accredited business BBB Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts
Frequently Asked Questions
  • What about Installation Instructions?

  • How do I estimate hinge weight capacity?

  • Can you match my screw hole patterns?

  • How much is shipping?

  • What is a pair of hinges?

Blum "110 Plus" Hinge for Overlay, Face Frame Cabinets

Blum "110 Plus" Hinge for Overlay, Face Frame Cabinets

Product Information & Specifications

  • Blum "110 Plus" Straight Arm Hinge
  • This hinge is the same as the Blum 110 hinge but it has the following additional features:
    • it accomodates a larger overlay, up to 22 mm (nearly 7/8").
    • It can be used in combination with Blum's 110 degree hinge with Blumotion (our SKU 701120) on the same door.
  • This page features the hinge used on a "Face Frame" cabinet with an "Overlay" door.
  • Door Overlay
    • The overlay is achieved using a combination of the hinge "bore distance" and the mounting plate that you choose:
      • The bore distance is the distance from the edge of the cup drilled in the back of the door and the edge of the door.
      • You can use any bore distance from 3 mm to 7 mm (1/8" to 9/32").
    • Mounting plates are ordered separately, use one of the following mounting plates for face frame cabinets:
      • SKU 652304 (Blum's 0 mm face frame plate)
      • SKU 652305 (Blum's 3 mm face frame plate)
      • SKU 652306 (Blum's 6 mm face frame plate)
    • Possible overlay dimensions that can be achieved: 7 mm to 18 mm (9/32" to 23/32")
    • After installation the overlay can be adjusted plus or minus 2 mm so a 20 mm (or nearly 7/8") is possible with this hinge.
    • Click on the link below for more detailed information about choosing your bore distance, overlay and mounting plate.
  • Hinge features:
    • Made from nickel plated steel
    • Fits into a 35 mm (1-3/8") cup
    • Cup depth is 13 mm (1/2")
    • Center-to-center screw hole dimensions of the hinge cup are 45 mm (1-3/4").
    • Each hinge uses 2 each #6 flat head screws (not included but offered for purchase during checkout)
    • This hinge is a two part hinge (the hinge and the mounting plate).
    • Make sure to order at least two hinges and two mounting plates for each door that you are hanging.
    • Mounting plates are offered for purchase during checkout.

Accessories available for this hinge (Offered for purchase at check-out):

  • Mounting plates for frameless or face frame applications, required for installation.
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
  • Restriction clip. Limits angle of opening to 86 degrees (SKU 701113)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268001)
  • Hinge cup cap, covers hinge cup and screws, dresses up the hinge (SKU 701156)
  • Soft Close Add-on Device, eliminates slamming of the door, dampens closing action (SKU 268230)
  • Touch Latch (SKU 268038).
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)
Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts

Blum 110 Plus, Straight Arm HingeSelf ClosingDiscounts
Quantity Discounts for SKU 701150
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review