Gate Latches & Locks, Stainless Steel

Gate Latches & Locks, Stainless Steel

This section contains many different types of gate latches, gate deadbolts, gate hasps, gate slide bolts, and gate locks, all made from stainless steel.

Gate Bolt, Stainless Steel

Gate Bolt, Stainless Steel
  • Stainless steel bolt is very high quality and secures gates and garage doors.
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Available in three sizes; Large measures 5-1/4" by 2-3/4". Small measures 4" by 2-1/4". Mini measures 2-3/4" by 1-1/2".
  • Two different strike plates are included. The strike can either be surface mounted or edge mounted.
  • Includes stainless steel screws.
  • Bolt can be locked in either the open position or the closed position with a padlock.
  • The bolt on the "small" size is .350" in diameter. The bolt on the "large" size is .475" in diameter. The bolt on the "mini" size is .250".

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Gate Slide Bolt, Stainless Steel

Gate Slide Bolt, Stainless Steel
  • Stainless steel slide bolt secures gates and garage doors.
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Measures approximately 6.5" by 2.25"
  • Strike plate can be mounted either as a surface mount or edge mount plate.
  • Includes stainless steel screws and 1/4" by 2.5" stainless steel carriage bolts.
  • Bolt can be locked in either the open position or the closed position with a padlock.
  • Diameter of slide bolt is just under 3/8"
  • Made from solid stainless steel (Type 304)

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Gate Latch, Straight Arm, Stainless Steel

Gate Latch, Straight Arm, Stainless Steel
  • Gate latch for use around a pool, in a marine or corrosive environment or anywhere the look of satin stainless steel is desired.
  • Safe for use on redwood, cedar, ACQ lumber (treated lumber) and vinyl.
  • Baseplate measures 1-5/8" by 1-1/2".
  • Latch bar measures 4-1/4".
  • Installs on hinged side of gate. For single acting gates (gates that open in only one direction).
  • Made from solid stainless steel (Type 304)
  • Stainless steel screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Barrel Bolt, Satin Stainless Steel

Barrel Bolt, Satin Stainless Steel
  • Stainless steel barrel bolt has a satin stainless steel finish.
  • Width is 1-1/16". Length is 7.5". Projection is 5/8".
  • Made from Type 304 stainless steel. Slide bolt and knob are made from brass and nickel plated.
  • Comes with two keepers. One keeper is for surface mounting the other keeper is for edge mounting.
  • Stainless steel flat head screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Barrel Bolt, 5 Inch Stainless Steel

Barrel Bolt, 5 Inch Stainless Steel
  • Barrel bolt is made of heavy duty solid stainless steel.
  • Made from solid stainless steel (Type 304)
  • Bolt measures 5.5" long by approximately 3/4" in diameter.
  • The bolt housing and surface strike measure 6-3/8" by 2-3/4" (as shown in photo).
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • The bolt can be locked with a padlock in the locked position.
  • A surface mounted strike plate and an edge mounted strike plate are included. Stainless steel screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Hasp, Stainless Steel

Hasp, Stainless Steel
  • Stainless steel hasp accepts padlock for locking gates, boxes, chests, doors, cabinets, etc.
  • Made from Type 304 stainless steel.
  • Available in 4 sizes; Large, Medium, Small and Extra Small.
  • Stainless steel screws are included.
  • Padlock eye rotates 360 degrees. When a padlock is attached the padlock eye is held in the vertical position (via gravity) to help secure the hasp.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Gate Deadbolt with Stainless Steel Exterior Trim

Gate Deadbolt with Stainless Steel Exterior Trim
  • Deadbolts for gates with exterior trim pieces made from stainless steel.
  • Available in Single Cylinder or Double Cylinder.
  • Double Cylinder model is keyed on both sides.
  • Single Cylinder model has a keyed side for the outside of the gate and a throw knob for the inside of the gate.
  • For gate thicknesses of 1-3/8" to 1-3/4".
  • Installs in a 2-1/8" round hole.
  • Both locks use the common Schlage keyway.
  • All screws and hardware necessary for installation are included.
  • PLEASE NOTE; the inside workings of these locks are not made from stainless steel. We do not know of any dead bolt system that is made from 100% stainless steel, inside and out. We offer these items for gates because they offer much better corrosion resistance than other dead bolts where the outside trim pieces are made from plated steel.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

High quality, received them promptly without special shipping. Great quality, saved over 100.00 over Home Depot. ... (Read review)
quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com