Hinge is made from nickel plated steel.
    • Hinge fits into a 35 mm (1-3/8") cup drilled in the back of the door. Cup depth is 13 mm (1/2").
    • The center-to-center screw hole dimension on the hinge cup is 45 mm (1-3/4). If your current hinge is 1-3/4" or the less common 1-7/8" you can install this hinge without re-drilling the screw holes. For 1-7/8" screw hole dimensions, the screw will go in at a slight angle but usually works without a problem.
    • Each hinge uses 2 each #6 flat head screws (screws are not included but are offered for purchase during checkout).
    • IMPORTANT PLEASE READ:
      • European hinges are a two part hinge made up of the hinge AND a mounting plate.
      • The mounting plate is a separately ordered item.
      • To chose the mounting plate consult the overlay table at the link below
      • Mounting plates are offered for purchase during checkout

    Optional Accessories (offered for purchase during checkout)

    • Mounting plates for fameless and face frame mounting applications, required for installation.
    • #6 flat head screws (SKU 652360).
    • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
    • Soft Close Add-on Device, eliminates slamming of the door, dampens closing action- not for usewith the Free Swinging hinge(SKU 268234)
    • Opening Angle Restriction Clip, restricts door opening to 130 degrees (SKU 652033)
    • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268003)
    • Touch Latches.
    • 35mm Forstner Bit, for new installations (SKU 204000)
    • Ecodrill, installation jig, for new installations (SKU 701000)
    Click here for Information & Pricing

    Blum 170 Degree Hinge for Inset Doors, Frameless Cabinets

    Blum 170 Degree Hinge for Inset Doors, Frameless Cabinets
    • Blum 170 degree half cranked hinge.
    • For use on Frameless Cabinets with inset doors.
    • This hinge is excellent for new construction or as a replacement for just about any brand of current or obsolete 165, 170 or 175 degree half cranked European hinge.
    Click here for Information & Pricing

    Blum 170 Degree Hinge for Back-to-Back Doors, Frameless Cabinets

    Blum 170 Degree Hinge for Back-to-Back Doors, Frameless Cabinets
    • Blum 170 Degree Half Cranked Hinge.
    • This page shows the hinge used on a "Frameless" cabinet with "Back-to-Back" Doors.
    • Hinge is self-closing.
    • This hinge and mounting plate will replace just about any current or obsolete hinge of the same type.
    Click here for Information & Pricing