Gate Tee Hinges

• Heavy duty ornamental style Tee hinges, available in 2 sizes, a 10" model and a 12" model.
• The 10" model is made from 1/8" thick steel. The 12" model is made from 3/16" steel.
• The pad dimensions refer to the vertical leaf of the hinge. The strap dimensions refer to the horizontal leaf of the hinge.
• The "Open Width" is the total overall width of the hinge as shown in the photo measuring from left to right.
• Hinge pin is non-removeable.
• Weight ratings listed are for a pair of hinges.
• Durable powder coating, made from steel base material, matching lag screws are included.

Finishes:

• Flat Black

• decorative style
• special bearing for extended life
• great for use on ornamental gates and mini-barns
• strap length measured to center of knuckle
• complete with screws
• steel base material

Finishes:

• Black Coated

• For wood, metal or vinyl gates
• Adjustable self closing gate hinge
• Made from glass fiber reinforced polymer (UV stabilized)
• Will not rust and never needs lubrication
• Internal stainless steel torsion spring
• Spring tension is incrementally adjustable with a screwdriver
• Hinge measures 7-3/4" tall by 9" wide
• Sheet metal screws are included
• Self closes light to medium weight gates up to 55lbs per pair of hinges
• Weight rating is based on a maximum gate size of 5' tall by 3' wide.

Finishes:

• Flat Black

• Heavy duty tee hinges.
• Special bearing increases life expectancy.
• Base material is steel, zinc plated for corrosion resistance.
• Strap length measured to center of knuckle
• Uses flat head screws (not included). Screw size and quantity are listed below.
• Flat head screws are offered for purchase during checkout

Finishes:

• zinc plated

• Light duty.
• Can be used indoors or outdoors.
• Ideal for small shed doors, tool boxes, and storage chests.
• Base material is steel, zinc plated for corrosion resistance.
• Strap length measured to center of knuckle.
• Uses flat head screws (not included). Screw size and quantity are listed below.
• Flat head screws are offered for purchase during checkout

• steel base material
• durable black finish
• self closing
• fully adjustable
• non-handed
• complete with lag screws

Finishes:

• Black Coated

• Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
• Excellent for use anywhere corrosion is a problem or the look of stainless steel is desired.
• Heavy duty construction.
• Made from solid stainless steel (Type 304)
• Strap length is measured from the tip of the strap to the far end of the hinge pin barrel.
• Pad width is measured from the edge of the pad to the inside edge of the hinge pin barrel.
• Strap width means widest part of strap.
• Stainless steel screws are included.

Finishes:

• Satin Stainless Steel

• Stainless steel T hinge, recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
• Excellent for use anywhere that corrosion is a problem.
• Heavy duty construction, non-removeable hinge pin.
• Strap length is measured from the tip of the strap to the far end of the hinge pin barrel.
• Pad width is measured from the edge of the pad to the inside edge of the hinge pin barrel.
• Strap width means the widest part of the strap.
• Hinge is made from Type 316 Stainless. Fasteners are made from Type 305 Stainless.
• Stainless steel screws are included.
• This hinge is sold by the "Pair". A pair is 2 hinges, usually what is required to hang one door.

Finishes:

• Satin Stainless Steel

• steel base material
• durable black finish
• reversible pin for right or left hand applications
• complete with lag screws

Finishes:

• Black Coated

• steel base material
• durable black finish
• reversible pin for right or left hand applications
• complete with lag screws

Finishes:

• Black Coated

• steel base material
• durable black finish
• self-closing
• fully adjustable
• extra heavy gauge steel
• reversible
• complete with lag screws

Finishes:

• Black Coated

• solid cast brass hinge with a natural rough finish
• hinge should be used where a rough look is appropriate
• strap length is 6" to center of knuckle
• thickness of the strap starts at 3/16" and tapers to 1/8" at its end
• uses #12 screws not included - screws are offered for purchase during checkout

Finishes:

• Natural

• heavy duty cast brass hinge
• 3 knuckle construction
• brass pin
• beautifully polished
• best quality
• made in USA
• complete with screws

Finishes:

• 605(US3)Polished Brass

• Heavy duty tee hinges with glossy black finish.
• Great for use on exterior or interior doors, gates, sheds, boxes, chests, etc.
• Made from steel base material with black enamel finish for excellent weather resistance.
• Available in 4 different strap lengths (4 inch, 5 inch, 6 inch and 8 inch).
• Matching flat head wood screws are included.
• Pad width and Strap length dimensions shown are measured from the center of the hinge barrel.
  • Pad is the vertical hinge leaf
  • Strap is the horizonal hinge leaf
• These hinges are sold by the pair. A pair is two hinges. A pair is what you normally need to hang one gate or door.

• Tee hinge is made from solid brass.
• Three knuckle construction and made with a solid brass hinge pin.
• The "Open Width" is the total overall width of the hinge as shown in the photo measuring from left to right.
• The pad length is the top to bottom measurement of the left hand hinge leaf as shown in the photo.
• The pad width is the width of the left hand hinge leaf as shown in the photo.
• Uses flat head screws (not included but offered for purchase during checkout). The screw size used is listed next to the SKU number of the hinge.
• PLEASE NOTE; the photo to the left shows the hinge in a polished brass finish. The polished brass finish is no longer available. We have limited availability on the polished chrome finish hinge.

Finishes:

• Polished Chrome

• Decorative tee hinge has flat black powder coating.
• Made from 1/8" thick steel.
• Hinge pin is reversible for left hand or right hand installation.
• Pad length and width dimensions refer to the vertical leaf shown in the photo. Strap dimensions refer to the horizonal leaf.
• Comes complete with black lag screws.

Finishes:

• Flat Black

• Beautifully finished tee hinges with heavy black powder coating.
• Made from 1/8" thick steel.
• Strap length is measured to the center of the hinge pin.
• Matching flat head screws are included.

Finishes:

• Black Powder Coated

• Hinge measures 5" wide in the open position.
• Narrow leaf measures 4.5" tall by 2" wide.
• Wide leaf measures 3-1/4" tall by 3" wide.
• Joint length is 4-3/4".
• Weight rating is 60lbs per hinge.
• Uses #10 wood screws. Not included but offered for purchase during checkout.
• SKU 215422 is a heavy galvanized finish, excellent for use on a sea coast or with redwood or treated lumber. The galvanized model has a solid brass hinge pin for extra corrosion resistance.
• Steel base material.

Finishes:

• Black coated
• Galvanized

• Hinge measures 5" wide in the open position.
• Narrow leaf measures 4.5" tall by 2" wide.
• Wide leaf measures 3-1/4" tall by 3" wide.
• Joint length is 4-3/4".
• Weight rating is 50lbs per hinge.
• Uses #10 wood screws. Not included but offered for purchase during checkout.
• Steel base material.
• PLEASE NOTE: This hinge is sold in a package of 10 hinges at a discounted price over buying them individually. It is the same hinge as our SKU 215421.

Finishes:

• Zinc Chromate

• Stainless steel hinge for use near marine environments or anywhere the look of stainless steel is desired.
• Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
• Hinge measures approximately 4.25" tall by 5" wide.
• Short leaf is 1-9/16" wide. Long leaf is 3-3/8" wide.
• Stainless steel fasteners are included.

Finishes:

• Satin Stainless Steel

• These hinges are sold by the pair. A pair includes one spring hinge and one non-spring hinge.
• Hinge measures 5.5" wide by 4" tall. Narrow leaf is 2" wide and wide leaf is 3.5" wide.
• For gates up to 50lbs in weight.
• Spring tension is adjustable with allen wrench (included).
• Matching screws are included.

Finishes:

• Black
• Zinc Chromate

• Click on the link below to go to our main Tee Hinge section where you will find our complete selection of Tee Hinges.