accredited business BBB Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts
Frequently Asked Questions
  • What is a pair of hinges?

  • What about Installation Instructions?

  • Can you match my screw hole patterns?

  • How much is shipping?

  • How do I estimate hinge weight capacity?

Grass 160 Degree Half Cranked Hinge, Soft Closing

Grass 160 Degree Half Cranked Hinge, Soft Closing

Product Information & Specifications

  • 160 Degree opening, Half Cranked hinge for cabinets that have doors with smaller overlay dimensions.
    • For Face Frame cabinets the overlay range is 5 to 17 mm (about 3/16" to about just over 5/8")
    • For Frameless cabinets the overlay range is 3.5 mm to 17.5 mm (about 1/8" to just over 5/8")
  • This hinge can be used for "new construction" or to replace worn out or obsolete Grass half cranked hinges that open approximately 160 degrees on overlay doors.
  • This hinge is also a "Zero Protrusion" hinge. It can be used for cabinets which have pullouts (i.e. drawers). When the cabinet door is open to 90 degrees the inside corner of the door is clear of the opening, allowing a drawer to pullout. For this application, you must use the 0 mm mounting plate (our SKU 701380, frameless mounting plate).
  • This hinge is a soft closing hinge, the soft close feature eliminates the slamming door sound that you get with typical self-closing European hinges. This hinge is part of the Grass Tiomos hinge system.
  • This hinge is available in two screw hole spacings for the hinge cup:
    • 42 mm (1-5/8"). Our SKU 701369.
    • 45 mm (1-3/4"). Our SKU 701354.
    • Screw holes are measured from center to center (center of one hole to the center of the other hole)
    • Click on the link below to see a diagram showing the screw hole spacing.
  • Specs
    • Hinge cup size is 35 mm (1-3/8"). Cup depth is 10 mm (just slightly under 7/16").
    • Works for bore distances of from 3 mm to 10 mm.
    • Works for overlays of up to about 17 mm. This hinge is for smaller overlays. For larger overlays see our 160 degree Straight Arm Grass Hinges.
    • Works for door thicknesses up to 32 mm (1-1/4").
    • An optional restriction clip (reduces opening angle to 120 degrees) is available (our SKU 701355). Clip is offered for purchase during checkout.
    • Allows door to open to 160 degrees
  • Works on the following cabinet types
    • Overlay door on a Face Frame cabinet
    • Overlay door on a Frameless cabinet
  • Mounting plates are sold separately
    • Make sure to order one mounting plate for each hinge that you order
    • Use a Face Frame mounting plate for face frame cabinets
    • Use a Frameless mounting plate for frameless cabinets
    • Click on the link below for more information about which size mounting plate to use for your cabinet and door
  • Soft close feature
    • Grass hinges are unique in that they have a lever at the back of the hinge so you can adjust the soft close speed by choosing one of three different closing pressure settings.
    • Also unique for these hinges is that the soft close mechanism is fully integrated into the hinge arm rather than the hinge cup.
    • Click on the link below for more information on how to adjust the soft close
  • Adjustability
    • This hinge features 4 different adjustments
      • Soft close pressure
      • Depth adjustment (+3 mm and -2 mm)
      • Side adjustment (overlay on this hinge) +2 mm and -2 mm
      • Height adjustment (+2 mm and -2 mm)
    • Click on link below for information on how to adjust
  • Fasteners
    • Included with each hinge are plastic dowels and dowel screws for the hinge cup
    • Dowels are typically used on manufactured wood or MDF doors because they hold better than wood screws
    • If you have a solid wood door, discard the plastic dowels and either use the (blunt and slightly shorter) dowel screws that come with the hinge or purchase #6 flat head wood screws (2 each per hinge, our SKU 365360). These screws are offered for purchase during checkout.
Quantity Pricing Available Place your cursor over the green icon below for special quantity discounts

Hinge Cup Screw HolesTypeQuantity
Pricing
SKUPriceQtyUnit
42 mmHalf Cranked 160 DegreesDiscounts
Quantity Discounts for SKU 701369
1+6+12+24+36+
$13.97$12.85$12.29$11.87$11.18
701369$13.97
Each
45 mmHalf Cranked 160 DegreesDiscounts
Quantity Discounts for SKU 701354
1+6+12+24+36+
$13.97$12.85$12.29$11.87$11.18
701354$13.97
Each
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review