Blum, 107, 120 and 155 Degree Hinges

Blum, 107, 120 and 155 Degree Hinges

  • This section contains Blum's Clip Top Style Hinges for
  • 107 Degree Opening
  • 120 Degree Opening
  • 155 Degree Opening

Blum 107 Degree Clip Top Hinges

Blum 107 Degree Clip Top Hinges
  • Blum 107 Degree Clip Top Hinges allow door to open to 107 degrees.
  • This hinge has a restriction clip option (sold separately) which restricts the opening of the door to 86 degrees.
  • Available in 3 styles
    • Straight Arm
    • Full Crank
  • For Face Frame and Frameless Cabinets.
  • For Overlay orInset Doors.

Click here for Information & Pricing

Blum 120 Degree Clip Top Hinge, Straight-Arm Style

Blum 120 Degree Clip Top Hinge, Straight-Arm Style
  • For overlay doors on "frameless" or "face frame" cabinets.
  • This "Straight Arm" type hinge features a 120 degree opening angle.
  • Hinges fit into a 35mm (1-3/8") cup drilled in the back of the door.
  • Hinges are self-closing. Self closing means they do not require a cabinet catch to hold door against cabinet.
  • When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges on your door at the same time.
  • Use one of our "Clip Top" mounting plates with this hinge (sold separately and offered for purchase during checkout).
  • Each hinge uses 2 each #6 flat head screws (not included but offered for purchase during checkout).
  • PLEASE NOTE: European hinges are a two part hinge (the hinge and a mounting plate). Make sure to order at least two hinges and two mounting plates for each door you are hanging. Mounting plates are offered for purchase during checkout.
  • Click on the link below for installation information and mounting plate choice.

Accesories available for this hinge (Offered for purchase at check-out):

  • Mounting plates for frameless and face frame applications, required for installation.
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268001)
  • Hinge cup cap, covers hinge cup and screws, dresses up the hinge (SKU 701114)
  • Soft Close Add-on Device, eliminates slamming of the door, dampens closing action (SKU 268230)
  • Touch Latch (SKU 268038).
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)

Finishes:

  • Nickel plated
Click here for Information & Pricing

Blum 120 Degree Clip Top Hinge, Half-Cranked Style

Blum 120 Degree Clip Top Hinge, Half-Cranked Style
  • For full inset or back-to-back (twin overlay) doors on "frameless" cabinets.
  • Hinge features 120 degree opening angle.
  • Hinges fit into a 35mm (1-3/8") cup drilled in the back of the door.
  • Self-closing hinge. Self-closing means that the hinge will hold the door against the cabinet in the closed position so that it does not require a cabinet catch.
  • This is a "half-cranked" style hinge.
  • When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges on your door at the same time.
  • Use one of our "Clip Top" mounting plates with this hinge (sold separately and offered for purchase during checkout).
  • For installation information and mounting plate choices click on the link below
  • Screws for this item are not included. To order screws, order our SKU #652360. Screws are offered for purchase during checkout.

Accessories available for this hinge (Offered for purchase at check-out):

  • Mounting plates for face frame orframeless applications, required for installation.
  • #6, flat head screws, required for installation (SKU 652360)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
  • Hinge cover caps, covers adjustment screws, dresses up the hinge (SKU 268002)
  • Hinge cup cap, covers hinge cup and screws, dresses up the hinge (SKU 701114)
  • Soft Close Add-on Device, eliminates slamming of the door, dampens closing action (SKU 268233)
  • Touch Latch (SKU 268038).
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)

Finishes:

  • Nickel plated
Click here for Information & Pricing

Blum 155 Degree Straight Arm Hinge

Blum 155 Degree Straight Arm Hinge
  • This hinge is Blum's 155 degree straight arm hinge. It is used for the following:
    • a 155 degree zero protrusion hinge (click on link below to go to our page for this application)
    • a 155 degree hinge used for special applications(click on links below for more information)
      • thick door applications.
      • large overlays up to 34mm (1.34 inches).
      • mitred doors with large overlays.
      • doors which have had thin facings added.
      • with all installations of this hinge, trial applications are highly advised.
  • Hinge is a self closing hinge. Self closing action starts at 30 degrees.
  • Hinge is adjustable 3-ways after installation.
  • The hinge installs in a 35mm (1-3/8") cup drilled in the back of the door.
  • With all of the above uses of this hinge, it uses our mounting plate SKU 652296.
    • IMPORTANT: This item is not included and must be ordered separately.
    • It is offered for purchase when checking out.
  • Installs in both Face Frame Cabinets and Frameless Cabinets.
  • Uses Blum #6 screws (2 per hinge, 2 per mounting plate), not included but offered for purchase during checkout.
  • Optional Items
    • Restriction clips: optional clips are available if you need to restrict the opening angle of the hinge. These clips are offered for purchase during checkout:
      • 92 degree clip is our SKU 268774
      • 110 degree clip is our SKU 268772
    • Soft close: If you would like the door to close softly without slamming Blumotion is available for this hinge. Order our SKU 268771 (one per hinge). This item is offered for purchase during checkout.

Click here for Information & Pricing

Blum 155 Degree Hinge for 3/8 Inch Partial Inset Cabinets

Blum 155 Degree Hinge for 3/8 Inch Partial Inset Cabinets
  • Blum clip top hinge solution for 3/8" partial inset cabinets.
  • For frameless cabinets.
  • For face frame cabinets, you will need to "block out" the face frame by installing a 3" tall piece of wood behind the face frame (on the inside of the cabinet). This wood block is not included and must be made by the installer. Wood block needs to be sized so that it is flush with the edge of the face frame.
  • Hinge is a 1/2 crank 155 degree opening hinge. Cup size is 35mm. Hinge is self-closing.
  • Installation information:
    • Bore distance 11mm. The bore distance is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door.
    • Mounting plate (must be ordered separately) is our SKU 652301. It is offered for purchase during checkout.
    • Mounting plate screw holes are located 46mm from the edge of the cabinet side panel.
    • Screws: Each hinge and mounting plate uses 4 each #6 flat head wood screws (not included but offered for purchase during checkout).
  • Optional Items
    • Restriction clips: optional clipsare available if you need to restrict the opening angle of the hinge. These clips are offered for purchase during checkout:
      • 92 degree clip is our SKU 268774
      • 110 degree clipis our SKU 268772
    • Soft close: If you would like the door to close softly without slamming Blumotion is available for this hinge. Order our SKU 268771 (one per hinge). This item is offered for purchase during checkout.
  • PLEASE NOTE: European hinges are a two part hinge (hinge and mounting plate). The mounting plate (SKU 652301)is not included and must be ordered separately. Screws are not included and must be ordered separately.
Click here for Information & Pricing