accredited business BBB
Frequently Asked Questions
  • What about Installation Instructions?

  • How much is shipping?

  • How do I estimate hinge weight capacity?

  • What is a pair of hinges?

  • Can you match my screw hole patterns?

110 Degree Half Cranked European Hinge, 48 mm Screw Hole Spacing

110 Degree Half Cranked European Hinge, 48 mm Screw Hole Spacing

Product Information & Specifications

  • 110 Degree Half Cranked European Hinge, 48 mm (1-7/8") Screw Hole Spacing
  • Use this hinge for:
    • "Back-to-Back" doors, these are doors on a frameless cabinet which are hinged to the same cabinet side panel. The doors open in opposite directions and each door covers a separate cabinet opening. These are typically smaller overlays. Also known as "Twin Overlay".
    • Doors with a smaller overlay (either face frame or frameless cabinets) than what can be achieved with a Straight Arm hinge.
  • Made from steel and nickel plated
  • Click on the link below to see a diagram showing the screw hole spacing.
  • Specs
    • Hinge cup size is 35 mm (1-3/8"). Cup depth is 7/16".
    • Works for bore distances of from 3 mm to 7 mm
    • Works for the following overlay dimensions from 1 mm to 13 mm (approximately 1/16" to 1/2")
    • Click on links below for more information on choosing the correct mounting plate for your door overlay dimension
    • Works for door thicknesses 16 mm to 22 mm (5/8" to 7/8")
    • Hinge is self-closing, no cabinet catch is required
    • An optional soft close add-on device is available for this hinge (our SKU 701805). It is offered for purchase during checkout.
    • Allows door to open to 110 degrees
  • Works on the following cabinet types
    • Overlay door on a Face Frame cabinet
    • Overlay door on a Frameless cabinet
    • Overlay "Back-to-Back" doors on a Frameless cabinet (click on link below for more information on this type of cabinet)
  • Mounting plates are sold separately
    • Make sure to order one mounting plate for each hinge that you order
    • Use a Face Frame mounting plate for face frame cabinets
    • Use a Frameless mounting plate for frameless cabinets
    • Click on the link below for more information about which size mounting plate to use for your cabinet and door
  • Adjustability
    • This hinge features 3 different adjustments
      • Depth adjustment (+3 mm and -1 mm)
      • Side adjustment (overlay on this hinge) +1 mm and -3 mm (overlay can be increased by 1 mm or decreased by 3 mm).
      • Height adjustment (+2 mm and -2 mm)
    • Click on link below for information on how to adjust
  • Fasteners
    • Included with each hinge are plastic dowels and dowel screws for the hinge cup
    • Dowels are typically used on manufactured wood or MDF doors because they hold better than wood screws
    • If you have a solid wood door, discard the plastic dowels and either use the (blunt and slightly shorter) dowel screws that come with the hinge or purchase #6 flat head wood screws (2 each per hinge, our SKU 652360). These screws are offered for purchase during checkout.

48 mm Screw Hole SpacingHalf Cranked Hinge701803$3.99
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review