accredited business BBB Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts
Frequently Asked Questions
  • Can you match my screw hole patterns?

  • How much is shipping?

  • What is a pair of hinges?

  • How do I estimate hinge weight capacity?

  • What about Installation Instructions?

Blum 110 Degree Hinge for Overlay, Frameless Cabinets

Blum 110 Degree Hinge for Overlay, Frameless Cabinets

Product Information & Specifications

  • Blum 110 Degree Straight Arm Hinge.
  • This page shows the hinge used on a "Frameless" cabinet with an "Overlay" door.
  • This is Blum's most popular and common "Standard" European hinge. By using the overlay chart at the link below and choosing the correct mounting plate for the "bore distance" drilled on your door, you can use this hinge to replace just about any brand of current or obsolete standard European hinge (straight arm type). When replacing existing hinges, always replace both hinges and both mounting plates on the door. Mixing different brands and types of European hinges can cause door binding problems.
  • Door Overlay
    • The overlay is achieved using a combination of the hinge bore distance and the mounting plate that you choose.
      • The bore distance is the distance from the edge of the cup drilled in the back of the door and the edge of the door.
      • You can use any bore distance from 3 mm to 7 mm (1/8" to 9/32").
    • Mounting plates are ordered separately, use one of the following mounting plates for"frameless" cabinets
      • SKU 652296 (Blum's 0 mm frameless plate)
      • SKU 652301 (Blum's 3 mm frameless plate)
      • SKU 652303 (Blum's 6 mm frameless plate)
      • SKU 652302 (Blum's 9 mm frameless plate)
    • Possible overlay dimensions that can be achieved: 5 mm to 18 mm (3/16" to 23/32")
    • After installation the overlay can be adjusted plus or minus 2 mm.
    • Click on the link below for more detailed information about choosing your bore distance, overlay and mounting plate.
  • Hinge is made from nickel plated steel.
  • Hinge fits into a 35mm (1-3/8") cup drilled in the back of the door. Cup depth is 13 mm (1/2").
  • Available in two models:
    • Self-Closing (SKU 701140). Self-closing hinges do not require a cabinet catch. This is by far the most common of the two.
    • Free-Swinging (SKU 701152). Free-swinging hinges require a cabinet catch or a touch latch on the door.
  • The center-to-center screw hole dimensions on the hinge cup are 45 mm (1-3/4"). If your current hinge is 1-3/4" or the less common 1-7/8" you can install this hinge without re-drilling the screw holes. For 1-7/8" screw hole dimensions, the screw will go in at a slight angle but usually works without a problem.
  • Each hinge uses 2 each #6 flat head screws (screws are not included but are offerered for purchase during checkout).
    • European hinges are a two part hinge made up of the hinge AND a mounting plate.
    • The mounting plate is a separately ordered item.
    • To chose the mounting plate consult the overlay table at the link below
    • Mounting plates are offered for purchase during checkout

Accessories available for this hinge (Offered for purchase at check-out):

  • Mounting plates for frameless and face frame applications, required for installation.
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
  • Restriction clip. Limits angle of opening to 86 degrees (SKU 701113)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268001)
  • Hinge cup cap, covers hinge cup and screws, dresses up the hinge (SKU 701156)
  • Soft Close Add-on Device, eliminates slamming of the door, dampens closing action (SKU 268230)
  • Touch Latch (SKU 268038).
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)
Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts

110 Degree, Straight ArmSelf ClosingDiscounts
Quantity Discounts for SKU 701140
110 Degree, Straight ArmFree SwingingDiscounts
Quantity Discounts for SKU 701152
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review