• Stainless steel pulls for drawers and cabinets.
• Available in sizes ranging from 5" to 56.5" long.
• All sizes have two attachment legs except for the two largest sizes (46" and 54") which have 3 attachment legs.
• The "center-to-center" dimension refers to the distance between the center of the screwholes of the attachment legs.
• The diameter of the pull is approximately 1/2" (actual dimension is 12mm).
• The projection (or height) of the pull is 1.3".
• Made from solid stainless steel.
• Two sets of screws are included. One set is 1-1/8" long. The second set is 1-7/16" long. PLEASE NOTE; screws are made from plated steel.

Finishes:

• Stainless Steel

• Tear drop style edge flush mounted edge pull for sliding doors and cabinets.
• Measures 3-3/4" tall by 1-5/16" wide by 9/16" thick.
• Edge pull fits into a cutout which measures 3-1/2" tall by 1-1/32" wide by 1/2" deep.
• Made from solid stainless steel.
• Attaches with one flat head screw which is included.
• In its normal position the pull hangs vertically in the box. Photo shows the pull at a slight angle for effect.

Finishes:

• Satin Stainless Steel

• Solid stainless steel finger pull for sliding cabinet doors, pocket doors, etc.
• May be flush mounted.
• Pull measures 2-3/4" tall by 15/16" wide. Plate thickness is 1/8". Fits in a 7/8" deep cutout.
• Wood screws are included.

Finishes:

• Satin Stainless Steel

• Pull for pocket doors remains recessed in edge of door until you push on the tab at the bottom and pull it to the open position.
• Made from solid stainless steel material.
• Mounting plate measures 5-5/8" by 3/4".
• Fits into a cutout that is 5/8" by 4-1/2" by 2-1/4" deep.
• Pull projects about 2" when in the open position.
• Uses #8 flat head screws. Not included but offered for purchase during checkout.

Finishes:

• Satin Stainless Steel

• Stainless steel handle for chests.
• Handle measures 4-1/4" wide by 2-7/8" tall. Flip up handle projection is 2-5/16".
• Uses 4 pan head #8 screws per handle (not included but offered for purchase during checkout).
• Handle comes in a raw industrial type finish.

Finishes:

• Natural Stainless Steel (unpolished)