• Dummy straps install on the face of any door or gate to give the look of decorative strap hinges.
• The 5 smaller sized straps have a rough black iron finish. The 30" and 36" have a smooth black iron finish. Both finishes give a black wrought iron look.
• Decorative "Heart" styling.
• Steel base material and attachment screws are included.
• These dummy straps match the "Heart" style gate latches found in our Gate Latch and Gate Lock section.
• PLEASE NOTE: the two largest size straps (30" and 36") are a very heavy duty strap that is two times thicker than the other straps listed here (5/16" thick).

Finishes:

• Black Iron

• False Straps for use with butt style hinges
• Dummy straps are made from steel except for SKU 778264 and SKU 778266 which are made from cast aluminum. All have a smooth black iron finish.
• Spear shape at one end
• Complete with matching wood screws
• Be sure to see our other matching black iron hardware in the "Gate Latches & Handles" and the "Other Gate Hardware" sections.

Finishes:

• Smooth Black Iron

• Dummy straps install on the face of any door or gate to give the look of decorative strap hinges.
• Decorative "Bean" styling.
• Please note that some strap lengths are available in a rough black iron finish and some are available in a smooth black iron finish. Both finishes give a black wrought iron look.
• Attachment fasteners are included. Style of attachment varies. Please see link below for a schedule of included fasteners.
• Made from steel base material.
• Be sure to see our Gate Latch and Gate Lock section for more matching "Black Iron Hardware".
• PLEASE NOTE: the two largest size straps (30" and 36") are a very heavy duty strap that is two times thicker than the other straps listed here (5/16" thick).

Finishes:

• Smooth Black Iron
• Rough Black Iron

• Combine with a butt hinge to create the strength of a butt hinge and the look of a strap hinge
• Features decorative curls along edges
• Steel base material
• Screws are included
• Thickness of material is 5/32"

Finishes:

• Flat black

• False strap for use with butt hinges.
• Available in two lengths; 16" and 12". Actual lengths may vary by 1/4".
• The 12" is approximately 2-5/16" wide at the widest point.
• The 16" is approximately 4-3/8" wide at the widest point
• Made of rough iron with a flat black iron finish (Powder coated black)
• Matching fasteners are included.

Finishes:

• Black iron

• Decorative dummy strap hinge.
• Orleans style.
• Strap is 17-3/8" long by 2-3/4" at its widest point.
• Made from cast aluminum.
• Wood screws are included.
• Available in two finishes: Bronze or Black

• false straps for use with butt hinges.
• made of rough iron with a hammered flat black finish.
• strap is 3.5" wide at the widest point.
• uses a #7 flat or oval head screw (not included).

Finishes:

• flat black, hammered

• Combine with a butt hinge to create the strength of a butt hinge and the look of a strap hinge
• Overall length is 27-1/2"
• Pad end width is 1-9/16"
• Thickness is 7/32"
• Comes with decorative pyramid head screws (3/4" square head)

Finishes:

• smooth flat black

• Dummy straps install on the face of any door or gate to give the look of a decorative strap hinge. They are normally used in combination with full mortise butt hinges.
• Dummy straps made of solid bronze are for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
• Matching wood screws are included.
• These beautiful dummy straps are available in 6 lengths.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

Finishes:

• Solid Natural Bronze

• Solid bronze dummy strap hinge for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
• Dummy straps provide a decorative strap look to a gate or door hinged with full mortise butt hinges.
• Available in two lengths. Both sizes are made from 1/4" thick material. Both sizes are 2" wide and measure 4" at the widest part.
• Stainless steel lagscrews are included. Lag screws are coated with a finish that matches the bronze finish.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

Finishes:

• Solid Natural Bronze

• False Strap for use with butt hinges
• Black square head screws are included
• 24 inches in length
• 10-1/2 inches at widest point
• made of 7/64" thick steel

Finishes:

• Black Iron

• English style dummy strap is available in two lengths; 12" and 16".
• The 12" strap measures 4.5" at its widest point.
• The 16" strap measures 6.25" at its widest point.
• Both are made from approximately 7/32" steel.
• Wood screws are included.

Finishes:

• Black Powder Coated

• Ornamental dummy strap is meant to be used with a butt type hinge.
• Strap measures 10" long by 2-1/4" at its widest point. Thickness is 3/16".
• Made of steel with rough texture to simulate wrought iron.
• Matching wood screws are included.

Finishes:

• Black Powder Coated

• Ornamental dummy strap is meant to be used with a butt type hinge.
• Strap measures 8.5" long by 2-3/8" at its widest point. Thickness is 1/4".
• Made of steel with rough texture to simulate wrought iron.
• Matching wood screws are included.

Finishes:

• Black Powder Coated

• Flat end dummy strap is used with a butt hinge to give the strap hinge appearance.
• Dummy strap is available in 4 lengths. All dummy straps are 1/4" thick and 1-1/2" in width.
• Made from steel.
• Includes wood screws for installation and round 1-3/8" clavos to cover up the wood screw heads and for additional detail.

Finishes:

• Flat Black Wrought Iron

• Dummy straps install on the face of any door, gate or shutter to give the look of decorative strap hinges.
• These dummy straps feature a black hammered or wrought iron look with an arrowhead style.
• Available in 4 lengths. They are 2" wide and 1/4" thick.
• Round decorative clavos (1-1/4" diameter) are included to cover up the attachment screws (which are included also).
• Made from steel base material.

Finishes:

• Hammered Black Iron