Take-apart Hinges

Take-apart Hinges

Take-apart hinges allow a lid or small door to be lifted off or removed after the lid has been installed.

Take-Apart Hinge, Steel

Take-Apart Hinge, Steel
  • Hinge lifts apart so lid or door may be easily removed.
  • Steel base material.
  • Joint length is 1-5/16".
  • Open width is 1-5/16".
  • Uses #4 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

Steel Take-Apart Hinge

Steel Take-Apart Hinge
  • Steel base material.
  • Hinge lifts apart so lid or door may be easily removed.
  • Joint length is 1-5/16".
  • Open width is 1-7/8".
  • Used on cabinet or case where a removable cover is desired uses
  • Uses #6 pan head screws (not included included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

1-1/4" Steel Take-Apart Hinge

1-1/4
  • Hinge has 2 knuckle design.
  • Hinge slips apart at knuckle so lid or door may be easily removed.
  • Steel base material.
  • Joint length is 1-1/4".
  • Open width is 1-1/2".
  • Uses #6 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

2-1/4" Steel Take-Apart Hinge

2-1/4
  • Hinge lifts apart so lid or door may be easily removed.
  • Joint length is 2-1/4".
  • Open width is 1-7/8".
  • Steel base material.
  • Uses #8 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Zinc Plated
Click here for Information & Pricing

Stainless Steel Take-Apart Hinge

Stainless Steel Take-Apart Hinge
  • Unique take-apart or lift-off hinge
  • Take-apart or lift-off hinges allow the door or lid to be removed without having to remove the fasteners
  • Made from investment cast 316 stainless steel
  • Features tab on hinge barrel which keeps the door or lid from lifting off unless the door is in the fully open position
  • Hinge can be used on a box lid or door (see important door usage information below)
  • Hinge is meant to be used as a "surface mounted" hinge
  • Hinge is approximately 1.5" tall and 3.5" wide when measured with the hinge leafs open
  • Hinge is sold by the each. You will normally order 2 hinges per door or lid.
  • Each hinge uses 4 each #10 flat head screws, not included but offered for purchase during checkout.

Information regarding use of this hinge on a door

  • This hinge is only available in one model, a left hand hinge
  • If used as a door hinge, it can only be used on a door which is hinged on the left side of the cabinet.
  • If you are standing in front of the cabinet door, the door will be hinged on the left side.
  • It will not work on a door that is hinged on the right side.

Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email: