No Mortise Hinges - Bi-Fold Door Hinge

No Mortise Hinges - Bi-Fold Door Hinge

  • Over 70 different non mortise hinges in this section
  •  No-mortise hinges offer easy installation.
  • They do not require mortising the door or frame
  • And they leave a very narrow gap between the door and frame

No-Mortise Hinges, Ball Tipped

No-Mortise Hinges, Ball Tipped
  • Ball tipped No Mortise Hinges
  • Made for 3/4" thick doors.
  • Available in 9 different finishes
Click here for Information & Pricing

3/4" Wrap Around Hinges-

3/4
  • For full inset doors where doors are 3/4" in thickness
  • Hinge leaf wraps around back of door for extra attachment strength
  • "No-mortise" type hinge does not require mortising the door or frame
  • These hinges work well for entertainment center doors with "articulated" doors
  • Door gap as small as 1/16" because of no-mortise style
  • Non-self closing
  • Hinge is 2-1/2" tall. From tip to tip it is 2-3/4"
  • Base material is steel
  • Screw holes are slotted for easy vertical and horizontal adjustment
  • Screws are included

Finishes:

  • Satin nickel
  • Dark Antique English
  • Burnished Brass
  • Antique English
  • Wrought Iron
  • Polished Brass
  • Oil Rubbed Bronze
Click here for Information & Pricing

Satin Nickel No Mortise Hinge

Satin Nickel No Mortise Hinge
  • For full inset doors where the door is 3/4" in thickness.
  • Hinge leaf wraps around back of door for extra attachment strength.
  • "No mortise" type hinge does not require mortising the door or frame (door gap will be 1/16").
  • Non self-closing hinge.
  • Hinge features decorative tips.
  • Hinge measures 2-1/2" tall. From tip to tip it is 2-3/4" tall .
  • Base material is steel.
  • Screw holes are elongated for vertical and horizontal adjustment.
  • Hinges are sold by the "Each". You would normally order 2 hinges per door.
  • Each hinge uses 6 each #6 flat head screws. Not included but offered for purchase during checkout.
Click here for Information & Pricing

4 Inch Finial Tipped No-Mortise Hinge

4 Inch Finial Tipped No-Mortise Hinge
  • Beautiful high quality No-mortise style hinge with finial tips.
  • Available in two finishes:
    • Satin Nickel (shown in photo)
    • Polished Nickel
  • Made for 3/4" thick doors.
  • The door hinge leaf has a 7/8" by 2-3/4" wrap around for extra holding power.
  • Hinge measures 4" tall tip-to-tip and approximately 1-3/8" wide.
  • Made from steel base material.
  • Uses #6flat head screws (not included but offered for purchase during checkout. Order 6 screws per hinge. Order the "Bright Nickel" finish screws for both of these hinges. Satin Nickel screws do not exist in this size.
  • This hinge is sold by the each. You would normally order 2 or 3 hinges per door.
Click here for Information & Pricing

No-Mortise Hinges With Finial Tip

No-Mortise Hinges With Finial Tip
  • Hinge requires no mortising to install.
  • Leaves only a 1/16" gap.
  • Tight pins with decorative finial tip.
  • Steel base material.
  • Joint length means distance along hinge pin. Does not include finials.
  • The "Width Closed" dimension means the width of the hinge leaf (as shown in the photo, above), not including the hinge barrel.
  • SKU 816561 includes screws.
  • Use flat head screws (not included but offered for purchase during checkout).
  • For the #4 screw order SKU 286253.
  • For the #5 screw order SKU 286254.
  • This hinge is sold by the each, except for SKU 816561 which is sold by the pair (2 hinges).

Finishes:

  • Light Antique Brass
  • Bronze plated
Click here for Information & Pricing

No-Mortise Hinge with Finial Tips, Bronze

No-Mortise Hinge with Finial Tips, Bronze
  • Steel base material.
  • 2" tall (not including tips).
  • 7/8" wide.
  • Fits door thicknesses of 5/8" to 3/4".
  • Screws are included.
  • requires no mortising to install and leaves only a 1/16" gap.

Finishes:

  • Bronze plated
Click here for Information & Pricing

No-Mortise Hinge, Solid Brass with Ball Tips

No-Mortise Hinge, Solid Brass with Ball Tips
  • Beautiful no-mortise style hinges are made from solid brass base material.
  • No-mortise hinges allow you to hang a door without mortising into the door edge or cabinet frame, leaving only a small gap between the two.
  • Hinge leaf is 2-1/2" tall by 23/32" wide.
  • Thickness of leaf is 3/32".
  • Made to fit a 3/4" thick door.
  • Tip-to-tip dimension is 3-1/8".
  • Decorative ball tips.
  • Matching wood screws are included.
  • Hinge shown in image is Polished Brass Finish. To see other finishes click on link below.
  • These hinges are sold by the pair. A pair is two hinges, what you normally need to hang one door.

Finishes:

  • Polished Brass
  • Bronze
  • Oil Rubbed Bronze
  • Satin Brass
  • Polished Nickel
  • Satin Nickel
  • Antique Brass
Click here for Information & Pricing

No Mortise Hinge, Solid Brass, Plain Ends

No Mortise Hinge, Solid Brass, Plain Ends
  • Beautiful no-mortise style hinges are made from solid brass base material.
  • No-mortise hinges allow you to hang a door without mortising into the door edge or cabinet frame, leaving only a small gap between the two.
  • Hinge leaf is 2-1/2" tall by 23/32" wide.
  • Thickness of leaf is 3/32".
  • Made to fit a 3/4" thick door.
  • Plain ends, no decorative tips.
  • Matching wood screws are included.
  • Hinge shown in image isSatin Brass Finish. To see other finishes click on link below.
  • These hinges are sold by the pair. A pair is two hinges, what you normally need to hang one door.

Finishes:

  • Polished Brass
  • Bronze
  • Oil Rubbed Bronze
  • Satin Brass
  • Polished Nickel
  • Satin Nickel
  • Antique Brass
Click here for Information & Pricing

No Mortise Hinge, Solid Brass, Steeple Tips

No Mortise Hinge, Solid Brass, Steeple Tips
  • Beautiful no-mortise style hinges are made from solid brass base material.
  • No-mortise hinges allow you to hang a door without mortising into the door edge or cabinet frame, leaving only a small gap between the two.
  • Hinge leaf is 2-1/2" tall by 23/32" wide.
  • Thickness of leaf is 3/32".
  • Made to fit a 3/4" thick door.
  • Tip-to-tip dimension is 3-5/8".
  • Decorativesteeple tips.
  • Matching wood screws are included.
  • Hinge shown in image isSatin NickelFinish. To see other finishes click on link below.
  • These hinges are sold by the pair. A pair is two hinges, what you normally need to hang one door.

Finishes:

  • Polished Brass
  • Bronze
  • Oil Rubbed Bronze
  • Satin Brass
  • Polished Nickel
  • Satin Nickel
  • Antique Brass
Click here for Information & Pricing

No Mortise Hinge

No Mortise Hinge
  • Beautiful no mortise style hinge.
  • Made to fit a 3/4" to 7/8" door.
  • Requires no mortising to install and leaves only a 1/16" gap.
  • 3-1/8" tip-to-tip measurement.
  • 2-1/2" tall not including tips.
  • Width of hinge is 1".
  • PLEASE NOTE: Hinges listed below are made from either steel or brass base material. Please note material listed with SKU number before ordering.
  • Matching wood screws are included.

Finishes:

  • Antique Brass
  • Polished Nickel
  • Weathered Copper
  • Antique Nickel
  • Satin Nickel
  • Oil Rubbed Bronze
  • Polished Brass
  • Polished Chrome
Click here for Information & Pricing

Steeple Tipped No-Mortise Hinges

Steeple Tipped No-Mortise Hinges
  • Beautiful solid brass hinges require no mortising to install.
  • Tight pins with a decorative finial tip (steeple tip).
  • Installs with only a 1/16" gap between door and door frame.
  • Uses #5 x 5/8 inch flat head screws. (Screws are included).
  • Made from solid brass base material.
  • Hinge is made for 3/4" thick door.
  • Tip-to-tip measurement is 2-7/8".
  • The large leaf measures 3/4" by 2" (not including the barrel).
  • The barrel measures 1/4".
  • Available in 13 different finishes. Click on link to view finish chart.
  • PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

  • Gloss Oil Rubbed Bronze
  • Black Nickel
  • Flat Black
  • Oil Rubbed Bronze
  • Antique Copper
  • Antique Nickel
  • Polished Chrome
  • Satin Nickel, Matt
  • Polished Nickel
  • Iron/Pewter
  • Venetian Bronze
Click here for Information & Pricing

Ball Tipped No-Mortise Hinges

Ball Tipped No-Mortise Hinges
  • Beautiful solid brass hinges require no mortising to install.
  • Tight pin with a decorative ball tip.
  • Installs with only a 1/16" gap between door and door frame.
  • Uses #5 x 5/8 inch flat head screws. (Screws are included).
  • Made from solid brass base material.
  • Hinge is made for 3/4" to 7/8" thick door.
  • Tip-to-tip measurement is 2-5/8".
  • The large leaf measures 11/16" by 2" (not including the barrel).
  • The barrel measures 1/4".
  • Available in 10 different finishes. Click on link to view finish chart.
  • PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

  • Satin Nickel, Matt (similiar to Stainless Steel finish)
  • Oil Rubbed Bronze
  • Polished Nickel
  • Old Copper
  • Flat Black
  • Polished Brass
  • Iron/Pewter
  • Venetian Bronze
  • Gloss Oil Rubbed Bronze
  • Polished Chrome
Click here for Information & Pricing

No-Mortise Hinges-

No-Mortise Hinges-
  • Requires no mortising to install.
  • Leaves only a 1/16" gap.
  • Tight pins.
  • Finish is a dark statuary bronze.
  • Steel base material.
  • Uses flat head screws (not included but offered for purchase during checkout).
  • For the #4 Flat Head Bronze finish screw use our SKU #286253.
  • For the #5 Flat Head Bronze finish screw use our SKU #286254.
  • PLEASE NOTE; screw hole patterns will vary slightly from those in the photo depending on size.
  • The "Leaf Width" dimension listed below is the distance from the edge of the hinge leaf to the edge of the hinge barrel. Joint length is the distance along the hinge pin or hinge pin barrel.

Finishes:

  • Statuary bronze
Click here for Information & Pricing

Steel No-Mortise Hinges

Steel No-Mortise Hinges
  • No mortise hinges made from steel.
  • Because the base material is steel rather than brass these hinges are available at a very low price.
  • Available in 8 different finishes.
    • Oil Rubbed Bronze
    • Chrome plated
    • Brass plated
    • Satin Chrome
    • Antique Brass
    • Matt Black
    • Pewter
    • Satin Nickel
Click here for Information & Pricing

No-Mortise Hinge, Satin Brass

No-Mortise Hinge, Satin Brass
  • The advantage of a "no-mortise" hinge is that because the one leaf is set inside the other installation of the hinge leaves only a small gap between the door and frame .
  • For connecting doors, panels, or screens.
  • No-mortise hinges are a good choice for bi-fold doors.
  • This hinge will leave only a 1/16" gap between the door and frame or in the case of bi-fold doors between the two doors.
  • Made from steel base material.
  • Uses #5 x 3/4" flat head screws which are included.

Finishes:

  • Satin brass
Click here for Information & Pricing

Non-Mortise Hinge

Non-Mortise Hinge
  • No-mortise (also known as a non-mortise hinge) hinge, great for use on interior shutters, bi-fold doors, cabinets or screens.
  • Installs like a full mortise butt hinge however no mortising (cutting of door edge or frame edge) is required. Leaves only a 1/16" gap between door and frame.
  • Hinge measures 3" tall by 1-1/4" wide.
  • Fits door thicknesses from 7/8" to 1-1/4".
  • Made from steel base material and available in5 different finishes.
  • Hinge pin is removable.
  • Uses #6 flat head screws. Screws are not included but are offered for purchase during checkout.

Finishes:

  • Brass Plated
  • White
  • Antique Brass
  • Brushed Chrome
  • Bright Nickel
Click here for Information & Pricing

3 Inch No Mortise Hinge, with Wrap-Around Leaf

3 Inch No Mortise Hinge, with Wrap-Around Leaf
  • No-mortise hinge for overlay doors.
  • Made to fitdoor thickness of 1" to 1-1/16".
  • Hinge pin is removable. Small hinge leaf may be flipped over so that the hinge can be used for either a left hand or right hand opening door.
  • Hinge measures 2-1/2" tall by 2-1/2" wide as measured in the open position and not including the bend in the larger leaf.
  • The bend in the larger leaf measures 7/8".
  • Made from steel base material.
  • Uses #6 flat head screws. Not included but offered for purchase during checkout. Each hinge uses up to 7 screws per hinge depending on how it is installed.

Finishes:

  • White
  • Bright Nickel
Click here for Information & Pricing

No Mortise Lid Hinge

No Mortise Lid Hinge
  • For lift lids on stereos, toy chests, piano benches, etc.
  • Steel base material
  • Hinge measures 2" tall along hinge pin. Lid leaf measures 1-5/8" by 1"
  • Opens approximately 195 degrees
  • In the "Size" column below the size refers to the thickness of the back wall of the box.
  • For the bronze model order our SKU #286253 (#4 x 5/8") bronze screws. Screws are not included but are offered for purchase during checkout.
  • For the brass model use #4 flat head brass screws. Screws are not included but are offered for purchase during checkout.

Finishes:

  • Bronze
  • Brass plated
Click here for Information & Pricing

No-Mortise Hinge, 3-1/2", Satin Chrome

No-Mortise Hinge, 3-1/2
  • Steel base material.
  • 3-1/2" tall by 1-1/4" wide (in closed position).
  • Fast pin.
  • Nylon spacers.
  • Screws are included.
  • Fits door thickness of 1" to 1-1/4".

Finishes:

  • Satin Chrome plated
Click here for Information & Pricing

No-Mortise Hinge, Flag Style

No-Mortise Hinge, Flag Style
  • No Mortise hinge for bi-fold doors.
  • Please Note: These hinges are used on bi-fold doors which are supported by a track installed above the doors and a pivot in the top of the door. These hinges are not strong enough to support doors by themselves. Do not use these hinges without a "track and pivot" type installation.
  • Available in two sizes:
    • SKU 264002 is approximately 2" tall
    • SKU 264000 is approximately 3" tall
    • SKU 264000 has a fixed hinge pin
    • SKU 264002 has a loose pin, the top leaf may be lifted off of the bottom leaf (allows door to be removed after installation).
  • Leaves only a 1/16" gap between the door and frame or between doors.
  • Steel base material.
  • Wood screws are included.
  • PLEASE NOTE; the screw hole pattern shown in the photo does not represent the actual screw hole pattern of the hinge.
  • Sold by the pair. A pair means two hinges. The photo to the left is one hinge or 1/2 pair.

Finishes:

  • Satin Brass
Click here for Information & Pricing

Stainless Steel Lift off No Mortise Hinges

Stainless Steel Lift off  No Mortise Hinges
  • No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
  • Leaves only a 1/8" gap after installation.
  • Top leaf rides on a ball bearing located on the top of the hinge pin.
  • Hinge is not handed, may be used on left or right opening doors.
  • Hinge shown in photo is shown in the "door open" position.
  • Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
  • Made from solid type 304 stainless steel.
  • Available in two sizes, a 4" high hinge and a 5" high hinge.
  • The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
  • The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
  • Weight ratings listed below are for a pair of hinges.
  • Stainless steel flat head screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

No Mortise Hinges, Builders Series

No Mortise Hinges, Builders Series
  • Builders Series No-Mortise Hinge
  • This hinge does not require mortising of the door or the frame (a mortise is a cut-out that the hinge fits into). After installation, the hinge leaves an approximate 3/32" gap between the door and frame.
  • Builders Series Hinges, while not the highest quality hinge available, offer a very good value.
  • Hinge pins are removeable.
  • Hinge is available in three sizes.
    • Small: 2-1/2" tall by 1-1/4" wide, made for door thicknesses of 11/16' to 7/8".
    • Medium: 3" tall by 1-1/2" wide, made for door thicknesses of 1" to 1-1/8".
    • Large: 3-1/2" tall by 1-3/4" wide, made for door thicknesses of 1-1/8" to 1-3/8".
  • Wood screws are included.
  • Made from steel and brass plated.
  • Sold by the pair. A pair is two complete hinges.
Click here for Information & Pricing

No Mortise Style Stainless Steel Spring Hinge

No Mortise Style Stainless Steel Spring Hinge
  • No mortise style spring hinge.
  • No mortise hinges require no cutting or mortising of the door or door frame.
  • After installation, this hinge leaves only a 1/8" gap between the door and frame.
  • Hinge is not handed, it will work on both right hand and left hand swinging doors.
  • Hinge is made for 1-3/4" thick doors.
  • Dimensions:
    • Height is 4"
    • Width of hinge leaf is 1-7/8"
    • Click on link below for more complete dimension diagram.
  • Made from stainless steel with a dull or satin finish.
  • Stainless steel wood screws are included.
  • PLEASE NOTE: the internal spring on this hinge is made from steel. It is not stainless. It will have a shortened or limited life in a marine or corrosive environment.
Click here for Information & Pricing

No-Mortise Hinge for 1-3/8 Inch Door

No-Mortise Hinge for 1-3/8 Inch Door

  • Large (4" tall) ball bearing no-mortise hinge (also known as non-mortise hinge).
  • This hinge does not require mortising of the door or the frame.
  • Made for doors that are 1-3/8" thick.
  • After installation there will be only a 3/32" gap between the door and frame.
  • Available in all stainless or oil rubbed bronze over steel.
Click here for Information & Pricing

No-Mortise Hinge for 1-3/4 Inch Door, Stainless Steel

No-Mortise Hinge for 1-3/4 Inch Door, Stainless Steel
  • Large (4" tall) ball bearing no-mortise hinge (also known as non-mortise hinge).
  • This hinge does not require mortising of the door or the frame (A mortise is a cut-out that the hinge fits into).
  • Made for doors that are 1-3/4" thick.
  • After installation there will be only a 3/32" gap between the door and frame.
  • Hinge is 4" tall. Thickness of hinge is 3/32".
  • The base material of the stainless steel hinge is stainless steel.
  • The ball bearings are made of stainless steel.
  • Hinge pin is removable. There is a small hole in the bottom hinge pin cap. The hinge pin can be removed by using tapping out with a pin punch and hammer.
  • Each hinge uses 8 each #10 screws. Screws are included with hinge.
  • These hinges are sold by the "Each". You would normally order 2 or 3 hinges per door.

IMPORTANT HANDING INFORMATION: This hinge is "handed". There is a "Left Hand" model and a "Right Hand" model. Please see the links below before ordering so that you will get the correct hinge for your door.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

No-Mortise Hinge for 1-3/4 Inch Door, Oil Rubbed Bronze

No-Mortise Hinge for 1-3/4 Inch Door, Oil Rubbed Bronze
  • Large (4" tall) ball bearing no-mortise hinge (also known as non-mortise hinge).
  • This hinge does not require mortising of the door or the frame (A mortise is a cut-out that the hinge fits into).
  • Made for doors that are 1-3/4" thick.
  • After installation there will be only a 3/32" gap between the door and frame.
  • Hinge is 4" tall. Thickness of hinge is 3/32".
  • Base material is steel.
  • The ball bearings are made of stainless steel.
  • Each hinge uses 8 each #10 screws. Screws are included with hinge.
  • These hinges are sold by the "Each". You would normally order 2 or 3 hinges per door.

Finish:

  • Oil Rubbed Bronze
Click here for Information & Pricing

Locking Bi-Fold Door Hinge

Locking Bi-Fold Door Hinge
  • This hinge locks in open and closed position (and also at 30 degrees)
  • It is good for bi-fold doors because it automatically locks flat in the open position
  • The door will remain straight and can engage magnetic catches
  • Size of hinge is 2-3/8" tall and 2-9/16" wide
  • Uses #6 oval head screws (8 per hinge, not included, but offered for purchase during checkout). Our SKU 400993 is a good match for this finish.
  • Click on links below for more information on hinge
  • Die cast metal base material
  • For doors with a minimum stile width of 1-1/8"

    Finishes:
  • Dark Brown Powder Coat
Click here for Information & Pricing

Johnson Hardware Bi-Fold Door Hinge

Johnson Hardware Bi-Fold Door Hinge
  • Hinge replaces bi-fold door hinges made by Johnson Hardware.
  • Hinge measures 2-1/8" tall by 1-1/2" wide. Vertical screwhole spacing is 1-1/2" center to center. Legs on back of hinge project 1/2".
  • Made from steel base material.
  • Sheet metal screws are included.

Finishes:

  • Yellow zinc chromate
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com