• Heavy duty strap hinge with Traditional British Hardware styling.
• Strap is approximately 3/16" thick and 2" wide. Hinge pin is 5/8" in diameter.
• Hardware as it is installed on post side of hinge measures approximately 6.5" tall by 2-1/4" wide.
• Black finish is a heavy black powder coating. Galvanized finish is a true heavy galvanizing suitable for outdoor use near a seacoast.
• Matching wood screws are included. One galvanized through bolt is included per hinge. Through bolt is mounted in square hole.

Finishes:

• Black Powder Coat
• Galvanized

• These are the same hinges as our "Heavy Duty British Style Strap Hinges" except they are heavier and longer.
• Extra Heavy duty strap hinge with Traditional British Hardware styling.
• Strap is approximately 7/32" thick and 2-3/4" wide. Hinge pin is 7/8" in diameter.
• Hardware as it is installed on post side of hinge measures approximately 9.5" tall by 3" wide.
• Black finish is a heavy black powder coating.
• Matching wood screws are included. One through bolt is included per hinge. Through bolt is mounted in square hole.

Finishes:

• Black Powder Coat

• Heavy duty strap hinge, door or gate can be lifted off after installation.
• Available in two finishes; powder coated black or heavy galvanized (true galvanizing not zinc plated). Galvanized models are suitable for sea coast use.
• Traditional British Hardware styling.
• Made from 3/16" thick steel.
• Vertical mounting plate sizes; For SKU 215108 it measures 1-7/16" x 5-1/4". For SKU 215130 and 215110, it measures 1.5" x 5-3/8". For SKU 215132 and 215112, it measures 2" x 6.5". For SKU 215134 and 215114, it measures 2-3/16" by 6.5". SKU 215136 vertical plate measures 8" by 2-3/16".
• Matching wood screws are included. One galvanized through bolt is included per pair of hinges(carriage bolt; 3/8" x 4"). Through bolt is mounted in square hole.

Finishes:

• Powder Coated Black
• Galvanized

• Strap hinges are available in either a "Rough Black Iron" or a "Smooth Black Iron" finishes.
• Strap hinges are available in 4 lengths; 15-5/8", 19-5/8", 30" and 36".
• For interior or exterior use.
• Hinge pin is removable.
• Pad (small hinge leaf) is reversible for full or half-surface installation.
• Comes complete with matching screws.
• Weight rating is based on using 3 hinges per gate or door. For the 30" and the 36" hinges the weight rating is based on using 2 hinges per door.
• These hinges match our other black iron hardware found in the Gate Hinges & Hardware section.

Finishes:

• Smooth Black Iron
• Rough Black Iron

• Strap angle is adjustable to fit gates and doors with curved edges.
• Hinge has a true galvanized finish (not zinc chromate plated), suitable for use around a sea coast.
• Hinge strap is approximately 2-1/4" wide by 3/16" thick.
• Vertical wing measures approximately 8" tall by 2-1/2" wide.
• Angle of strap may be set at any angle from horizontal to 90 degrees up or down.
• Made from steel base material.
• Wood screws are provided for the vertical wing and 9/16" x 4" carriage bolts are provided for the strap.

Finishes:

• Galvanized

• For interior or exterior use
• Hinge pin is removable
• Pad is reversible for full or 1/2 surface installation
• Comes complete with matching screws
• Be sure to see our other Black Iron Gate Hardware in the sections entitled "Gate Latches and Handles" and "Other Gate Hardware"

Finishes:

• Smooth Black Iron

• Beautiful lift-off type gate hinge with uniquely textured surface.
• Door or gate can be lifted off after installation.
• Strap is made from 2" wide by 1/4" thick steel.
• Vertical plate measures 1-3/4" by 6-1/4" by 7/32". Pintle diameter is 5/8".
• Wood screws are included.

PLEASE NOTE; the post plate and the gate plate for this hinge are offset from each other by 1/2". For most gate installations, this is not a problem. However, if you want your gate and post to be perfectly flush, you should not choose this hinge.

Finishes:

• Black Powder Coated

• Strap hinges are available in two finishes. The 4 smaller sizes are a "Rough Black Iron" finish. The 2 larger sizes are a "Smooth Black Iron" finish.
• The hinge pin is removable so that the pad (smaller leaf) may be reversed. This allows the hinge to be installed as either a full-surface hinge or a half-surface hinge.
• The weight rating on the 9" and 13" hinge applies to a door with a maximum door thickness of 1-3/8" and a maximum door width of 32" using 3 hinges per door.
• The weight rating on the 17" and 20.5" hinge applies to a door with a maximum door thickness of 1-3/4" and a maximum door width of 36" using 3 hinges per door
• The 30" and 36" hinges are extra heavy duty hinges and are rated at 600# per pair of hinges.
• These hinges match our "Heart" style gate latches found in the Gate Latch and Gate Lock section of the website. Two "Heart" style latches are offered for purchase during checkout.
• Complete with screws.
• Made from steel base material.

Finishes:

• Black Iron

• heavy duty construction minimizes gate sag
• durable black finish
• reversible pin provides for right or left hand applications
• steel base material
• complete with lag screws

Finishes:

• Black Coated

• steel base material
• coated with a durable black finish
• reversible pin provides for right or left hand applications
• post leaf is 4"
• strap length is 7-11/16"
• complete with lag screws

Finishes:

• Black Coated

• steel base material
• coated with a durable black finish
• reversible pin provides for right or left hand installations
• post leaf is 4-7/16"
• strap length is 8"
• complete with lag screws

Finishes:

• Black Coated

• Hinge features a decorative scalloped design.
• Made from steel base material.
• Hinge is coated with a durable black finish.
• Features a special bearing to give extended service.
• Complete with screws.
• PLEASE NOTE: The "Size" refers to the length of one hinge leaf. The "Size Open" dimension is the "tip-to-tip" measurement when the hinge is in the open position as shown in the photo.

Finishes:

• Black Coated

• Solid bronze strap hinge for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
• Hinge strap measures approximately 12" in length. Width of hinge strap is 1-1/4". Thickness of strap is approximately 5/16".
• Pintle plate measures 3-3/4" by 1-1/4".
• Stainless steel wood screws are included. Screws are coated with a matching bronze finish.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
• PLEASE NOTE: This hinge is made up of two parts that must be ordered separately; the pintle plate and the hinge strap. Please make sure to order one pintle plate and one hinge strap to make up each hinge that you intend to order.

• Antique style strap hinge made for surface mounting (door and frame are flush with each other).
• Strap leaf measures 11-3/4" by 2-3/8" at widest point.
• Vertical leaf measures 4-5/16" by 1-1/8".
• Measurements are to center of hinge pin.
• Hinges are weight rated at 30 lbs. per pair.
• Made from steel base material. Matching wood screws are included.

Finishes:

• Black Powder Coated

• Antique style shutter hinge made for surface mounting.
• Strap leaf measures 12-1/4" by 2-3/4" at widest point.
• Vertical leaf measures 5-1/4" by 1-3/8".
• Width measurements are to center of hinge pin.
• Hinges are weight rated at 50 lbs per pair.
• Made from steel base material. Matching wood screws are included.

Finishes:

• Black powder coated

• Ornamental strap hinge is meant to be surface mounted (door and frame are flush with each other).
• Available in two lengths; an 11" strap length and an 18" strap length (measured from tip to center of hinge pin).
• Hinge leaf measures 4" tall.
• Matching flat head wood screws are included.
• Made from steel base material and powder coated black to resist corrosion.

Finishes:

• Black Powder Coated

• Ornamental strap hinge is meant to be surface mounted.
• Strap measures 15" long and 6" at its widest point.
• Hinge leaf measures 4" tall by 1-3/8".
• Matching flat head wood screws are included.
• Made from steel base material.
• Rated at 70 lbs per pair.

Finishes:

• Black Powder Coated