• Strap hinges are available in two finishes. The 4 smaller sizes are a "Rough Black Iron" finish. The 2 larger sizes are a "Smooth Black Iron" finish.
• The hinge pin is removable so that the pad (smaller leaf) may be reversed. This allows the hinge to be installed as either a full-surface hinge or a half-surface hinge.
• The weight rating on the 9" and 13" hinge applies to a door with a maximum door thickness of 1-3/8" and a maximum door width of 32" using 3 hinges per door.
• The weight rating on the 17" and 20.5" hinge applies to a door with a maximum door thickness of 1-3/4" and a maximum door width of 36" using 3 hinges per door
• The 30" and 36" hinges are extra heavy duty hinges and are rated at 600# per pair of hinges.
• These hinges match our "Heart" style gate latches found in the Gate Latch and Gate Lock section of the website. Two "Heart" style latches are offered for purchase during checkout.
• Complete with screws.
• Made from steel base material.

Finishes:

• Black Iron

• Strap hinges are available in either a "Rough Black Iron" or a "Smooth Black Iron" finishes.
• Strap hinges are available in 4 lengths; 15-5/8", 19-5/8", 30" and 36". The 30" and 36" hinges are extra heavy duty hinges with a weight rating of 600 lbs per pair of hinges.
• For interior or exterior use.
• Hinge pin is removable.
• Pad (small hinge leaf) is reversible for full or half-surface installation.
• Comes complete with matching screws.
• Weight rating is based on using 3 hinges per gate or door. For the 30" and the 36" hinges the weight rating is based on using 2 hinges per door.
• These hinges match our other black iron hardware found in the Gate Hinges & Hardware section.

Finishes:

• Smooth Black Iron
• Rough Black Iron

• For interior or exterior use
• Hinge pin is removable
• Pad is reversible for full or 1/2 surface installation
• Weight rating is based on using 3 hinges per gate or door.
• Comes complete with matching screws
• Be sure to see our other Black Iron Gate Hardware in the sections entitled "Gate Latches and Handles" and "Other Gate Hardware"

Finishes:

• Smooth Black Iron

• Ornamental strap hinge is meant to be surface mounted.
• Strap measures 15" long and 6" at its widest point.
• Hinge leaf measures 4" tall by 1-3/8".
• Matching flat head wood screws are included.
• Made from steel base material.
• Rated at 70 lbs per pair.

Finishes:

• Black Powder Coated

• Ornamental strap hinge is meant to be surface mounted (door and frame are flush with each other).
• Available in two lengths; an 11" strap length and an 18" strap length (measured from tip to center of hinge pin).
• Hinge leaf measures 4" tall.
• Matching flat head wood screws are included.
• Made from steel base material and powder coated black to resist corrosion.

Finishes:

• Black Powder Coated

• steel base material
• coated with a durable black finish
• reversible pin provides for right or left hand applications
• post leaf is 4"
• strap length is 7-11/16"
• complete with lag screws

Finishes:

• Black Coated

• steel base material
• coated with a durable black finish
• reversible pin provides for right or left hand installations
• post leaf is 4-7/16"
• strap length is 8"
• complete with lag screws

Finishes:

• Black Coated

• Hinge features a decorative scalloped design.
• Made from steel base material.
• Hinge is coated with a durable black finish.
• Features a special bearing to give extended service.
• Complete with screws.
• PLEASE NOTE: The "Size" refers to the length of one hinge leaf. The "Size Open" dimension is the tip-to-tip" measurement when the hinge is in the open position as shown in the photo.

Finishes:

• Black Coated

• heavy duty construction minimizes gate sag
• durable black finish
• reversible pin provides for right or left hand applications
• steel base material
• complete with lag screws

Finishes:

• Black Coated

• Antique style strap hinge made for surface mounting (door and frame are flush with each other).
• Strap leaf measures 11-3/4" by 2-3/8" at widest point.
• Vertical leaf measures 4-5/16" by 1-1/8".
• Measurements are to center of hinge pin.
• Hinges are weight rated at 30 lbs. per pair.
• Made from steel base material. Matching wood screws are included.

Finishes:

• Black Powder Coated

• Antique style shutter hinge made for surface mounting.
• Strap leaf measures 12-1/4" by 2-3/4" at widest point.
• Vertical leaf measures 5-1/4" by 1-3/8".
• Width measurements are to center of hinge pin.
• Hinges are weight rated at 50 lbs per pair.
• Made from steel base material. Matching wood screws are included.

Finishes:

• Black powder coated