Search
Categories
-
DOOR HINGES
-
CABINET HINGES
- Semi Concealed Cabinet Hi...
- European Hinges
- Blum Hinges
- Surface Mounted Cabinet H...
- Demountable Hinges
- Youngdale Hinges
- Overlay Hinges, Wrap Around
- Partial Inset Hinges
- Pivot Hinges for Cabinets
- Ball Tipped Butt Hinges
- Pivot Door Slides
- Flipper Door Slides
- Entertainment Center Cabi...
- Amerock Hinges
- Vertical Door Stays
- Soft Close Add-on Devices
- Cabinet Knobs & Pulls
- Cabinet Hardware
-
FURNITURE HINGES
-
GATE HINGES AND HARDWARE
- Gate Latches - Gate Locks
- Gate Strap Hinges
- Gate Tee Hinges
- Gate Pivot & Weld-On Hinges
- Bolt, Screw, Strap
- Pintle Hinges
- Swimming Pool Gate Hinges
- Swimming Pool Gate Latches
- Gate Spring Hinges
- Solid Bronze Gate Hardware
- Cane Bolts
- Gate Wheels - Gate Closers
- Gate Grills
- Gate Handles
- Gate Pulls -Gate Stops
-
SPECIALTY HINGES
- Heavy Duty Hinges
- Small Butt Hinges
- Soss Hinges
- Other Invisible Hinges
- Piano Hinges
- Continuous Hinges
- No Mortise Hinges
- Bi-Fold Door Hinge
- Strap Hinge
- Dummy Strap Hinges
- Tee Hinges
- Chest Hinges
- Box Hinges - Lid Supports
- Garage Door Hinges
- Folding Screen Hinges
- Refrigerator Hinges
- Ice Box Hinges
- Weld-on Hinges
- Welding Hinges
- Hatch Hinges and Hardware
- Shower Door Hinges
-
SHUTTER & WINDOW
-
STAINLESS STEEL HINGES & HARDWARE
Piano Hinge, Stainless Steel
Refine by Category:
 Stainless Steel With Holes (5) | Stainless Steel Without Holes (6) |
- Stainless steel base material (type 304 stainless).
- Screw holes measure 2 inches center to center. Knuckle length is 1/2".
- Natural finish.
- Stainless steel offers superior strength to other materials. A good choice for any use where corrosion can be a problem.
- Screws are not included, but are offered for purchase during checkout. A full length of piano hinge uses about 72 screws per length.
- IMPORTANT PLEASE READ THE FOLLOWING BEFORE ORDERING:
- REGARDING THE FINISH; this product is not a "decorative" product. It is a commercial grade product and as such will not have the finish of a beautifully finished interior grade stainless steel or the finish of a high polished marine grade product.
- REGARDING OUR CUTTING SERVICE;
- The first cut on each piece of hinge is free.
- Each additional cut is $6.00 (limit 5 cuts per hinge). This is expensive because stainless steel is tough and eats up expensive cutting blades fast.
- We will ship the remaining parts of any hinge that has been cut.
- Our cutting blade is approximately 1/16" thick so there is some loss of material with every cut made. For example, a hinge with 5 cuts made will lose 5/16" of material.
- The hinge knuckles on this product are spaced at 1/2" intervals. Please keep this in mind when sizing your cuts. It is best toask for a cutata joint or in the middle ofa knuckle. That means that it is really best to ask for cuts that are sized to a whole inch, a 1/2 inchor a 1/4 inch (for example 12" or 12-1/2" or 12-1/4").
- Hinge thathas beencut for youis absolutely not returnable and the order may not be canceled if it has already been cut. In order to meet our promise of "next working day shipping" we are sometimes cutting your hinge within 30 minutes after your order has been placed. If you need to change your order we need to hear from you within 30 minutes of the time the order has been placed. No changes or cancellations may be made after 30 minutes on any hinge cutting order.
- ACCURACY; we can only promise cutting accuracy to plus or minus 1/8".
- REGARDING SHIPPING;
- Piano hinge that is 52" or longer is considered "Oversize" by UPS. There is an additional $8.95 charge added to any piano hinge that is 52" or longer.
- You can save the $8.95 oversize shipping charge by having your hinge cut to a size below 52". If you order more than one hinge there is only one $8.95 charge per order.
- Stainless steel base material (type 304 stainless).
- Hinge is blank, there are no screw holes. Knuckle length is 1/2".
- Natural finish.
- Stainless steel offers superior strength to other materials. A good choice for any use where corrosion can be a problem.
- IMPORTANT PLEASE READ THE FOLLOWING BEFORE ORDERING:
- REGARDING THE FINISH; this product is not a "decorative" product. It is a commercial grade product and as such will not have the finish of a beautifully finished interior grade stainless steel or the finish of a high polished marine grade product.
- REGARDING OUR CUTTING SERVICE;
- The first cut on each piece of hinge is free.
- Each additional cut is $6.00 (limit 5 cuts per hinge). This is expensive because stainless steel is tough and eats up expensive cutting blades fast.
- We will ship the remaining parts of any hinge that has been cut.
- Our cutting blade is approximately 1/16" thick so there is some loss of material with every cut made. For example, a hinge with 5 cuts made will lose 5/16" of material.
- The hinge knuckles on this product are spaced at 1/2" intervals. Please keep this in mind when sizing your cuts. It is best to ask for a cut at a joint or in the middle of a knuckle. That means that it is really best to ask for cuts that are sized to a whole inch, a 1/2 inch or a 1/4 inch (for example 12" or 12-1/2" or 12-1/4").
- Hinge that has been cut for you is absolutely not returnable and the order may not be canceled if it has already been cut. In order to meet our promise of "next working day shipping" we are sometimes cutting your hinge within 30 minutes after your order has been placed. If you need to change your order we need to hear from you within 30 minutes of the time the order has been placed. No changes or cancellations may be made after 30 minutes on any hinge cutting order.
- ACCURACY; we can only promise cutting accuracy to plus or minus 1/8".
- REGARDING SHIPPING;
- Piano hinge that is 52" or longer is considered "Oversize" by UPS. There is an additional $8.95 charge added to any piano hinge that is 52" or longer.
- You can save the $8.95 oversize shipping charge by having your hinge cut to a size below 52". If you order more than one hinge there is only one $8.95 charge per order.