Heavy Duty Door Hinges

Heavy Duty Door Hinges

  • Heavy Duty Hinges for Doors
  • Ball bearing butt hinges
  • Wide Throw Hinges
  • Heavy Duty Strap Hinges
  • Heavy Duty Floor Hinges
  • Heavy Duty Concealed Hinges

Heavy Duty Butt Hinge, Solid Brass, 6" x 6", Ball Bearing

Heavy Duty Butt Hinge, Solid Brass, 6
  • Beautiful solid brass heavy duty ball bearing butt hinges.
  • Heavy duty butt hinge made for heavy doors and gates.
  • Hinge is designed to be installed as a full mortise hinge.
  • Hinge measures 6 inches tall by 6 inches wide in the open position (as shown in photo).
  • Made from extra thick solid brassmaterial. Thickness ofbrass is 0.205".
  • Hinge features 4 ball bearings (maintenance free bearings).
  • Each hinges uses 10 each #14 x 1-1/2" wood screws (included).
  • Hinge is capable of holding up to a 600 lb. door (depending on width of door and number of hinges used, see info below).
  • Hinge fits door thicknesses of 2" to 2-3/4".
    • Weight Rating for Hinge
      • For door width up to 3 feet: 600 lbs.
      • For door width 3 feet to 3.5 feet: 500 lbs.
      • For door width 3.5 feet to 4 feet: 400 lbs.
    • Number of Hinges per Door
      • Up to 5 feet high, use 2 hinges
      • From 5 feet high to 7.5 feet high, use 3 hinges
      • From 7.5 feet high to 10 feet high, use 4 hinges
      • From 10 feet high to 12.5 feet high, use 5 hinges
      • From 12.5 feet high to 15 feet high, use 6 hinges
  • PLEASE NOTE: weight ratings given are a general guide for doors used in residential (low frequency) use under normal situations. The weight, width and number of hinges on the door are the major factors that affect hinge selection. When selecting hinges for your door keep in mind that other factors such as abuse, impacts, hostile atmospheres and other similar conditions can affect the choice of hinges.
  • ADVISORY: These solid brass ball bearing hinges contain ball bearings and the bearing raceway (madeof steel)that will eventually rust if subjected to harsh weather conditions (especially marine weather and salt air conditions).
  • Optional Ball Tips are available for these hinges in matching finishes. They are offered for purchase during checkout.

HALF PAIRS. Please note the UNIT when ordering hinges. We sell the hinges depending on how the manufacturer sells them to us. In this section if a hinge is sold by the PAIR you may order by the half pair. For example if you want 3 hinges order 1.5 pair when you check out.

Available Finishes

  • Polished Brass
  • Oil Rubbed Bronze
  • Satin Chrome
Click here for Information & Pricing

Heavy Duty Butt Hinge, Steel, 6" x 6", Ball Bearing

Heavy Duty Butt Hinge, Steel, 6
  • Heavy duty butt hinge made for heavy doors and gates.
  • Hinge is designed to be installed as a full mortise hinge.
  • Hinge measures 6 inches tall by 6 inches wide in the open position (as shown in photo).
  • Made from extra thick steel material. Thickness of steel is 0.203".
  • Hinge features 4 ball bearings (maintenance free bearings).
  • Each hinges uses 10 each #14 wood screws (included).
  • Hinge is capable of holding up to a 600 lb. door (depending on width of door and number of hinges used, see info below).
  • Hinge fits door thicknesses of 2" to 2-3/4".
    • Weight Rating for Hinge
      • For door width up to 3 feet: 600 lbs.
      • For door width 3 feet to 3.5 feet: 500 lbs.
      • For door width 3.5 feet to 4 feet: 400 lbs.
    • Number of Hinges per Door
      • Up to 5 feet high, use 2 hinges
      • From 5 feet high to 7.5 feet high, use 3 hinges
      • From 7.5 feet high to 10 feet high, use 4 hinges
      • From 10 feet high to 12.5 feet high, use 5 hinges
      • From 12.5 feet high to 15 feet high, use 6 hinges
  • PLEASE NOTE: weight ratings given are a general guide for doors used in residential (low frequency) use under normal situations. The weight, width and number of hinges on the door are the major factors that affect hinge selection. When selecting hinges for your door keep in mind that other factors such as abuse, impacts, hostile atmospheres and other similar conditions can affect the choice of hinges.

Available Finishes

  • Primed for Painting
  • Oil Rubbed Bronze
  • Satin Chrome
Click here for Information & Pricing

Heavy Duty Butt Hinge, Steel, 8" x 8", Ball Bearing

Heavy Duty Butt Hinge, Steel, 8
  • Heavy duty butt hinge (8 inches by 8 inches) made for heavy doors and gates.
  • Hinge is designed to be installed as a full mortise hinge.
  • Hinge measures 8 inches tall by 8 inches wide in the open position (as shown in photo).
  • Made from extra thick steel material. Thickness of steel is 0.200".
  • Hinge features 4 ball bearings (maintenance free bearings).
  • Each hinges uses 16 each #14 wood screws (included).
  • Hinge is capable of holding up to an 800lb. door (depending on width of door and number of hinges used, see info below).
  • Hinge fits door thicknesses of 2-1/4" to 3".
    • Weight Rating for Hinge
      • For door width up to 3 feet: 800 lbs.
      • For door width 3 feet to 3.5 feet: 670 lbs.
      • For door width 3.5 feet to 4 feet: 600 lbs.
    • Number of Hinges per Door
      • Up to 5 feet high, use 2 hinges
      • From 5 feet high to 7.5 feet high, use 3 hinges
      • From 7.5 feet high to 10 feet high, use 4 hinges
      • From 10 feet high to 12.5 feet high, use 5 hinges
      • From 12.5 feet high to 15 feet high, use 6 hinges
  • PLEASE NOTE: weight ratings given are a general guide for doors used in residential (low frequency) use under normal situations. The weight of the door, the width of the door and the number of hinges on the door are the major factors that affect hinge selection. When selecting hinges for your door keep in mind that other factors such as abuse, impacts, hostile atmospheres and other similar conditions can affect the choice of hinges.

Available Finishes

  • Primed for Painting
  • Oil Rubbed Bronze
  • Satin Chrome
Click here for Information & Pricing

Stainless Steel Wide Throw Butt Hinges

Stainless Steel Wide Throw Butt Hinges
  • A wide throw hinge sets the pivot point out away from the door allowing the door to open 180 degrees (depending on obstructions in the swing path of the door).
  • Wide throw hinges can be used when a door is set in a wide door jamb.
  • Stainless steel base material. Good for use outdoors, on sea coasts or any where the look of satin stainless steel is desired.
  • Designed for full mortise installation.
  • Wood screws are included.

Finishes:

  • 630 (US32D) Satin Stainless Steel
Click here for Information & Pricing

Wide Throw Butt Hinge, Steel

Wide Throw Butt Hinge,  Steel
  • The wide throw hinge sets the pivot point out away from the door allowing the door to open 180 degrees (depending on obstructions)
  • Wide throw hinges are normally used when doors are set in a wide jamb
  • Steel base material, full mortise hinges.
  • For medium weight doors of low frequency
  • Hinges come with wood screws and machine screws
  • Photo to left shows the antique bronze finish.

Finishes:

  • 632 (US3) Bright Brass Plated
  • US10D Antique Bronze Plated, Oiled
  • 652 (US26D) Satin Chrome Plated
Click here for Information & Pricing

Roton Continuous Geared Hinge

Roton Continuous Geared Hinge
  • Continuous geared hinges by Roton.
  • Roton hinges are a superior type of heavy duty continuous or heavy duty piano hinge. The hinge has a continuous gear that distributes the weight of the door evenly over the entire length of the hinge, rather than concentrate it on one or two small hinge pins.
  • Available in Full Surface, Half Surface or Full Mortise hinges.
  • Available in two lengths: 83 inches and 95 Inches
  • Available in two finishes: Aluminum or Bronze
Click here for Information & Pricing

Swing Clear Butt Hinge, Ball Bearing

Swing Clear Butt Hinge, Ball Bearing
  • Swing clear hinge with ball bearings.
  • Use swing clear hinges wherever doors are required to swing completely clear of the door opening. (door must open to at least 95 degrees to swing completely clear).
  • This hinge is made to fit doors that are 1-3/4" thick.
  • Improves clearance for wheelchairs, carts, etc.
  • Steel base material, full mortise hinge.
  • Hinge comes complete with matching wood screws.
  • Hinge is reversible for left or right swinging doors. To reverse the hinge; tap out the hinge pin, tap out the bottom plug, flip the hinge over and reassemble the bottom plug and hinge pin.
  • Photo above shows the Bronze finish.

Finishes:

  • Prime Coated
  • Satin Chrome Plated
  • Bronze Plated
Click here for Information & Pricing

Reinforcing Surface Mounted Pivot Hinge

Reinforcing Surface Mounted Pivot Hinge
  • Full surface reinforcing hinges can be added to doors troubled by sagging.
  • For medium and heavy weight doors subject to high frequency and abuse.
  • Provides increased reinforcement at the top corner of the door and jamb where stress can occur.
  • Available in two sizes; 4 inch and 4-1/2 inch. The 4 inch size is for doors with existing 4 x 4 inch hinges. The 4-1/2 inch size is for doors with existing 4-1/2 x 4-1/2 inch hinges. It is important that these hinges match your existing hinges so that the pivot points are aligned.
  • PLEASE NOTE: Hinges are handed (Left Hand and Right Hand). See installation chart at link below to assure you order the correct hand hinges.
  • Order one hinge per door. Hinge is installed as a reinforcing hinge on the top part of the door.
  • Included with each hinge: 9 wood screws for wood frame and wood door, 9 jack nuts and short machine screws for hollow metal doors, friction wrench for jack nut installation, paper installation template, instructions. Also included are 4 grommet nuts for through-bolting if necessary and a spacer plate for the hinge leaf that attaches to the door.
  • Made from steel base material.
Click here for Information & Pricing

Soss Heavy Duty Concealed Hinges

Soss Heavy Duty Concealed Hinges
  • For 1-3/4" and 2" door thicknesses.
  • Hinge is completely concealed when door is closed.
  • Hinge opens a maximum of 180 degrees.
  • Made from high strength plated steel and heavy duty zinc alloy castings.
  • For full size doors.
  • Reinforced nylon at wear points for long life.
  • Matching screws are included.
  • Hinge shown in photo is SKU 900028.
  • PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.

Finishes:

  • Satin Brass
  • Satin Chrome
  • Black Epoxy
Click here for Information & Pricing

Heavy Duty Spring Hinges, 4-1/2 Inch, Full Mortise

Heavy Duty Spring Hinges, 4-1/2 Inch, Full Mortise
  • Large heavy duty spring hinges. Full mortise template hinges.
  • Hinges measure 4-1/2" high by 4-1/2" wide (in open position as shown in photo).
  • Using 3 hinges per door they will work on a maximum door weight of 150 lbs.
  • Hinges are not handed. They will work on both right hand and left hand doors.
  • Made from steel base material.
  • Easily adjusted spring tension. Click on link below for instructions.
  • Screw hole pattern conforms to ANSI specifications for template hinges. Screw hole spacing matches Architectural grade hinge template for 4-1/2" hinges.
  • Pivot point aligns with non-spring hinges of the same size.
  • Hinges with a SKU number that begins with 760 are "Made in America", made in USA hinges.
  • Screws are included.

PLEASE NOTE: Any of the hinges listed below with an SKU number that starts with 760 is a U.L. listed Grade 1 hinge and may be used on a fire door. A minimum of two hinges per door is required for a fire door.

PLEASE NOTE BEFORE ORDERING, SEE THE "UNIT" COLUMN BELOW

  • Some hinges are sold by the "Each". Each means one hinge (order 2 or 3 hinges per door).
  • Some hinges are sold by the "Pair". A pair is 2 hinges. Hinges on this page may be ordered by the "Half Pair". To place an order for 1-1/2 pair (3 hinges), enter 1.5 in the order quantity.
Click here for Information & Pricing

Single Acting Spring Hinge

Single Acting Spring Hinge
  • Non -template hinge, for wood doors
  • Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
  • Large diameter barrel matches older style single acting pivot hinges
  • Steel base material
  • The 6" and 7" size come with machine screws
  • The "Size" dimension is the height of the plate that mounts on the door and jamb
  • The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.
  • The 7" hinge maximum door weight is 130lbs using 2 hinges and 175lbs using 3 hinges.

Finishes:

  • 601 (US1B) Bright Black Japanned
  • 600 (USP) Primed for Painting.
Click here for Information & Pricing

Heavy Duty Double Acting Spring Hinges

Heavy Duty Double Acting Spring Hinges
  • American made product.
  • Double acting hinges for larger doors.
  • Double acting spring hinges allow the door to open 180 degrees in either direction and spring action returns door to center closed position.
  • Saloon Door Hinges is another name for these hinges.
  • Spring tension is adjustable.
  • The satin brass finish is the most popular finish. The photo above shows the zinc chromate finish.
  • The manufacturer recommends using three hinges per door for heavier doors. Two hinges may be used for lighter doors. Click on the link below for more specific information. If three hinges are used the center hinge should be installed as close as possible to the top hinge for maximum support.
  • The door may be mortised for these hinges so that there is no gap between the door and the door frame. If you elect not to mortise then the following door gaps apply: 6" size-.325" gap; 7" size-.352" gap; 8" size-.394" gap.
  • Steel base material.
  • All products on this page are made in the USA.
  • Complete with wood screws.
  • "Size" is the height of the plate that mounts on the door and jamb.
  • This is a high quality American made product offered at a very competitive price.
  • When shopping, please consider that many of our competitors are selling a cheap foreign made product at a cheap price.

*Maximum door weight (lbs.) using three spring hinges

Finishes:

  • 633(US4) Satin Brass.
  • 603(US2G) Zinc Chromate.
  • 640(US10B) Oil Rubbed Bronze.
  • 600(USP) Prime coated for painting.
Click here for Information & Pricing

Spring Pivots, Horizontal Type, Adjustable, Heavy Duty

Spring Pivots, Horizontal Type, Adjustable, Heavy Duty
  • Heavy duty pivot hinge for doors up to 150 lbs.
  • Double acting spring pivot is made for residential or low frequency doors.
  • Allows door to open 90 degrees in both directions.
  • Spring returns door to center or closed position.
  • Features a malleable iron and steel mechanism.
  • Features ball bearing pivot.
  • Trim pieces are made from steel.
  • Spring tension is adjustable.
  • Device is non-handed, works on both right hand and left hand doors.
  • Made for doors which are 1-3/8" and 1-3/4" thick.
  • Maximum door width is 36".
  • Maximum door weight is150 lbs.
  • Not recommended for restaurant kitchen doors.
  • Sold by the set. Order one set per door.
  • The manufacturer recommends that you use door stops at 90 degrees to prevent damage to the pivot.
  • Cover plates measure 9-7/8" by 2-5/8".
  • Comes complete with wood screws and all hardware necessary for installation.
  • Comes with Jamb bracket which allows pivot to be mounted either to door jamb or floor.
  • All products in this section are American Made Products.
    • PLEASE NOTE: this hinge does not have the "hold open" feature. The heavy duty pivot hinge is NOT available with the hold open feature. If you need the "hold open" feature, please order our Medium Duty Pivot Hinge (90 lb maximum door weight).

Finishes:

  • Primed for painting 600 (USP)
  • Bright brass plated steel 632 (US3)
  • Oil Rubbed Bronze 640 (US10B)
  • Satin nickel plated 646(US15)
Click here for Information & Pricing

Heavy Duty Bolt-On Hinges

Heavy Duty Bolt-On Hinges
  • Heavy duty hinge designed to "bolt-on" to the post and "bolt-on" to the gate frame.
  • Available in two sizes:
    • 7 inch high model
    • 9 inch high model
    • Click on links below for detailed information on dimensions
  • Hinge construction
    • Made from steel
    • Prime coated, ready for painting
    • Roller bearing construction
    • Includes grease fitting for lubrication
    • Click on link below for more information on how these hinges are constructed
  • Weight ratings
    • SKU 907012 (7 Inch Model) has a maximum weight rating of 1000 lbs per pair of hinges.
    • SKU 907008 (9 Inch Model) has a maximum weight rating of 3000 lbs per pair of hinges.
  • Fasteners
    • Fasteners are not included.
    • To acheive the above weight ratings, Grade 5 or better bolts must be used for attachment
    • We do not stock Grade 5 or better bolts, they must be purchased from an alternate source.
    • SKU 907012 (7 Inch Model) uses 1/2" diameter bolts.
    • SKU 907008 (9 Inch Model) uses 3/4" diameter bolts.
  • This hinge is sold by the "Each". You will normally need to order 2 or more hinges per gate or door that you are hanging.
Click here for Information & Pricing

Welding Hinges, Heavy Duty, Removable Pin

Welding Hinges, Heavy Duty, Removable Pin
  • Heavy duty blank weld-on hinges.
  • Hinge pin is removable.
  • Non-swagged heavy hinge is designed for surface application by welding on metal.
  • Made from cold rolled steel, not plated.
  • All sizes have 5 knuckles.
  • Weight rating applies to the use of 1, 2 or 3 hinges per hinged device. For example if the weight rating for one hinge is 40 lbs then the weight rating for 3 hinges is 120lbs. The weight ratings are do not apply to the use of more than 3 hinges.

Finishes:

  • Natural
Click here for Information & Pricing

Weld-On Hinges Heavy Duty

Weld-On Hinges Heavy Duty
  • heavy duty weld-on hinges
  • fast spun pin
  • for heavy duty applications
  • not swaged for mortising
  • no holes
  • hinge widths are approximately 1/8" less than nominal sizes shown
  • all sizes have five knuckles
Click here for Information & Pricing

Welding Hinges, Heavy Duty, Tight Pin

Welding Hinges, Heavy Duty, Tight Pin
  • Heavy duty blank weld-on hinges.
  • Fast-spun pin, non-removeable.
  • Non-swagged heavy hinge is designed for surface application by welding on metal.
  • Made from cold rolled steel, not plated.
  • All sizes have 5 knuckles.
  • Weight rating applies to the use of 1, 2 or 3 hinges per hinged device. For example if the weight rating for one hinge is 40 lbs then the weight rating for 3 hinges is 120lbs. The weight ratingsdo not apply to the use of more than 3 hinges.

Finishes:

  • Natural
Click here for Information & Pricing

Round Body Barrel Weld-On Hinges

Round Body Barrel Weld-On Hinges
  • Weld-on barrel hinge is a lift off pivot hinge.
  • Features a round barrel body.
  • Made from steel base material.
  • Finishes:
    • Zinc chromate plated
    • Black coated (zinc chromate under black coating)
  • Hinge pin pivots on a ball bearing.
  • Features a "zerc" type grease fitting to keep the bearing lubricated.
  • The hinge pin is fixed in one of the barrels. In the photo to the left the barrel with the fixed hinge pin is the barrel on top.
  • The "Hinge Gap" is the distance between the post and the gate after the hinge is installed.
  • Each hinge has 2 weldable plates. Each plate measures as follows;
    • SKU 782500 (zinc) and SKU 782502 (black) measures 7/8" x 2" x 5/16"
    • SKU 782510 (zinc) and SKU 782512 (black) measures 1-3/4" x 3" x 3/16".
  • SKU #782500and 782502use for gates up to 6-8 feet wide
  • SKU #782510 and SKU 782512use for gates up to 12-15 feet wide
  • Please note: these hinges are sold by the PAIR. A pair is what is normally needed to hang one gate or door.

Finishes:

  • Zinc Plated
  • Black coated

  • Click here for Information & Pricing

    Welding Hinge with Grease fitting

    Welding Hinge with Grease fitting
    • This 2-piece weld-on hinge is extremely popular because of its high weight load capacity as well as it professional appearance.
    • Ideal for gates, machinery doors, barbeque pits, electrical boxes, and trailers.
    • It can be welded on as a lift-off hinge or it can be permanently mounted.
    • Made from mild steel (1015) with a case hardened fixed steel pin and a brass washer.
    • Grease fitting, for easy lubrication.
    • Weight rating shown is for a pair of hinges. A pair of hinges is two hinges.
    • The "S-dimension" is the diameter plus the welding area.
    Click here for Information & Pricing

    Welding Hinge, Two Piece Steel

    Welding Hinge, Two Piece Steel
    • This 2-piece weld-on hinge is extremely popular because of its high weight load capacity as well as it professional appearance.
    • Ideal for gates, machinery doors, barbeque pits, electrical boxes, and trailers.
    • It can be welded on as a lift-off hinge or it can be permanently mounted.
    • Made from mild steel (1015) with a case hardened fixed steel pin and a brass washer.
    • Weight rating shown is for a pair of hinges. A pair of hinges is two hinges.
    • The "S-dimension" is the diameter plus the welding area.
    Click here for Information & Pricing

    Welding Hinge, Two Piece Stainless Steel

    Welding Hinge, Two Piece Stainless Steel
    • This 2-piece weld-on hinge is extremely popular because of its high weight load capacity as well as it professional appearance.
    • Ideal for gates, machinery doors, barbeque pits, electrical boxes, and trailers.
    • It can be welded on as a lift-off hinge or it can be permanently mounted.
    • Made from stainless steel (Type 304) with a case hardened fixed stainless steel pin and a stainless steel washer.
    • Weight rating shown is for a pair of hinges. A pair of hinges is two hinges.
    • The "S-dimension" is the diameter plus the welding area.
    Click here for Information & Pricing

    Heavy Duty Stainless Steel Strap Hinge

    Heavy Duty Stainless Steel Strap Hinge
    • Heavy duty strap hinge for gates, truck doors or anywhere a heavy duty stainless steel strap hinge is needed.
    • Made for surface mounted flush installation.
    • Made from 0.197" thick stainless steel.
    • Horizontal strap measures 2.5" tall by 7-3/8" wide (measured from center of hinge pin).
    • Vertical strap measures 4-1/8" tall by 2-1/4" wide (measured from center of hinge pin).
    • Hinge pin is removable (held in place by a circlip). Hinge pin features a zerk fitting to allow lubrication.
    • Each hinge uses 6 each 5/16" lag screws (not included but offered for purchase during checkout).

    Finishes:

    • Polished Stainless
    Click here for Information & Pricing

    Heavy Duty British Style Strap Hinges

    Heavy Duty British Style Strap Hinges
    • Heavy duty strap hinge with Traditional British Hardware styling.
    • Strap is approximately 3/16" thick and 2" wide. Hinge pin is 5/8" in diameter.
    • Hardware as it is installed on post side of hinge measures approximately 6.5" tall by 2-1/4" wide.
    • Available in two finishes:
      • Black finish is amatte black coating.
      • Galvanized finish is a true heavy galvanizing suitable for outdoor use near a seacoast.
    • Matching wood screws are included.
      • One galvanized through bolt is included per hinge.
      • Through bolt is mounted in square hole.

    Finishes:

    • Matte Black
    • Galvanized
    Click here for Information & Pricing

    Extra Heavy Duty British Style Strap Hinges

    Extra Heavy Duty British Style Strap Hinges
    • These are the same hinges as our "Heavy Duty British Style Strap Hinges" except they are heavier and longer.
    • Extra Heavy duty strap hinge with Traditional British Hardware styling.
    • Strap is approximately 7/32" thick and 2-3/4" wide.
    • Hinge pin is 7/8" in diameter.
    • Hardware as it is installed on post side of hinge measures approximately 9.5" tall by 3" wide.
    • Black finish is amatte blackcoating.
    • Matching wood screws are included. One through bolt is included per hinge. Through bolt is mounted in square hole.

    Finishes:

    • Matte Black Coating
    Click here for Information & Pricing

    12", 18" and 24" Strap Hinge

    12
    • Strap side of hinge measures 3" wide and 5/32" thick and is made of plated steel
    • Plate side of hinge measures 6-1/8" by 2-1/2" by 1/2" thick and is made of cast aluminum
    • Hinge swings on bronze bearings
    • For doors where the frame and the door are flush
    • Hinge requires3/8" bolts (not included)
    • Available in two finishes: Highly polished Chrome plated or Black coated

    The 12", 18" and 24" dimensions are measured from the end of the strap to the pivot point of the strap

    Weight Ratings are for two hinges per door

    SKU 902002 and 902010

    • 250lbs for up to a 36" door and
    • 200lbs for a 36" to 40" door

    SKU 902004 and 902012

    • 300lbs for a 36" to 40" door
    • 250lbs for a 42" to 46" door

    SKU 902006 and 902014

    • 300lbs for up to a 48" door
    Click here for Information & Pricing

    Heavy Duty Lift-off Strap Hinges

    Heavy Duty Lift-off Strap Hinges
    • Heavy duty strap hinge, door or gate can be lifted off after installation.
    • Available in two finishes;matte black or heavy galvanized (true galvanizing not zinc plated). Galvanized models are suitable for sea coast use.
    • Traditional British Hardware styling.
    • Made from 3/16" thick steel.
    • Vertical mounting plate sizes;
      • For SKU 215108, it measures 1-7/16" x 5-1/4".
      • For SKU 215130 and 215110, it measures 1.5" x 5-3/8".
      • For SKU 215132 and 215112, it measures 2" x 6.5".
      • For SKU 215134 and 215114, it measures 2-3/16" by 6.5".
      • For SKU 215136,it measures8" by 2-3/16".
    • Matching wood screws are included.
    • One galvanized through bolt is included per hinge(carriage bolt; 3/8" x 4"). Through bolt is mounted in square hole.

    Finishes:

    • Matte Black
    • Galvanized
    Click here for Information & Pricing

    Gate Hinge, Textured Black Lift-Off

    Gate Hinge, Textured Black Lift-Off
    • Beautiful lift-off type gate hinge with uniquely textured surface.
    • Door or gate can be lifted off after installation.
    • Strap is made from 2" wide by 1/4" thick steel.
    • Vertical plate measures 1-3/4" by 6-1/4" by 7/32". Pintle diameter is 5/8".
    • Wood screws are included.

    PLEASE NOTE; the post plate and the gate plate for this hinge are offset from each other by 1/2". For most gate installations, this is not a problem. However, if you want your gate and post to be perfectly flush, you should not choose this hinge.

    Finishes:

    • Black Coated
    Click here for Information & Pricing

    Strap Hinges, Heart Style, Heavy Duty

    Strap Hinges, Heart Style, Heavy Duty
    • Strap hinges are available in two finishes. The 4 smaller sizes are a "Rough Black Iron" finish. The 2 larger sizes are a "Smooth Black Iron" finish.
    • The hinge pin is removable so that the pad (smaller leaf) may be reversed. This allows the hinge to be installed as either a full-surface hinge or a half-surface hinge.
    • The weight rating on the 9" and 13" hinge applies to a door with a maximum door thickness of 1-3/8" and a maximum door width of 32" using 3 hinges per door.
    • The weight rating on the 17" and 20.5" hinge applies to a door with a maximum door thickness of 1-3/4" and a maximum door width of 36" using 3 hinges per door
    • The 30" and 36" hinges are extra heavy duty hinges and are rated at 600# per pair of hinges.
    • These hinges match our "Heart" style gate latches found in the Gate Latch and Gate Lock section of the website. Two "Heart" style latches are offered for purchase during checkout.
    • Complete with screws.
    • Made from steel base material.

    Finishes:

    • Black Iron
    Click here for Information & Pricing

    Strap Hinges, Bean Style, Heavy Duty

    Strap Hinges, Bean Style, Heavy Duty
    • Strap hinges are available in either a "Rough Black Iron" or a "Smooth Black Iron" finishes.
    • Strap hinges are available in 4 lengths; 15-5/8", 19-5/8", 30" and 36". The 30" and 36" hinges are extra heavy duty hinges with a weight rating of 600 lbs per pair of hinges.
    • For interior or exterior use.
    • Hinge pin is removable.
    • Pad (small hinge leaf) is reversible for full or half-surface installation.
    • Comes complete with matching screws.
    • Weight rating is based on using 3 hinges per gate or door. For the 30" and the 36" hinges the weight rating is based on using 2 hinges per door.
    • These hinges match our other black iron hardware found in the Gate Hinges & Hardware section.

    Please note: The 30", smooth black finish hinge is a Special Order item. If you place an order for this item someone from our office will contact you. The lead time is approximately 1 week.

    Finishes:

    • Smooth Black Iron
    • Rough Black Iron
    Click here for Information & Pricing

    Extra Heavy Duty Strap Hinge

    Extra Heavy Duty Strap Hinge
    • These extra heavy duty ball bearing strap hinges can hold up to a 3800 lb. gate or door. Hinge choice is based on gate width and weight. See chart at link below to assist in hinge choice and number of hinges to use.
    • These are the best quality and heaviest weight strap hinges that we know of.
    • Offset pintle can be set back on face of jamb or wall to allow swing clear application.
    • Strap and pintle painted off-white. User can repaint with a different color if desired.
    • Pintle pin & bearings are zinc plated for rust resistance.
    • These hinges are made in USA.
    • Pintle uses 1/2" lag screw, strap uses 3/8" lag screw (lag screws are not included with hinge).
    • Click on the link below for a table that gives the weight ratings for these hinges.

    Finishes:

    • Painted off-white
    Click here for Information & Pricing

    Lift Off Strap Hinge, Stainless Steel, Heavy Duty

    Lift Off Strap Hinge, Stainless Steel, Heavy Duty
    • Stainless steel strap hinge is meant for use with cedar, redwood, vinyl or ACQ (treated) lumber.
    • Also for use in corrosive environments or where the look of stainless steel is desired.
    • Heavy duty strap hinge. Door or gate can be lifted off after installation.
    • Made from solid stainless steel material (0.156" thickness).
    • Vertical mounting plate measures 2" wide by 6.5" tall.
    • Stainless steel wood screws are included. Also included are 1/2" x 4" stainless steel carriage bolts (one per hinge). Carriage bolts install in the square hole as a through bolt.
    • Hinge is made from Type 316 Stainless. Fasteners are made from Type 305 Stainless.
    • These hinges are sold by the pair. A pair is two hinges.
    Click here for Information & Pricing

    Stainless Steel Weld-On Hinge, 4" Flag

    Stainless Steel Weld-On Hinge, 4
    • Stainless steel flag hinge for welding.
    • Made from type 304 stainless steel.
    • Hinge is 4" tall by 2.5" wide. Click on link below for more dimensions.
    • Hinge pin is fixed in bottom leaf. Top leaf will "lift off" bottom leaf.
    • Top leaf rides on a ball bearing fixed to the top of the hinge pin.
    • A pair of these hinges has a weight rating of 88 lbs.
    • These hinges are available in either a Left Hand or Right Hand model as shown in photo.
    • These hinges are sold by the "each". You would normally order 2 hinges per door you are hinging.

    Finishes:

    • Satin Stainless Steel
    Click here for Information & Pricing

    Stainless Steel Weld-On Hinge, 6" Flag

    Stainless Steel Weld-On Hinge, 6
    • Stainless steel flag hinge for welding.
    • Made from type 304 stainless steel.
    • Hinge is 6" tall by 2.5" wide. Click on link below for more dimensions.
    • Hinge pin is fixed in bottom leaf. Top leaf will "lift off" bottom leaf.
    • Top leaf rides on a ball bearing fixed to the top of the hinge pin.
    • A pair of these hinges has a weight rating of 198 lbs.
    • These hinges are available in either a Left Hand or Right Hand model as shown in photo.
    • These hinges are sold by the "each". You would normally order 2 hinges per door you are hinging.

    Finishes:

    • Satin Stainless Steel
    Click here for Information & Pricing

    Plain Steel Without Holes, Heavy Duty 3/8" Hinge Pin

    Plain Steel Without Holes, Heavy Duty 3/8
    • Plain steel base material, not plated.
    • Knuckle length is 2".
    • Hinge pin diameter is 3/8".
    • Economical for use where a strong hinge is needed and corrosion will not be a problem.
    • PLEASE NOTE! If you would like your piano hinge cut to a specific size, let us know in the comment box when you check out. You can save the "UPS oversize charge" by having your hinge cut to a size below 52". If we cut your piano hinge, we will ship all pieces. The first cut on each piece of hinge is free. Each additional cut is $3.00 (limit 5 cuts per hinge).
    • PLEASE NOTE: PIANO HINGE 52" OR LONGER IS CONSIDERED OVERSIZE BY UPS. AN ADDITIONAL $8.95 CHARGE WILL BE ADDED TO ANY PIANO HINGE WHICH IS SHIPPED 52" OR LONGER.YOU WILL ONLY BE CHARGED ONE $8.95 CHARGE PER ORDER.
    • Cut piano hinge may not be returned.

    Please Note: UPS does not guarantee delivery times on Next Day, 2nd Day or 3 Day shipments that are oversized. We do not recommend express delivery for piano hinges.

    Click here for Information & Pricing

    Center Hung Pivot Sets 1000-lb for 1-3/4" Doors

    Center Hung Pivot Sets 1000-lb for 1-3/4
    • High quality American made product
    • For doors sizes up to 4'0" by 8'6"
    • Pivot set is fully concealed
    • Bottom pivot is mortised into the floor
    • Set includes top pivot and bottom pivot
    • For 1-3/4" doors
    • Extra heavy duty bearings
    • All center hung pivot sets are double acting unless the door is stopped by some means on the door frame. Doors do not return to center automatically.
    • Comes complete with wood and machine screws
    • Maximum door weight is 1000 lbs.
    • For interior or exterior doors
    • Door must have radius on pivot edge
    • PLEASE NOTE: This item is a special order item. Delivery time is approximately two weeks. Special Order Items are not returnable.

    Finishes:

    • 605 (US3) Polished Brass
    • 613 (US10B) Oil Rubbed Bronze
    • 625 (US26) Bright Chrome Plated
    • 626 (US26D) Satin Chrome Plated
    Click here for Information & Pricing

    Center Hung Pivot Sets 1000 lb for 2" and Thicker Doors

    Center Hung Pivot Sets 1000 lb for 2
    • High quality American made product
    • For doors sizes up to 4'0" by 8'6"
    • Pivot set is fully concealed
    • Bottom pivot is mortised into the floor
    • Set includes top pivot and bottom pivot
    • For 2" or thicker doors
    • Extra heavy duty bearings
    • All center hung pivot sets are double acting unless the door is stopped by some means on the door frame. Doors do not return to center automatically.
    • Comes complete with wood and machine screws
    • Maximum door weight is 1000 lbs.
    • For interior or exterior doors
    • Door must have radius on pivot edge
    • PLEASE NOTE: This item is a special order item. Delivery time is approximately two weeks. Special Order Items are not returnable.

    Finishes:

    • 605 (US3) Polished Brass
    • 613 (US10B) Oil Rubbed Bronze
    • 625 (US26) Bright Chrome Plated
    • 626 (US26D) Satin Chrome Plated
    Click here for Information & Pricing
    accredited business BBB
    Sign up for email updates from HardwareSource and get 5% OFF your next order!
    Email: