• Hinge is made of steel base material
• Decorative finial tips
• Size is 2" tall by 1-1/2 inch wide
• Tip-to-tip measurement is 2-13/16"
• Flat head matching wood screws are included
• Hinge is shown in polished brass finish. To view other finishes click on link below.

Finishes:

• Polished Brass
• Antique Copper
• Satin Nickel
• Polished Nickel
• Oil Rubbed Bronze

• Size is 2-1/2" tall by 1-5/8" wide
• Tip-to-tip measurement is 3-9/16"
• Decorative finial tips
• Steel base material
• Matching flat head screws are included
• Finish shown in photo is Satin Nickel

Finishes:

• Satin Nickel
• Statuary Bronze
• Antique Brass
• Polished Brass
• Oil Rubbed Bronze

• Very nice ball tip hinge made from steel.
• Available in five finishes.
• Hinge thickness is 0.040".
• Joint length means distance along hinge pin not including ball tips.
• Matching flat head screws are included.
• PLEASE NOTE: SKU 504525 is actually made from solid brass but since the screws that come with it are made from steel we must include this hinge in the steel hinge section.

Finishes:

• Polished Brass
• Oil Rubbed Bronze
• Satin Nickel
• Polished Nickel
• Antique Brass

• Very high quality, solid brass hinge. Designed for full mortise installation.
• This hinge works well on doors that are from 3/4" to 1" thick.
• Overall size is 2-1/2" tall by 1-11/16" (open).
• Tip-to-tip measurement is 3-1/2"
• Matching wood screws are included.
• One leaf is swaged to allow a smaller mortise.
• Middle screwholes are elongated to allow for vertical and horizontal adjustment during installation.
• Each leaf measures 11/16" by 2-1/2"
• Click on link to view a chart of available finishes for this hinge.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Flat Black
• Gloss Oil Rubbed Bronze
• Oil Rubbed Bronze
• Antique Copper
• Polished Brass
• Polished Nickel
• Polished Chrome
• Satin Nickel, Matt
• Iron / Pewter
• Venetian Bronze

• Very high quality, solid brass hinge. Designed for full mortise installation but can be used as a surface mounted hinge.
• This hinge works well on doors that are from 3/4" to 1" thick.
• Nominal size is 2" tall by 1-5/8" (open). The actual measurements are 1-31/32" x 1-19/32" (open).
• Tip-to-tip measurement is 2-3/4"
• Matching wood screws are included.
• Four screwholes are elongated to allow for vertical and horizontal adjustment during installation.
• Each leaf measures 1-31/32" by 11/16".
• Click on link to view a chart of available finishes for this hinge.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Flat Black
• Gloss Oil Rubbed Bronze
• Oil Rubbed Bronze
• Old Copper
• Polished Brass
• Polished Nickel
• Polished Chrome
• Satin Nickel, Matt
• Iron / Pewter
• Venetian Bronze

• Beautiful high quality No-mortise style hinge with finial tips.
• Available in two finishes:
  • Satin Nickel (shown in photo)
  • Polished Nickel
• Made for 3/4" thick doors.
• The door hinge leaf has a 7/8" by 2-3/4" wrap around for extra holding power.
• Hinge measures 4" tall tip-to-tip and approximately 1-3/8" wide.
• Made from steel base material.
• Uses #6 flat head screws (not included but offered for purchase during checkout. Order 6 screws per hinge. Order the "Bright Nickel" finish screws for both of these hinges. Satin Nickel screws do not exist in this size.
• This hinge is sold by the each. You would normally order 2 or 3 hinges per door.

• steel base material
• decorative finial tip at each pin end
• 6 knuckle design
• flat head screws are included

Finishes:

• Antique English

• Very nice ball tipped hinge made from steel.
• Available in four finishes. The upper left hand hinge shown in the photo is the Oil Rubbed Bronze, (moving clockwise) Polished Brass, Polished Nickel, Satin Nickel.
• Hinge thickness is 0.059".
• Joint length means distance along hinge pin not including the ball tips.
• Photos to left show the 2-7/16" tall hinge with 6 screw holes per hinge. The 1-15/16" hinge has 4 screw holes per hinge.
• Matching flat head screws are included.
• PLEASE NOTE: These hinges have a loose pin. If the hinge is installed with the hinge pin in a vertical position, install the hinge so that the hinge pin can be pulled out from the top of the hinge rather than the bottom.

Finishes:

• Oil Rubbed Bronze
• Polished Brass
• Satin Nickel
• Polished Nickel

• Very good quality solid brass full mortise hinge
• Made for door thicknesses of 3/4" to 1-1/8".
• Measures 4-3/4" tip-to-tip.
• Each leaf measures 13/16" wide by 2-1/4" tall (measurement does not include hinge barrel).
• Hinge barrel is approximately 7/16" in diameter.
• One hinge leaf is swagged to provide a minimum gap when the door is closed.
• Matching wood screws are included.
• Made from solid brass material.
• Hinge shown in photo is the Antique Brass finish.

Finishes:

• Polished Brass
• Antique Brass