Large Butt Hinges, Stainless

Large Butt Hinges, Stainless

Stainless steel butt hinges for full size doors. Includes square corner, 1/4" radius corner and 5/8" radius corner. Also includes both Architectural grade stainless steel hinges and Residential grade stainless steel hinges and stainless steel flag or no-mortise hinges. Sizes range from 3-1/2" x 3-1/2" to 5" x 5".

Full Mortise Butt Hinge, Stainless Steel

Full Mortise Butt Hinge, Stainless Steel
  • These Architectural Grade hinges are recommended for the heavier doors found on custom homes and as an upgrade for Residential Grade hinges. Architectural Grade hinges are thicker and of much higher quality than Residential Grade hinges.
  • The hinges in this section are plain bearing hinges. We recommend ball bearing hinges for high frequency doors and doors equipped with door closers
  • The 3" & 3-1/2" hinges come with wood screws
  • The 4" and larger hinges come with wood screws and machine screws
  • They are made of stainless steel base material
  • They have stainless steel pins

*NRP (non-removable pin) hinges have a set screw in the barrel that is accessible only when door is swung open. This security feature deters someone from removing the hinge pin and the door.

Finishes:

  • 630 (US32D) stainless steel material, satin finish
Click here for Information & Pricing

Stainless Steel Full Mortise Ball Bearing Butt Hinge

Stainless Steel Full Mortise Ball Bearing Butt Hinge
  • These Architectural Grade hinges are recommended for the heavier doors found on custom homes and as an upgrade for Residential Grade hinges. Architectural Grade hinges are thicker and of much higher quality than Residential Grade hinges.
  • All hinges come with stainless steel screws.
  • Made from stainless steel base material.
  • Ball bearings and bearing raceways are made from stainless steel.
  • Hinge pin is stainless steel.

*NRP (non-removable pin) hinges have a set screw in the barrel that is accessible only when door is swung open. This security feature deters someone from removing the hinge pin and the door.

Finishes:

  • 630 (US32D) stainless steel material, satin finish
Click here for Information & Pricing

Stainless Steel Square Corner Residential Hinges

Stainless Steel Square Corner Residential Hinges

  • Solid stainless steel residential hinges.
  • For use anywhere the look of stainless steel is desired and great for corrosive or damp environments.
  • The 3-1/2 x 3-1/2 hinges have 6 screwholes per hinge in an "arc" pattern.
  • The 4 x 4 hinges have 8 screwholes per hinge in a "zig-zag" pattern.
  • Screws are included.
  • Please note that the photo shows a polished stainless finish that is no longer available.

Please note the UNIT when ordering hinges in this section. A PAIR means two hinges. In this section, you may order by the half pair. For example if you want 3 hinges order 1.5 pair.

Finishes:

  • 630(US32D) Satin Stainless Steel (same as Satin Nickel finish)
Click here for Information & Pricing

Stainless Steel 1/4" Radius Round Corner Residential Hinges

Stainless Steel 1/4
  • Solid stainless steel residential door hinges
  • The 3-1/2 x 3-1/2 hinges have 6 screwholes per hinge in an "arc" pattern.
  • The 4 x 4 hinges have 8 screwholes per hinge in a "zig-zag" pattern
  • Screws are included

Please note the UNIT when ordering hinges in this section. A PAIR means two hinges. In this section, you may order by the half pair. For example if you want 3 hinges order 1.5 pair.

Finishes:

  • 629(US32)Polished Stainless steel
  • 630(US32D) Satin stainless steel. This finish is the same as Satin Nickel
Click here for Information & Pricing

Stainless Steel 5/8" Radius Round Corner Residential Hinges

Stainless Steel 5/8
  • Solid stainless steel residential door hinges
  • The 3-1/2 x 3-1/2 hinges have 6 screwholes per hinge in an "arc" pattern.
  • The 4 x 4 hinges have 8 screwholes per hinge in a "zig-zag" pattern
  • Screws are included

Please note the UNIT when ordering hinges in this section. A PAIR means two hinges. In this section, you may order by the half pair. For example if you want 3 hinges order 1.5 pair.

Finishes:

  • 629(US32)Polished Stainless steel
  • 630(US32D) Satin stainless steel. This finish is the same as Satin Nickel
Click here for Information & Pricing

4 Inch No-Mortise Hinge

4 Inch No-Mortise Hinge
  • Large (4" tall) ball bearing no-mortise hinge (also known as non-mortise hinge).
  • This hinge does not require mortising of the door or the frame (A mortise is a cut-out that the hinge fits into).
  • Made for doors that are 1-3/4" thick.
  • After installation there will be only a 3/32" gap between the door and frame.
  • Hinge is 4" tall.Thickness of hinge is 3/32".
  • The base material of the stainless steel hinge is stainless steel.
  • The ball bearings are made of stainless steel.
  • Hinge pin is removable. There is a small hole in the bottom hinge pin cap. The hinge pin can be removed by using tapping out with a pin punch and hammer.
  • Each hinge uses 8 each #10 screws. Screws are included with hinge.
  • These hinges are sold by the "Each". You would normally order 2 or 3 hinges per door.

IMPORTANT HANDING INFORMATION: This hinge is "handed". There is a "Left Hand" model and a "Right Hand" model. Please see the links below before ordering so that you will get the correct hinge for your door.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Stainless Steel Wide Throw Butt Hinges

Stainless Steel Wide Throw Butt Hinges
  • A wide throw hinge sets the pivot point out away from the door allowing the door to open 180 degrees (depending on obstructions in the swing path of the door).
  • Wide throw hinges can be used when a door is set in a wide door jamb.
  • Stainless steel base material. Good for use outdoors, on sea coasts or any where the look of satin stainless steel is desired.
  • Designed for full mortise installation.
  • Wood screws are included.

Finishes:

  • 630 (US32D) Satin Stainless Steel
Click here for Information & Pricing

Large Lift-Off Hinges, Stainless Steel

Large Lift-Off Hinges, Stainless Steel
  • Loose joint hinge, opened door may be lifted off after installation.
  • Available in either a "Left Hand" or a "Right Hand" model.
  • Made from stainless steel (Type 304) with a satin stainless steel finish.
  • Available in a 4 x 4 inch model or a 4.5 x 4.5 inch model.
  • Hinge thickness is 0.14".
  • Hinge pin is 11/32" in diameter.
  • Stainless steel wood screws are included.
Click here for Information & Pricing

Large Stainless Steel Flag Hinges

Large Stainless Steel Flag Hinges
  • No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
  • Leaves only a 1/8" gap after installation.
  • Top leaf rides on a ball bearing located on the top of the hinge pin.
  • Hinge is not handed, may be used on left or right opening doors.
  • Hinge shown in photo is shown in the "door open" position.
  • Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
  • Made from solid type 304 stainless steel.
  • Available in two sizes, a 4" high hinge and a 5" high hinge.
  • The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
  • The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
  • Weight ratings listed below are for a pair of hinges.
  • Stainless steel flat head screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Stainless Steel Butt Hinge, 4-1/2 x 4, Type 316

Stainless Steel Butt Hinge, 4-1/2 x 4,  Type 316
  • Heavy duty stainless steel butt hinge made from Type 316 Stainless Steel (Investment cast).
  • Type 316 Stainless Steel is a high grade stainless steel, also known as Marine Grade Stainless Steel.
  • Hinge features a non-removeable hinge pin and integral nylon bearings for a silent no-rattle movement.
  • May be surface mounted or installed as a full mortise butt hinge.
  • If installed as a full mortise butt hinge, the door thickness range is 1-3/8" to 1-3/4".
  • If installed as a full mortise hinge, it requires a deeper mortise than a normal 4-1/2 x 4 hinge (approximately a 1/4" deep per leaf).
  • Hinge leafs are 3/16" thick.
  • Uses #14 flat head screws (8 per hinge), not included but offered for purchase during checkout. Screws offered at checkout are Type 304 stainless.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Stainless Steel Butt Hinge, 3-7/8", Type 316

Stainless Steel Butt Hinge, 3-7/8
  • Heavy duty stainless steel butt hinge, made from Type 316 stainless steel.
  • Type 316 stainless steel is a high grade stainless steel, also known as marine grade stainless.
  • Hinge is produced by casting and the hinge pin is not removable.
  • Actual measurement of hinge is 3-7/8" tall by 3-7/8" wide. The hinge thickness is 1/4".
  • This hinge is meant to be surface mounted rather than installed as a full mortise butt hinge.
  • Uses #14 flat head screws. Screws are not included but are offered for purchase during checkout. Screws offered at checkout are Type 304 stainless.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing
accredited business BBB
see what customers are saying

Over 10,000 Reviews
5 Star Average

High quality, received them promptly without special shipping. Great quality, saved over 100.00 over Home Depot. ... (Read review)
quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com