Special Application European Style Hinges

Special Application European Style Hinges

  • European hinges for special cabinets
    • 45 degree angle cabinets
    • Blind corner inset cabinets
    • Blind corner overlay cabinets
    • 3/8" partial inset cabinets
    • Mitre edge doors
    • Zero Protrusion Hinge
    • Flap Hinge
    • Profile Doors

Blum Special Application Hinge, 155 Degree

Blum Special Application Hinge, 155 Degree
  • This hinge is Blum's 155 degree straight arm hinge. It is used for the following:
    • a 155 degree zero protrusion hinge (click on link below to go to our page for this application)
    • a 155 degree hinge used for special applications(click on links below for more information)
      • thick door applications.
      • large overlays up to 34mm (1.34 inches).
      • mitred doors with large overlays.
      • doors which have had thin facings added.
      • with all installations of this hinge, trial applications are highly advised.
  • Hinge is a self closing hinge. Self closing action starts at 30 degrees.
  • Hinge is adjustable 3-ways after installation.
  • The hinge installs in a 35mm (1-3/8") cup drilled in the back of the door.
  • With all of the above uses of this hinge, it uses our mounting plate SKU 652296.
    • IMPORTANT: This item is not included and must be ordered separately.
    • It is offered for purchase when checking out.
  • Installs in both Face Frame Cabinets and Frameless Cabinets.
  • Uses Blum #6 screws (2 per hinge, 2 per mounting plate), not included but offered for purchase during checkout.
  • Optional Items
    • Restriction clips: optional clips are available if you need to restrict the opening angle of the hinge. These clips are offered for purchase during checkout:
      • 92 degree clip is our SKU 268774
      • 110 degree clip is our SKU 268772
    • Soft close: If you would like the door to close softly without slamming Blumotion is available for this hinge. Order our SKU 268771 (one per hinge). This item is offered for purchase during checkout.

Click here for Information & Pricing

Hettich Markant Flap Hinge

Hettich Markant Flap Hinge
  • Hettich Flap hinge, Markant 7.1 for overlay installations.
  • For installation of "fold down" flaps.
  • Fold Down Flaps are used on desks, drawers, etc. The hinge allows the front flap to fold down creating a horizontal work surface.
  • Complete unit is made up of two hinges (a right hand and a left hand hinge) and two mounting plates. Flap can be removed from desk after installation by loosening the screw on the mounting plate.
  • After installation both the depth and the height of the hinge may be adjusted plus or minus 2 mm.
  • Made from steel base material and nickel plated.
  • The hinges fit into a 35mm (1-3/8") cup drilled into the surface of the flap.
  • Hinge in the photo shows the "Left Hand" hinge (SKU 306200)
  • PLEASE NOTE:To hinge a flap you need to order 4 items:
    • one Right Hand Hinge (SKU 306202)
    • one Left Hand Hinge (SKU 306200) and
    • two mounting plates (SKU 306205)
  • Fasteners
    • Each hinge requires 2 each #6 flat head wood screws, not included but offered for purchase during checkout. Order 2 each SKU 652360.
    • Each mounting plate comes with 2 system screws. System screws fit into 5 mm holes that are usually pre-drilled in the cabinet and spaced 32 mm apart. If you are not using the system screws you should order #10 pan head screws (2 for each mounting plate).
  • PLEASE NOTE: Most of our products are not packaged for retail sale and as such do not contain instructions. We recommend that, if you are placing an order for this product, you print out the installation information found at the links below.
Click here for Information & Pricing

Inset Blind Corner Hinge for Tight Spaces

Inset Blind Corner Hinge for Tight Spaces
  • Blind corner hinge for inset doors
  • A Blind corner cabinet (Inset door)
    • A typical inset door is hinged to a panel that is positioned at "right angles" to the door
    • A Blind Corner cabinet has a door that is hinged to a panel that is in the same "plane" as the door
    • The door is "flush" with the cabinet panel
    • Click on the link below to see a diagram of this type of installation
  • This hinge is unique in that it is much shorter than a typical Blind Corner Inset Door hinge
    • It is useful when you have a tight space situation.
    • This hinge only needs a minimum of 32 mm (1-1/4") of panel space for the end of the hinge and the mounting plate.
  • Hinge opening angle is 94 degrees.
  • Installation information
    • Hinge cup size is 35mm (1-3/8")
    • Minimum hinge cup depth is 11 mm (7/16")
    • Bore distance range is from 3 mm to 8 mm
    • Hinge is adjustable after installation
  • This product is sold as a set, a set includes the following:
    • one hinge
    • one mounting plate
    • 2 dowel screws for the hinge
    • 2 plastic dowels for the hinge
    • 2 #6 wood screws for the mounting plate
  • You would typically order 2 sets to hang one door
Click here for Information & Pricing

Blum 155 Degree Hinge for 3/8 Inch Partial Inset Cabinets

Blum 155 Degree Hinge for 3/8 Inch Partial Inset Cabinets
  • Blum clip top hinge solution for 3/8" partial inset cabinets.
  • For frameless cabinets.
  • For face frame cabinets, you will need to "block out" the face frame by installing a 3" tall piece of wood behind the face frame (on the inside of the cabinet). This wood block is not included and must be made by the installer. Wood block needs to be sized so that it is flush with the edge of the face frame.
  • Hinge is a 1/2 crank 155 degree opening hinge. Cup size is 35mm. Hinge is self-closing.
  • Installation information:
    • Bore distance 11mm. The bore distance is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door.
    • Mounting plate (must be ordered separately) is our SKU 652301. It is offered for purchase during checkout.
    • Mounting plate screw holes are located 46mm from the edge of the cabinet side panel.
    • Screws: Each hinge and mounting plate uses 4 each #6 flat head wood screws (not included but offered for purchase during checkout).
  • Optional Items
    • Restriction clips: optional clips are available if you need to restrict the opening angle of the hinge. These clips are offered for purchase during checkout:
      • 92 degree clip is our SKU 268774
      • 110 degree clip is our SKU 268772
    • Soft close: If you would like the door to close softly without slamming Blumotion is available for this hinge. Order our SKU 268771 (one per hinge). This item is offered for purchase during checkout.
  • PLEASE NOTE: European hinges are a two part hinge (hinge and mounting plate). The mounting plate (SKU 652301)is not included and must be ordered separately. Screws are not included and must be ordered separately.
Click here for Information & Pricing

European Special Profile Hinge

European Special Profile Hinge
  • European hinge designed by Salice for doors with special profiles or for doors with special drilling requirements.
  • Please see links below (Special Profiles Page 1 and Special Profiles Page 2) for examples of doors that can be used with this hinge.
  • Maximum opening angle is 110 degrees.
  • European hinges are a two part hinge. Please order two hinges and two mounting plates for an average height door.
  • See links below (Special Profiles Page 1 and Special Profiles Page 2) for the SKU number of the mounting plate needed.
  • Hinge fits into a 35mm (1-3/8") hole drilled in the back of the door.
  • Uses #6 screws (not included). Order 2 screws for each hinge ordered and 2 screws for each mounting plate ordered. Screws are offered for purchase during checkout.
  • Made from steel and nickel plated.
Click here for Information & Pricing

Blum Zero Protrusion Hinge

Blum Zero Protrusion Hinge

The Zero Protrusion Hinge is specially designed for cabinets that have roll-outs such as drawers or storage bins. The hinge allows the door to open so that when it reaches 90 degress of opening the roll-out can be pulled out without interfering with the door.

Click here for Information & Pricing

Blum Blind Corner Hinges

Blum Blind Corner Hinges

European style cabinet hinges for "Blind Corners". Available in two types; Inset or Overlay.

Click here for Information & Pricing

Blum 45 Degree Hinge

Blum 45 Degree Hinge
Hinge for 45 degree diagonal cabinets. For Overlay or Inside Corner Installation.
Click here for Information & Pricing

Mitre Hinge for Doors and Flaps

Mitre Hinge for Doors and Flaps
  • European style hinge for Doors and Drop Flaps with a mitred edge (45 degree mitre).
  • Hinge fits into 35mm (1-3/8") cups drilled in the back of the doors. Click on link below for drilling diagram.
  • Available in two models:
    • SKU 796952 is a 90 degree opening model for doors and drop flaps
    • SKU 796948 is a 135 degree opening model for doors
  • Adjustable after installation:
    • 3 mm in height
    • 1.5 mm in depth
    • 1.5 mm in width
  • Construction:
    • The hinge cup is made from zinc die-cast metal
    • The hinge arms are made from steel
    • The entire hinge is zinc chromate plated
  • Each hinge uses 4 each, #6 flat head screws (our SKU 652360). Screws are not included but are offered for purchase during checkout.
  • Made for the following Door, Drop Flap and Side Panel Thicknesses
    • Door or Drop Flap thickness range of 16 to 22 mm (5/8" to 7/8")
    • Side panel thickness range of 16 to 22 mm (5/8" to 7/8")
  • This hinge is sold by the each. You will normally order 2 hinges for each door or flap.
  • Click on links below for dimension, installation and adjustment information.

PLEASE NOTE: A Drop Flap normally needs a lid stay to help support the flap in the down position. This hinge is not meant to act as the only means of support for a Drop Flap.

Click here for Information & Pricing