Compact European Face Frame Hinges (one piece)

Compact European Face Frame Hinges (one piece)

  • One Piece Compact European hinges are compact European hinges used on face frame cabinets.
  • They are one piece hinges. This means that the mounting plate is not removable from the hinge.
  • The are available in a limited number of door overlay sizes.

Blum "Compact 38N" Hinges, Small Overlay

Blum
  • Blum Compact 38N one piece steel hinge. Mounting plate and hinge are combined in one unit.
  • For face frame cabinets.
  • Opening angle is 105 degrees.
  • Hinge installs in a 35mm (1-3/8") diameter cup drilled in the back of the door.
  • This hinge features a shallow cup depth (7/16"). This is useful for doors with a deep profile cut on the outside edge of the door.
  • Bore distanceis 1/8". The bore distance is the distance between the edge of the door and the edge of the 35mm cup drilled in the back of the door. This dimension is a standard dimension for all compact European hinges.
  • Hinge is self-closing.
  • Available in 4 different overlays. If you are replacing hinges, your present overlay will be stamped on the old hinge.
  • If you need to determine the overlay dimension of your door, click on the link below for measurement instructions.
  • The hinge side comes with screws and press-in dowels. If your installation does not use "press in" dowels you can remove the dowels and use the wood screws provided.
  • The mounting plate side does not come with screws. Order one #10 pan head screw for each hinge ordered. Screws are offered for purchase during checkout.
  • The hinge is adjustable after installation. Plus or minus 1/8" in height. Plus or minus 1/16" side to side. Plus 3/32" and minus 1/32" depth.
  • For 3/4" face frame thicknesses.

Accesories available for this hinge (Offered for purchase at check-out):

  • #10 Pan head screw, required for installation (SKU 135418).
  • Soft Close device (SKU 268232).
  • Touch Latch (SKU 268038).
  • 35mm Forstner Bit, for new installations (SKU 204000).
  • Ecodrill installation jig, for new installations (SKU 701000).
  • Decorative hinge arm cover cap (SKU 268778)

Finishes:

  • Nickel plated
Click here for Information & Pricing

Blum "Compact 39C" Hinges, Large Overlay

Blum
  • Blum Compact 39C one piece steel hinge. Mounting plate and hinge are combined in one unit.
  • For face frame cabinets.
  • Opening angle is 110 degrees.
  • Hinge installs in a 35mm (1-3/8")diameter cup drilled in the back of the door. Cup depth is 1/2".
  • Bore distance is 1/8". The bore distance is the distance between the edge of the door and the edge of the 35mm cup drilled in the back of the door. This dimension is a standard dimension for all compact European hinges.
  • Hinge is self-closing.
  • Available in 4 different overlays. If you are replacing hinges, your present overlay should be stamped on the old hinge.
  • If you need to determine the overlay dimension of your door, click on the link below for measurement instructions.
  • The hinge side comes with screws and press-in dowels. If your installation does not use "press in" dowels you can remove the dowels and use the wood screws provided.
  • The mounting plate side does not come with screws. Order one #10 pan head screw for each hinge ordered. Screws are offered for purchase during checkout.
  • The hinge is adjustable after installation. Plus or minus 1/8" in height. Plus or minus 1/16" side to side. Plus 3/32" and minus 1/32" depth.
  • For 3/4" face frame thicknesses.

Accesories available for this hinge (Offered for purchase at check-out):

  • #10 Pan head screw, required for installation (SKU 135418).
  • Soft Close device (SKU 268232).
  • Touch Latch (SKU 268038).
  • 35mm Forstner Bit, for new installations (SKU 204000).
  • Ecodrill installation jig, for new installations (SKU 701000).
  • Decorative hinge arm cover cap (SKU 268791)

Finish:

  • Nickel plated
Click here for Information & Pricing

Grass One Piece Compact Hinges, Small Overlay

Grass One Piece Compact Hinges, Small Overlay
  • One piece compact European hinges for face frame cabinets
  • Made by the Grass Company, made in the USA
  • An 86 degree clip that restricts the opening of the door to 86 degrees is available and is offered for purchase during checkout (our SKU 701189)
  • Installation information
    • Installs in a 35 mm (1-3/8") cup drilled in the back of the door
    • Uses a 2.5 mm (3/32") bore distance
    • Uses a 11 mm (7/16") cup depth
    • Features a 108 degree opening angle
    • Works on door thicknesses ranging from 13 mm (1/2") to 19 mm (3/4")
    • All hinges feature front and back tabs for help in installing on the cabinet face frame (except for SKU 701186 which only has the front tabs)
    • Screw hole spacing on hinge cup (center of one hole to center of the other hole):
      • SKUs 701180, 701182, 701184 have a 45 mm (1-3/4") screw hole spacing
      • SKUs 701187, 701188, 701186 have a 42 mm (approx 1-5/8") screw hole spacing
      • Click on link below for a diagram showing the exact screw hole spacing
    • These hinges accommodate three different overlay dimensions
      • 7/16" overlay (SKUs 701182 and 701187)
      • 1/2" overlay (SKUs 701182 and 701187)
      • 9/16" overlay (SKUs 701184 and 701188)
    • This self-closing hinge is made from steel and nickel plated
    • Click on links below for information on hinge dimensions, minimum reveal and hinge cup screw hole spacing.
  • Screws
    • The screw that holds the mounting plate to the face frame is NOT included but is offered for purchase during checkout
    • Recommended screw is a 3/4" x #10 pan head screw (our SKU 135418)
    • The hinge cup uses 2 each hinge cup screws
      • Each hinge comes with two plastic dowels and two dowel screws
      • Dowels and dowel screws are recommended for doors that are made from pressed or manufactured wood
      • Dowel screws are regular wood screws that are a slightly shortened and blunt version of a wood screw.
      • For solid wood doors, #6 wood screws (no dowels) are recommended.
      • For solid wood doors, discard the plastic dowels and either use the dowel screws or purchase regular bronze #6 flat head wood screws (2 each per hinge, our SKU 652360). These screws are offered for purchase during checkout.
Click here for Information & Pricing

Generic Compact European Hinge, Small Overlay

Generic Compact European Hinge, Small Overlay
  • Generic European style compact one piece hinge. Mounting plate and hinge are combined in one unit.
  • Opening angle is 105 degrees. Hinge is self closing.
  • For face frame cabinets with overlay doors. Three overlay dimensions are offered: 7/16", 1/2" and 3/4".
  • Hinge is made for cabinets with a 3/4" thick face frame.
  • Cup diameter is 1-3/8". Cup depth is 7/16". Bore distance is 1/8". Hinges feature 3-way adjustability.
  • The hinge side comes with screws and press-in dowels. Dowels are typically used in MDF or particle board material. If mounting in solid wood, remove the dowels and use the included wood screws.
  • Screws are not included for the face frame attachment. Each hinge uses one #7 screw to attach to the face frame. Screws are offered for purchase during checkout.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

Generic Compact European Hinge, Large Overlay

Generic Compact European Hinge, Large  Overlay
  • Generic European style compact one piece hinge. Mounting plate and hinge are combined in one unit.
  • Opening angle is 105 degrees. Hinge is self closing.
  • For face frame cabinets which have overlay doors. Three different overlay hinges are offered; 1-1/4" overlay, 1-3/8" overlay and 1-1/2" overlay.
  • Hinge is made for cabinets with a 3/4" thick face frame.
  • Cup diameter is 1-3/8". Cup depth is 7/16". Bore distance is 1/8". Hinges feature 3-way adjustability.
  • The hinge side comes with screws and press-in dowels. Dowels are typically used in MDF or particle board material. If mounting in solid wood, remove the dowels and use the included wood screws.
  • Screws are not included for the face frame attachment. Each hinge uses one #7 screw to attach to the face frame. Screws are offered for purchase during checkout.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

Blum One Piece Compact Hinges with Built-in Blumotion

Blum One Piece Compact Hinges with Built-in Blumotion

  • Compact One Piece European hinge with built-in Blumotion (one piece means that the mounting plate and the hinge are combined into one unit).
  • Blumotion is Blum's soft closing mechanism, which allows the cabinet door to close softly without banging.
  • This hinge may be used to replace any compact one piece European hinge that is installed with the following:
    • the same overlay dimension
    • a bore distance of 1/8" (the bore distance is the distance between the edge of the door and the edge of the cup drilled in the back of the door)
    • a cup diameter of 35mm (1-3/8")
    • a matching cup depth, as shown below
  • This hinge features:
    • an overload safety feature (protects the soft close mechanism if the door is slammed)
    • deactivation switch (for small or light doors, one of the hinges may be deactivated for less dampening action)
  • Available in two cup depths, shallow and standard. The shallow cup depth is useful for doors with a deep profile cut on the outside edge of the door.
  • Hinge is 6-way adjustable after installation.
  • Hinge comes with dowels and screws for the door side of the hinge. Dowels may be discarded if not needed.
  • Screws for the cabinet side are not included but are offered for purchase during check out. Order one #10 pan head screw for each hinge ordered.

PLEASE NOTE:

  • When changing hinges on your door, you should change all of the hinges. Mixing different types or brands of hinges will cause door binding problems.
  • The mounting plate side of the hinge may differ slightly from what is shown in the image depending on the overlay of the hinge.

Accesories available for this hinge (Offered for purchase at check-out):

    • #10 Pan head screw, required for installation (SKU 135418).
    • Restriction Clip, limits angle of opening to 86 degrees (SKU 268765).
    • Cover Caps, covers the screws on the mounting plate.
      • Use SKU 268795 for the small overlay hinges (5/16" to 3/4" overlay)
      • Use SKU 268791 for larger overlay hinges (1-1/4" to 1-9/16" overlay)
    • Touch Latch (SKU 268038).
    • Spacer, for thin profile or beveled doors (SKU 268790)
    • 35mm Forstner Bit, for new installations (SKU 204000)
    • Ecodrill, installation jig, for new installations (SKU 701000)
Click here for Information & Pricing

Blum Face Mount Compact Hinge with Blumotion

Blum Face Mount Compact Hinge with Blumotion
  • Compact One Piece European hinge with built-in Blumotion.
  • This hinge is special in that the mounting plate side of the hinge mounts on the face of the cabinet face frame instead of the edge of the cabinet face frame. (See the support information below for an installation image).
  • This hinge works for doors which have an overlay of 1-3/8" or greater.
  • Blumotion is Blum's soft-closing mechanism which allows the cabinet door to close softly without banging.
  • This hinge features:
    • an overload safety feature (protects the soft close mechanism if the door is slammed).
    • deactivation switch (for small or light doors, one of the hinge may be deactivated for less dampening action)
  • When changing hinges on your cabinet door, it is necessary to change out all of the hinges so that you do not have different types of hinges on the same door. Mixing non-Blumotion hinges on your door will cause the door to bind as they have different pivot points and articulation.
  • The cup depth required for this hinge is a minimum of 7/16".
  • Hinge is 6-way adjustable after installation.
  • Hinge comes with dowels and screws for the door side of the hinge. Dowels may be discarded if not needed.
  • Optional Items:
    • Screws for the cabinet side are not included but are offered for purchase during checkout.
    • Order 2 each of our SKU 652360 for each hinge ordered.
    • A Restriction Clip is available for this item. The restriction clip (our SKU 268765) stops the door from opening wider than 86 degrees. This is valuable if the fully open door hits another cabinet, glass door, TV screen, etc. The restriction clip is offered for purchase during checkout.
    • Spacer Plate: The spacer plate (our SKU 268790) installs between the hinge and the hinge cup. It is 1/16" thick. It is useful for thin, profile or bevel doors. It is offered for purchase during checkout.
Click here for Information & Pricing

Compact European Hinge, Dark Bronze, Soft Closing, 1/2" Overlay

Compact European Hinge, Dark Bronze, Soft Closing, 1/2
  • Compact one piece European hinge which features:
    • Dark Bronze finish
    • Built-in soft close
    • Opens to 106 degrees
    • Three way adjustable after installation
    • A switch which will deactivate the soft close feature
  • Designed for 1/2" overlay face frame cabinets
  • Designed for a face frame thickness of 3/4".
  • Fasteners
    • included are plastic dowels and matching screws for the door side of the hinge. Dowels may be discarded if not needed.
    • Not included is the screw for attaching the hinge to the face frame. Order our SKU 778167, one per hinge. This screw is offered for purchase during checkout.
    • Please note that the two adjustment screws on this hinge are chrome and not the dark bronze finish.
  • Dimensions:
    • The hinge screw hole center-to-center dimension is 1-3/4" (45mm)
    • The hinge fits into a 1-3/8" (35mm) cup drilled in the back of the door
    • The bore distance used for this hinge is 1/8" (3 mm)
    • The cup depth of the 1-3/8" hole needs to be 7/16" (11 mm)
Click here for Information & Pricing

Compact European Hinge, Dark Bronze, Soft Closing, 1-1/4" Overlay

Compact European Hinge, Dark Bronze, Soft Closing, 1-1/4
  • Compact one piece European hinge which features:
    • Dark Bronze finish
    • Built-in soft close
    • Opens to 106 degrees
    • Three way adjustable after installation
    • A switch which will deactivate the soft close feature
  • Designed for 1-1/4" overlay face frame cabinets
  • Designed for a face frame thickness of 3/4".
  • Fasteners
    • included are plastic dowels and matching screws for the door side of the hinge. Dowels may be discarded if not needed.
    • Not included is the screw for attaching the hinge to the face frame. Order our SKU 778167, one per hinge. This screw is offered for purchase during checkout.
    • Please note that the two adjustment screws on this hinge are chrome and not the dark bronze finish.
  • Dimensions:
    • The hinge screw hole center-to-center dimension is 1-3/4" (45mm)
    • The hinge fits into a 1-3/8" (35mm) cup drilled in the back of the door
    • The bore distance used for this hinge is 1/8" (3 mm)
    • The cup depth of the 1-3/8" hole needs to be 7/16" (11 mm)
Click here for Information & Pricing

European Compact Hinges, Face Frame Type, 110 Degree

European Compact Hinges, Face Frame Type, 110 Degree
  • Compact European style hinge for face frame cabinets.
  • The hinge and mounting plate on these hinges are permanently connected.
  • Installs in a 35mm (1-3/8") hole drilled in the back of the cabinet door. The mounting plate installs on the edge of the face frame.
  • Available in two overlays; 1/2" and 3/4". Use a 1/8" Bore Distance (distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door).
  • Hinge is 6-way Cam-adjustable.
  • This hinge uses the Blum 1-3/4" screw hole pattern. Click on link below to view pattern.
  • 2 screws and 2 dowels are provided for the hinge side.
  • Screws are not included for the mounting plate (Uses #7 pan head screws, offered for purchase during checkout).

Finishes:

  • Nickel Plated
Click here for Information & Pricing

European Compact Hinge, Face Frame Type, 125 Degree

European Compact Hinge, Face Frame Type, 125 Degree
  • Compact European style hinge for face frame cabinets.
  • The hinge and mounting plate on these hinges are permanently connected.
  • Hinge installs in a 35mm (1-3/8") diameter hole drilled in the back of the cabinet door. The mounting plate installs on the edge of the face frame.
  • Made for doors with a 1/2" overlay.
  • Hinge opens to 125 degrees.
  • Uses an 1/8" bore distance. The bore distance is the distance from the edge of the door to the edge of the 35mm hole drilled in the back of the door. This is a standard measurement for European Compact Hinges.
  • Features height adjustment, vertical adjustment and horizontal adjustment using screw or cam adjusters.
  • 2 screws and 2 dowels are provided for the hinge side.
  • Screws are not included for the mounting plate. Uses #6 pan head metal screws, stainless steel is the best match for the finish. Screws are offered for purchase during checkout.
Click here for Information & Pricing

One Piece Face Frame Hinge, Minimal Gap

One Piece Face Frame Hinge, Minimal Gap
  • One piece compact European hinge
  • For face frame cabinets with overlay doors
  • Accomodates overlays from 26 mm to 29 mm (1-1/32" to 1-1/8")
  • Shallow cup depth of 10 mm
  • Unlike other compact face frame hinges, this hinge features minimal gaps between the back of the door and the front of the cabinet face frame. Gap dimension is approximately 1/16".
  • 130 degree opening angle
  • Made for door thicknesses from 5/8" to 3/4".
  • Made for face frame thickness of 3/4".
  • This hinge requires a 6 mm (1/4") bore distance. The bore distance is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door.
  • Hinge uses a 48 mm center-to-center screw hole distance for the hinge cup screws.
  • Made from zinc die cast material and nickel plated
  • Screws are not included but are offered for purchase during checkout.
    • Uses 2 each #6 flat head screws for the hinge cup (recommended screw is SKU 135114)
    • Uses 2 each #8 flat head screws for the mounting plate (recommended screw is SKU 135130)
  • Click on links below for:
    • Dimensional diagram
    • Minimum reveal chart
    • Adjustment information
Click here for Information & Pricing

Cover Caps for Blum Self-Closing Compact Hinges

Cover Caps for Blum Self-Closing Compact Hinges
  • Cover caps dress up your Blum Compact European Hinge
  • Cover cap easily snaps on to the mounting plate side of the hinge.
  • There are two models of these cover caps:

    • The "B" Model (SKU 268795) works on the following smaller overlay (3/8" to 3/4") hinges:
      • SKU 268200
      • SKU 268205
      • SKU 268207
      • SKU 268209

    • The "C" Model (SKU 268791) works on the following larger overlay (1" to 1-1/2") hinges:
      • SKU 268750
      • SKU 268751
      • SKU 268752
      • SKU 268753
      • SKU 268754
  • PLEASE NOTE: Images above show hinges with cover caps installed. Hinges must be purchased separately and are not included with purchase of cover cap.
  • Made from steel and are nickel plated.
  • These caps also work for Blum compact hinges with Blumotion. See link below for more information.
Click here for Information & Pricing