• Shutter hinge is for interior shutters.
• Made to fit shutter panel thickness of 1" to 1-1/16".
• Hinge pin is removable.
• Hinge measures 2-1/2" tall by 2-1/2" wide as measured in the open position and not including the bend in the larger leaf.
• The bend in the larger leaf measures 7/8".
• Made from steel base material.
• Uses #6 flat head screws. Not included but offered for purchase during checkout. Each hinge uses up to 7 screws per hinge depending on how it is installed.

Finishes:

• White
• Bright Nickel

• Butt hinge for interior shutters with wrap-around leaf, wraps around the back of the door.
• Made for 3/4" thick shutters.
• Fast pins, with bullet shaped tips.
• Steel base material.
• Each hinge leaf is 1-1/2" tall.
• Non-wrap hinge leaf is 5/8" wide.
• Wrap leaf is 3/4" wide
• Part of leaf that wraps around the back of the door is 1-1/2" tall by 1-3/16" wide.
• Matching wood screws are included.

Please note: We are currently out of the Chrome Plated finish, we will have these back in stock by the middle of May. If youplace an order for these hinges, we will hold your order and ship them assoon asthey areback in stock.

Finishes

• Satin Nickel
• Oil Rubbed Bronze
• Brass Plated
• Chrome Plated

• Shutter hinge for interior shutters.
• Made to fit shutter panel thickness of 1-1/8" to 1-3/16".
• Hinge pin is removable.
• Hinge measures 2-1/2" tall by 2-1/2" wide as measured in the open position and not including the bend in the larger leaf.
• The bend in the larger leaf measures 15/16".
• Made from steel base material. The Stainless steel model is solid stainless steel and is suitable for installation in damp or corrosive environments.
• Uses #6 flat head screws (not included). Use up to 7 screws per hinge.
• When you checkout you will be offered for purchase screws with a matching finish. For the Polished Chrome and Brushed Chrome hinges the best match is the "Zinc plated" screw.

Finishes:

• Off White
• White
• Polished Chrome
• Brushed Chrome
• Bright Nickel
• Polished Brass
• Antique Brass
• Industrial Stainless Steel

• Interior shutter hinge measures approximately 3" tall by 3" wide not including bend in large leaf.
• Bend in large leaf measures 1".
• Made for use with 1" to 1-1/4" thick shutters.
• Hinge pin is removable.
• Steel base material.
• Hinge shown in photo is the Brass plated finish.
• Matching wood screws are included.

Finishes:

• Brass plated

• Interior shutter hinge may be mounted on the edge or surface of the shutter.
• For a maximum door thickness of 3/4".
• Pin is removable. Hinge leaf is reversible.
• Hinge is 1-1/2" tall by 1-3/4" wide (not including bend in larger leaf)
• Bend in larger leaf measures 11/16"
• Two hinges will hold up to a 25lb shutter
• Three hinges will hold up to a 37lb shutter
• Steel base material
• #6 wood screws are included

Finishes:

• Brass finish

• Interior shutter hinge is made from .080 gauge steel.
• Made to use on 3/4" thick material.
• Flat leaf measures 1-1/2" tall by 2".
• Bent leaf measures 1-1/2" tall by 3/4" (from hinge pin to bend) and 1-1/2" tall by 1-1/4" (after bend).
• Flat head screws are included.
• Steel base material.

Finishes:

• Brass plated.
• Zinc Chromate plated.

• Wide throw allows shutter to fold flat against the wall
• Two hinges will hold a shutter up to 25lbs
• Three hinges will hold a shutter up to 37lbs
• Hinge pin is removable
• Hinge measures 1-1/2" tall by 2-7/8" wide
• Long leaf is 2" wide
• Short leaf is 7/8" wide
• Steel base material
• Wood screws are included

Finishes:

• Brass finish

• Interpanel shutter hinge is used to join shutter panels on interior shutters.
• Hinge measures 1-1/2" tall by 1-1/4" wide.
• Steel base material.
• Wood screws are included.
• Hinge features high friction so that shutter panel holds in any position (open, closed, half way).
• Two hinges will hold a 20lb shutter, three hinges will hold a 30lb shutter.

Finishes:

• Brass

• Interior shutter hinge.
• Hinge measures 1-1/2" tall by 1-3/4" wide
• Hinge pin is removable
• Steel base material
• Wood screws are included
• Two hinges will hold a 25lb shutter
• Three hinges will hold a 37lb shutter

Finishes:

• Brass finish

• No-mortise hinges make excellent hinges for interior shutters. Because of the way they are built they leave only a very small gap between the shutter and the installation strip.