accredited business BBB
Frequently Asked Questions
  • How do I estimate hinge weight capacity?

  • How much is shipping?

  • Can you match my screw hole patterns?

  • What about Installation Instructions?

  • What is a pair of hinges?

40mm European Hinges, Straight Arm Type (Face Frame Overlay)

40mm European Hinges, Straight Arm Type (Face Frame Overlay)

Product Information & Specifications

  • A 40 millimeter (approx 1-9/16") cup European hinge for thick doors. Maximum door thickness is 1-1/2".
  • Opening angle is 94 degrees, hinge is self-closing, finish is nickel plated.
  • This hinge is made for overlay doors on a "face frame" cabinet. Minimum side panel thickness is 16mm (5/8").
  • A wide variety of overlays is possible depending on the mounting plate and bore distance used.
    • See "Overlay Chart" at link below. The overlay range possible is 18mm to 33mm.
    • After installation, the overlay is slightly adjustable.
      • It can be decreased by 4.5 mm (almost 3/16")
      • It can be increased by 1.5 mm (1/16")
  • Hinges are 3-way adjustable after installation. Mounting plates can be vertically adjusted after installation. Mounting plates and hinges connect by "snapping" together.
  • PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate. You would normally order 2 hinges and 2 mounting plates per door.
  • Uses #6 flat head wood screws. Not included but offered for purchase during checkout.

Actual Plate HeightTypeSKUPriceQtyUnit
n/aStraight Arm Hinge796800$5.99
7/16"1mm Face Frame Plate796706$2.49
9/16"4mm Face Frame Plate796707$2.99
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review