• Strap side of hinge measures 2-1/2" wide by 9" long by 5/8" thick cast aluminum
• Plate side of hinge measures 4-5/8" high by 2-3/4" wide by 3/8" thick
• Hinge swings on bronze bearings
• Each hinges uses 8 each #14 flat head screws (not included)
• For doors where the frame and door are flush with each other
• The hinges are rated at 200 lbs for a pair of hinges on a door up to 36" wide

Finishes:

• Polished aluminum
• Flat Black

• Strap side of hinge measures 3" wide and 5/32" thick and is made of plated steel
• Plate side of hinge measures 6-1/8" by 2-1/2" by 1/2" thick and is made of cast aluminum
• Hinge swings on bronze bearings
• For doors where the frame and the door are flush
• Plate side of hinge uses #14 flat head screws (not included)
• Strap side of hinge uses 3/8" bolts (not included)
• The 12", 18" and 24" dimensions are measured from the end of the strap to the pivot point of the strap

Weight Ratings are for two hinges per door

SKU 902002 and 902010 are rated at 250lbs for up to a 36" door and 200lbs for a 36" to 40" door

SKU 902004 and 902012 are rated at 300lbs for a 36" to 40" door and 250lbs for a 42" to 46" door

SKU 902006 and 902014 are rated at 300lbs for up to a 48" door

Finishes:

• Chrome plated, highly polished
• Black Coated

• Surface mounted hinge.
• Stainless steel pin.
• Made from high pressure zinc die cast base material.
• Highly polished chrome plated.
• Screws are not included but are offered for purchase during checkout.
• Weight rating for a pair of these hinges is approximately 100 lbs.
• SKU # 818002 uses 6 each #8 flat head screws and 8 each #10 flat head screws per pair of hinges.
• SKU # 818004 and SKU # 818006 use 14 each #8 flat head screws per pair of hinges.

Finishes:

• Polished chrome

• Surface mounted refrigerator hinge, available in two offset models and a flush model. Classic styled refrigerator hinge for smaller service doors.
• The offset measurement is the distance between the surface of the door and the surface that the door is mounted to.
• Made from high pressure die cast zinc chromate with a stainless steel pin.
• Hinge measures approximately 4-1/4" wide by 3-1/16" tall. Click on link below for dimensional diagram.
• Sold by the pair. A pair is two complete hinges.
• Screws are not included but are offered for purchase during checkout. Uses #8 flat head screws. Order 12 screws per pair of hinges.

Finishes:

• Polished Chrome

• Refrigerator Latch matches our die cast refrigerator hinges.
• Non-handed, works on both left hand opening or right hand opening doors.
• May be locked using a padlock (padlock not included with latch).
• Handle is high pressure zinc die cast base material, latching mechanism is steel.
• Highly polished chrome plated.
• Available in either an "Offset" model or a "Flush" model.
• The "Offset" model (SKU 818000) has a strike that accepts variable offsets from 3/4" to 1-1/4".
• The "Flush" model (SKU 818003) has a strike that accepts variable offsets from flush to 3/8".
• Handle is 6" long. Handle mounting plate measures 2-1/8" wide by 2-5/16" long. Handle projects 2-1/8". Handle width is 1-1/8".
• Strike mounting plate dimensions for the Offset model (SKU 818000) measures 2-3/32" by 1-1/32". Strike projection is 1-13/16".
• Strike mounting plate dimensions for theFlush model (SKU 818003) measures 2-1/16" by 1-3/32". Strike projection is 1-1/32".
• Each latch uses 6 each #8 flat head screws (not included but offered for purchase during checkout).

Finishes:

• Polished Chrome

• For flush mounted, 180 degree opening doors.
• Overall length is 3-1/2".
• Solid brass.
• #5 x 1/2" flat head screws are included.

Finishes:

• Polished Brass

• 3/8" offset for offset doors.
• Overall length is 4".
• Solid brass.
• #6 x 3/4" flat head screws are included.

Finishes:

• Polished Brass