Window Hardware & Hinges, Stainless Steel

Window Hardware & Hinges, Stainless Steel

This section contains stainless steel window hinges and hardware.

Casement Hinges, Concealed, Stainless Steel

Casement Hinges, Concealed, Stainless Steel
  • Smooth gliding delrin shoes.
  • 90 degree stop.
  • Stainless steel tracks and base material.
  • Uses #7 stainless steel flat head screws (not included but offered for purchase during checkout). One pair of hinges uses 14 screws. Order our SKU #800340 for the #7 x 3/4" stainless steel flat head screw.
Click here for Information & Pricing

4 Bar Hinge, Stainless Steel, Standard Duty with Stop, Truth 201 Series

4 Bar Hinge, Stainless Steel, Standard Duty with Stop, Truth 201 Series
  • Designed for residential projects requiring relatively light window sections.
    • Maximum weight of 40lbs depending on model. See spec sheet for exact weight limits.
    • Click on PDF link below for actual maximum weight specs and other info.
  • Truth 201 Series, 4 Bar Standard Duty Window Hinges, for casement or awning windows and for projected vents with a lip on the outside edge.
  • 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
  • These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
  • Features set screw friction adjustment.
  • These hinges also feature a "stop". Click on link below for stop opening angle.
  • Available in 4 sizes, click on link below to see dimensions.
  • Made from stainless steel.
  • PLEASE NOTE: Model sizes listed below are nominal sizes. For actual length of hinge, click on link below.
  • Each hinge uses #10 Pan Head Stainless Steel Screws (see Dimensional Diagram for number of screws per hinge). Not included but offered for purchase during checkout.
  • Hinges are sold by the each. Order two hinges per window.
Click here for Information & Pricing

4 Bar Hinge, Stainless Steel, Heavy Duty with Stop, Truth 301 Series

4 Bar Hinge, Stainless Steel, Heavy Duty with Stop, Truth 301 Series
  • Designed for commercial projects requiring heavier window sections.
    • Maximum weight of up to 200 lbs depending on model. See spec sheet for exact weight limits.
    • Click on PDF link below for actual maximum weight specs and other info.
  • Truth 301 Series, 4 Bar Heavy Duty Window Hinges, for casement or awning windows and for projected vents with a lip on the outside edge.
  • 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
  • These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
  • Features set screw friction adjustment.
  • These hinges also feature a "stop". Click on link below for stop opening angle.
  • Available in 8 sizes, click on link below to see dimensions.
  • Made from stainless steel.
  • PLEASE NOTE: Model sizes listed below are nominal sizes. For actual length of hinge, click on link below.
  • Each hinge uses #10 Pan Head Stainless Steel Screws (see Dimensional Diagram for number of screws per hinge). Not included but offered for purchase during checkout.
  • Hinges are sold by the each. Order two hinges per window.
Click here for Information & Pricing

4 Bar Hinge, Stainless Steel, Heavy Duty with 90 Degree Stop, 601 Series

4 Bar Hinge, Stainless Steel, Heavy Duty with 90 Degree Stop, 601 Series
  • Heavy Duty 4 Bar hinges are made for casement windows (not for awning windows).
  • 601 Series, Truth brand hinge.
  • They have the capability of producing 90 degrees of window opening.
  • 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
  • They are non-handed. Hinge is reversible, works on left opening and right opening casement windows.
  • Made from non-magnetic stainless steel arms and track with a brass shoe that is tension adjustable.
  • For window weights of up to 120lbs and 36" in width.
  • For full detailed information from manufacturer, click on the links below.
  • PLEASE NOTE: Model sizes listed below are nominal sizes. For actual length of hinge, click on link below.
  • Each hinge uses #10 Pan Head Stainless Steel Screws (see Dimensional Diagram for number of screws per hinge). Not included but offered for purchase during checkout.
  • Hinges are sold by the each. Order two hinges per window.
Click here for Information & Pricing

Truth Heavy Duty 4-Bar Egress Hinge, 333 Series

Truth Heavy Duty 4-Bar Egress Hinge, 333 Series
  • Truth brand, 333 Series, heavy duty 4-bar casement window hinge with stop at 90 degrees.
  • This hinge is designed as an "Egress Hinge". When fully open, the sash is positioned close to the side jamb to allow an average sized person the ability to escape through the window's opening in case of an emergency as required by Egress Codes (always check with your local building department for your local building code requirements).
  • Maximum weight of up to 158 lbs for a 36" wide window. Made for sash width range of 18" to 36".
  • 4 Bar Heavy Duty Window Hinges are designed for projected vents with a lip on the outside edge.
  • 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
  • These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
  • Features set screw friction adjustment.
  • Nominal size is 16". Actual length is 16.75".
  • Made from stainless steel.
  • Each hinge uses #10 Pan Head Stainless Steel Screws (6 screws per hinge). Not included but offered for purchase during checkout.
  • Hinges are sold by the each. Order two hinges per window.
Click here for Information & Pricing

4 Bar Hinge, Stainless Steel, 12 Inch Standard Duty, Truth 401 Series

4 Bar Hinge, Stainless Steel, 12 Inch Standard Duty, Truth 401 Series
  • Truth 401 series, 4 bar hinge for casement windows.
  • Designed for residential projects requiring relatively light window sections.
  • Maximum weight of 65lbs for a 32" wide window. Fits sash widths of from 12" to 36"
  • Nominal size is 12". Actual length is 12.156".
  • 4 Bar Standard Duty Window Hinges, for casement windows and for projected vents with a lip on the outside edge.
  • 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
  • These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
  • Features set screw friction adjustment.
  • Hinge stops at 90 degrees.
  • Click on link below for dimensions.
  • Made from stainless steel.
  • Each hinge uses #10 Pan Head Stainless Steel Screws (6 per hinge). Not included but offered for purchase during checkout.
  • Hinges are sold by the each. Order two hinges per window.
Click here for Information & Pricing

Awning Hinges, Concealed, Stainless Steel

Awning Hinges, Concealed, Stainless Steel
  • Heavy gauge stainless steel support arms.
  • Stainless steel reinforced shoe.
  • Adjustable tension.
  • Stainless steel base material.
  • Uses #7 x 3/4" flat head stainless screws (not included but offered for purchase during checkout. Order SKU 800340.)
  • The quantity of screws required per hinge is listed below. For example for hinge #800318 you should order 20 screws per pair of hinges.
Click here for Information & Pricing

Quiki Window Control

Quiki Window Control
  • The Quiki window control tightens sash windows when the sash cord is broken.
  • Installs easily between the window frame and the window. No tools necessary for installation.
  • Can be used in new or old double hung windows.
  • Made from 0.018" thick stainless steel.
  • Size is 1-1/4" wide by 6" long.
  • Sold by the package. There are two controls per package.
  • You will need one or two controls per window depending on the weight and condition of the window.

Finishes:

  • Stainless steel
Click here for Information & Pricing

Sash Chain

Sash Chain
  • Chain for use in sash type windows with weights.
  • Available in solid brass or stainless steel materials.
  • Each link is approximately 3/4" long by 3/8" wide.
  • Chain is sold by the full foot. For example if you need 4.5 feet please order 5 feet.
  • Sash chain cuts easily with diagonal cutters.

Finishes:

  • Solid Stainless Steel
Click here for Information & Pricing

Stainless Steel Screen Hangers

Stainless Steel Screen Hangers
  • For screens or storm sashes which are hung flush with the casing.
  • Hanger measurement as shown in photo is 2-3/8" tall by 2" wide.
  • Solid stainless steel will not rust or corrode.
  • Includes stainless steel wood screws
  • Sold in two different set configurations; Set A includes 2 top pieces and 2 screen pieces.Set B includes 2 top pieces and 4 screen pieces (two for the screen and two for the storm sash)
  • Order one set per window

Finishes:

  • Natural Stainless Steel
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

High quality, received them promptly without special shipping. Great quality, saved over 100.00 over Home Depot. ... (Read review)
Very reliable vendor - would do business with again. Very prompt shipping and the order was processed flawlessly! ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com