• These hinges are great for shutters. They are designed to allow the shutter to open wide to clear brick or wood moulding.

• Concealed hinges for windows. Eliminates the use of butt hinges with casement adjusters. Also allows access to outside of window from inside for cleaning.

• Designed for residential projects requiring relatively light window sections.
  • Maximum weight of 40lbs depending on model. See spec sheet for exact weight limits.
  • Click onPDF linkbelow for actual maximum weight specs and other info.
• 4 Bar Standard Duty Window Hinges, for casement or awning windows and for projected vents with a lip on the outside edge.
• 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
• These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
• Features set screw friction adjustment.
• These hinges also feature a "stop". Click on link below for stop opening angle.
• Available in 4 sizes, click on link below to see dimensions.
• Made from stainless steel.
• PLEASE NOTE: Model sizes listed below are nominal sizes. For actual length of hinge, click on link below.
• Each hinge uses #10 Pan Head Stainless Steel Screws (see Dimensional Diagram for number of screws per hinge). Not included but offered for purchase during checkout.
• Hinges are sold by the each. Order two hinges per window.

• Truth heavy duty 4-bar casement window hinge with stop at 90 degrees.
• This hinge is designed as an "Egress Hinge". When fully open, the sash is positioned close to the side jamb to allow an average sized person the ability to escape through the window's opening in case of an emergency as required by Egress Codes (always check with your local building department for your local building code requirements).
• Maximum weight of up to 158 lbs for a 36" wide window. Made for sash width range of 18" to 36".
• 4 Bar Heavy Duty Window Hinges are designed for projected vents with a lip on the outside edge.
• 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
• These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
• Features set screw friction adjustment.
• Nominal size is 16". Actual length is 16.75".
• Made from stainless steel.
• Each hinge uses #10 Pan Head Stainless Steel Screws (6 screws per hinge). Not included but offered for purchase during checkout.
• Hinges are sold by the each. Order two hinges per window.

• 4 bar hinge is for casement windows.
• Designed for residential projects requiring relatively light window sections.
• Maximum weight of 65lbs for a 32" wide window. Fits sash widths of from 12" to 36"
• Nominal size is 12". Actual length is 12.156".
• 4 Bar Standard Duty Window Hinges, for casement windows and for projected vents with a lip on the outside edge.
• 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
• These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
• Features set screw friction adjustment.
• Hinge stops at 90 degrees.
• Click on link below for dimensions.
• Made from stainless steel.
• Each hinge uses #10 Pan Head Stainless Steel Screws (6 per hinge). Not included but offered for purchase during checkout.
• Hinges are sold by the each. Order two hinges per window.

• Designed for commercial projects requiring heavier window sections.
  • Maximum weight of up to 200 lbs depending on model. See spec sheet for exact weight limits.
  • Click on PDF link below for actual maximum weight specs and other info.
• 4 Bar Heavy Duty Window Hinges, for casement or awning windows and for projected vents with a lip on the outside edge.
• 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
• These hinges are non-handed, they work on both left and right opening windows. Arm swings in both directions so the hinge can be used in either hand.
• Features set screw friction adjustment.
• These hinges also feature a "stop". Click on link below for stop opening angle.
• Available in 8 sizes, click on link below to see dimensions.
• Made from stainless steel.
• PLEASE NOTE: Model sizes listed below are nominal sizes. For actual length of hinge, click on link below.
• Each hinge uses #10 Pan Head Stainless Steel Screws (see Dimensional Diagram for number of screws per hinge). Not included but offered for purchase during checkout.
• Hinges are sold by the each. Order two hinges per window.

• Heavy Duty 4 Bar hinges are made for casement windows (not for awning windows).
• They have the capability of producing 90 degrees of window opening.
• 4 Bar Hinges are designed to project the sash out as it pivots to avoid interference between a lipped vent and frame.
• They are non-handed. Hinge is reversible, works on left opening and right opening casement windows.
• Made from non-magnetic stainless steel arms and track with a brass shoe that is tension adjustable.
• For window weights of up to 120lbs and 36" in width.
• For full detailed information from manufacturer, click on the links below.
• PLEASE NOTE: Model sizes listed below are nominal sizes. For actual length of hinge, click on link below.
• Each hinge uses #10 Pan Head Stainless Steel Screws (see Dimensional Diagram for number of screws per hinge). Not included but offered for purchase during checkout.
• Hinges are sold by the each. Order two hinges per window.

• Pivot hinge for windows, allows windows to pivot up to 360 degrees depending on installation of window in frame.
• Hinge is 4-5/8" long by 7/8" wide.
• Hinge is 9/16" thick at thickest point.
• The gap between the two leaves is 1/16". Hinge may be mortised into the bottom of the window and the frame for a minimum gap.
• Made from 1/8" thick material.
• Hinge pivots on an oilite, self-lubricating bearing.
• Flat head wood screws are included.
• Available in two models; solid brass or steel.
• These hinges are sold by the pair (2 hinges) which is normally what you need to hinge one window.

Finishes:

• Steel, yellow zinc chromate plated
• Solid Brass, natural, unfinished.