• Excellent for use anywhere corrosion is a problem or the look of stainless steel is desired.
• Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
• Made from solid stainless steel (Type 304)
• Stainless steel screws are included.
• PLEASE NOTE: The "Size" refers to the length of one hinge leaf. The "Size Open" dimension is the tip-to-tip measurement when the hinge is in the open position as shown in the photo.

Finishes:

• Satin Stainless Steel

• Hinge measures 2-7/8" in the open position.
• Hinge measures 1-1/2". wide
• Made from Type 304 stainless steel.
• Uses 6 each #6 flat head screws (not included). Flat head stainless steel wood screws are offered for purchase during checkout.

Finishes:

• Polished

• Stamped stainless steel hinge.
• Made from Type 304 stainless steel.
• Polished finish
• Short leaf measures 1-3/8". Wide leaf measures 2-5/8".
• Uses 5 each #8 flat head screws (not included). Stainless steel flat head screws are offered for purchase during checkout.

Finishes:

• Polished

• Hinge is stamped stainless steel.
• Made from Type 304 stainless steel
• Polished finish
• Uses 6 each #8 flat head screws (not included). Stainless steel flat head screws are offered for purchase during checkout.
• Both sizes use 6 screws per hinge

Finishes:

• Polished

• Hinge is stamped stainless steel.
• Made from Type 304 stainless steel.
• Polished finish
• Uses 6 each #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Made from stamped stainless steel.
• Stainless steel is type 304.
• Polished finish
• Use #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.
• The 4" hinge uses 4 screws
• the 6" hinge uses 6 screws

Finishes:

• Polished

• Hinge is made from stamped stainless steel
• Stainless steel is Type 304
• Polished finish
• Uses 8 each #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Hinge is made from stamped stainless steel
• Stainless steel is Type 304
• Polished finish
• Uses 6 each #10 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Hinge is made from stamped stainless steel.
• Stainless steel is Type 304.
• To install this hinge you should mortise the wood to accept the hinge knuckle
• 1/16" material thickness
• Polished finish
• Uses 6 each #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

• Polished

• Stainless steel strap hinge is meant for use with cedar, redwood, vinyl or ACQ (treated) lumber.
• Also for use in corrosive environments or where the look of stainless steel is desired.
• Heavy duty strap hinge. Door or gate can be lifted off after installation.
• Made from solid stainless steel material (0.156" thickness).
• Vertical mounting plate measures 2" wide by 6.5" tall.
• Stainless steel wood screws are included. Also included are 1/2" x 4" stainless steel carriage bolts (one per hinge). Carriage bolts install in the square hole as a through bolt.
• Hinge is made from Type 316 Stainless. Fasteners are made from Type 305 Stainless.
• These hinges are sold by the pair. A pair is two hinges.

• Stainless steel strap hinge made for surface mounted installations.
• Hinge measures 3-1/8" tall by 5" wide.
• Made from type 304 stainless steel.
• Each hinge uses 4 each #14 pan head screws (not included but offered for purchase during checkout).

Finishes:

• Natural Stainless Steel

• Heavy duty strap hinge for gates, truck doors or anywhere a heavy duty stainless steel strap hinge is needed.
• Made for surface mounted flush installation.
• Made from 0.197" thick stainless steel.
• Horizontal strap measures 2.5" tall by 7-3/8" wide (measured from center of hinge pin).
• Vertical strap measures 4-1/8" tall by 2-1/4" wide (measured from center of hinge pin).
• Hinge pin is removable (held in place by a circlip). Hinge pin features a zerk fitting to allow lubrication.
• Each hinge uses 6 each 5/16" lag screws (not included but offered for purchase during checkout).

Finishes:

• Polished Stainless

• Beautifully polished stainless steel strap hinge, made from Type 304 stainless steel.
• Horizontal strap measures 3.5" from center of hinge pin to end of strap.
• Vertical strap measures 2-1/4" tall by 1-3/8" from center of hinge pin to edge of strap.
• Thickness is 0.135".
• Hinge is designed for flush installation (surface mounted).
• Each hinge uses 4 each #14 pan head screws (not included but offered for purchase during checkout).

Finishes:

• Polished Stainless Steel

• Stainless steel hinge for use near marine environments or anywhere the look of stainless steel is desired.
• Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
• Hinge measures approximately 4.25" tall by 5" wide.
• Short leaf is 1-9/16" wide. Long leaf is 3-3/8" wide.
• Stainless steel fasteners are included.

Finishes:

• Satin Stainless Steel