• "Middle" shutter hinges are used with our "L Type" shutter hinges as a middle hinge. They are typically used with taller shutters to keep the shutter in alignment, to help keep the shutter from warping and to give the shutter a more decorative look.
• These shutter hinges are for "inset" shutters. Inset shutters are installed flush with the window frame when in the closed position (covering the window).
• The hinges are available in 3 different offsets (1/2",1-1/2" and 2-1/4") . The offset gives a "throw" which allows the shutter to lay flat against the house when in the open position.
• The "throw" is approximately double the offset. For example a hinge with a 1/2" offset has about 1" of throw.
• Pintle plate measures 1-1/2" by 3-3/4" by 1/8". Pintle diameter is 3/8".
• Vertical strap measures 1-3/8" wide and 7" tall.
• Shutter may be lifted off of pintles after installation.
• Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
• Matching wood screws are included.
• Sold by the pair. Order a pair to add "Middle" hinges to two shutters.

Finishes:

• Wrought Iron Black