Aximat Hinges

Aximat Hinges

  • Aximat hinges are available in two types;
    • one type is for wood doors;
    • another type is for glass doors.
  • Aximate hinges are available in:
    • Full Overlay
    • Half Overlay
    • Inset

Old Style Aximat Hinge, 270 Degree, Full Overlay

Old Style Aximat Hinge, 270 Degree, Full Overlay
  • Aximat hinges are for 270 degree opening doors.
  • Aximat hinge is for cabinets with 3/4" (19mm)thick door and 3/4" (19mm) thick side panel.
  • Installs in a 35mm cup drilled in the back of the door.
  • Door overlay will be 15mm (19/32").
  • Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed positon.
  • Each hinge uses two types of screws. Three each #5 or #6 flat head screws and two "System screws". The screw holes for the "System screws" are located under the black plastic cover shown in the photo. Screws are not included but offered for purchase during checkout.
  • PLEASE NOTE: This Aximat hinge has been discontinued by the manufacturer. We have left this on the website for reference. The replacement for this hinge is our "New Style Aximat Hinge, 270 Degree, Full Overlay".

Finishes:

  • Nickel
  • Black
Click here for Information & Pricing

New Style Aximat Hinge, 270 Degree, Full Overlay

New Style Aximat Hinge, 270 Degree, Full Overlay
  • This is the "New Style Aximat Hinge for Full Overlay Doors". It replaces the "Old Style Aximat Hinge" which is no longer available.
  • European style Aximat hinge for 270 degree opening doors.
  • For cabinets with 3/4" (19mm)thick door and 3/4" (19mm) thick side panel.
  • Installs in a 35mm cup drilled in the back of the door.
  • Door overlay will be 15mm (19/32"), full overlay.
  • Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed positon.
  • PLEASE NOTE; a single hinge is made up of two separate parts which snap together to become the hinge that you see in the photo to the left. When ordering make sure to order one "cup side" (SKU 796616) and one "arm side" (SKU 796618) for each hinge you need.
  • PLEASE NOTE: Each "arm side" comes with two screws and two plastic dowels which are sized for a 5mm (3/16") hole. The "cup side" of the hinge does not come with screws. Each "cup side" uses 2 each #6 flat head screws which are offered for purchase during checkout.

Finishes:

  • Nickel
  • Black
Click here for Information & Pricing

Aximat Hinge, 240 Degree, Half Overlay

Aximat Hinge, 240 Degree, Half Overlay
  • This is the "New Style Aximat Hinge for Half Overlay Doors".
  • European style Aximat hinge for 240 degree opening doors.
  • For cabinets with 3/4" (19mm) thick door and 3/4" (19mm) thick side panel.
  • Installs in a 35mm cup drilled in the back of the door.
  • Door overlay will be 12.5mm (1/2"),half overlay.
  • Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed positon.
  • PLEASE NOTE; a single hinge is made up of two separate parts which snap together to become the hinge that you see in the photo to the left. When ordering make sure to order one "cup side" (SKU 796616) and one "arm side" (SKU 796617) for each hinge you need.
  • PLEASE NOTE: Each "arm side" comes with two screws and two plastic dowels which are sized for a 5mm (3/16") hole. The "cup side" of the hinge does not come with screws. Each "cup side" uses 2 each #6 flat head screws which are offered for purchase during checkout. Please note that black screws are not available.

Finishes:

  • Nickel
Click here for Information & Pricing

Aximat Hinges for Inset Doors

Aximat Hinges for Inset Doors
  • Aximat hinge for inset type doors.
  • Allows door to open 180 degrees.
  • For cabinets with a 3/4" (19 mm) thick door and a 3/4" (19 mm) thick side panel.
  • Installs in a 35mm cup drilled in the back of the door. Click on link below for exact boring dimensions and location.
  • Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed position. No additional cabinet catch is required.
  • Made from die cast material, nickel plated. There is a small nylon part that comprises the snap catch.
  • PLEASE NOTE: this hinge is made up of two parts (the cup side, our SKU 796622 and the arm side, our SKU 796620). When ordering make sure to order one cup side and one arm side for each complete hinge that you need.
  • To hang a door, you would normally order at least two complete hinges (2 each SKU 796622 and 2 each 796620). How many hinges are needed is determined by the height of the door. More information is provided at the link below.
  • PLEASE NOTE: The only screw that is included with this product is the attachment screw that holds the two hinge halves together. You will need to orderthe following screws for eachcomplete hinge that is ordered:
    • Two each Aximat system screws (our SKU 796610)
    • Three each #6 Flat Head Wood Screws (our SKU 652360)
  • The above screws are offered for purchase during checkout.
Click here for Information & Pricing