Butler Tray Table Hinges, Stainless Steel

• Hinge measures 2" in the open position.
• Hinge is 1-1/2" wide.
• Hinge is 3/64" thick (9/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
• Made from Type 304 stainless steel.
• The hinge incorporates a stop which holds the hinge flat in the horizontal position.
• Hinge mortises flush into surface of table.
• Hinge folds back a full 180 degrees onto the table.
• Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Hinge measures 3-1/4" in the open position.
• Hinge measures 1-3/16" wide.
• Hinge is 1/16" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
• Made from Type 304 stainless steel.
• Hinge incorporates a stop which holds the hinge flat in the horizontal position.
• Hinge mortises flush into surface of table.
• Hinge folds back a full 180 degrees onto the table.
• Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Hinge measures 3" in the open position.
• Hinge measures 1-1/2" wide.
• Hinge is 1/16" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
• Made from Type 304 stainless steel.
• Hinge has a stop which holds the hinge flat in the horizontal position.
• Hinge mortises flush into surface of table.
• Hinge folds back a full 180 degrees onto the table.
• Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Hinge measures 3" in the open position.
• Hinge measures 1-1/2" wide.
• Hinge is 1/16" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
• Made from Type 304 stainless steel.
• Hinge has a stop which holds the hinge flat in the horizontal position.
• Hinge mortises flush into surface of table.
• Hinge folds back a full 180 degrees onto the table.
• Uses #8 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished