Gate Spring Hinges

Gate Spring Hinges

  • Over 70 spring hinges for gates are found in this section.
  • In this section you will find
    • Tru close spring hinges
    • Round post spring hinges
    • Tru close Tee spring hinge
    • Double acting spring gate hinges
    • Single acting spring hinges
    • and more

SureClose ReadyFit Hinges

SureClose ReadyFit Hinges
  • SureClose is a hinge & closer, in one small, powerful package.
  • Quick-fit alignment legs, for ease of installation.
  • Multiple adjustment options.
  • With final Snap Close feature.
  • Swimming Pool gate models available.
Click here for Information & Pricing

SureClose Internal Post Mount

SureClose Internal Post Mount
  • SureClose is a hinge & closer, in one small, powerful package.
  • Steel or Aluminum brackets.
  • For weld-on or bolt-on applications.
  • Hidden hydraulics are tamper resistant.
  • Snap Close options available.
  • Swimming Pool gate models available.

Click here for Information & Pricing

SureClose, Double Acting

SureClose, Double Acting
  • SureClose, Center Mount self closing hinges.
  • Gate can swing 90 degrees in either direction.
  • Will self close up to 260 pounds.
  • For bolt on or weld-on applications.
  • Tamper resistant design.
Click here for Information & Pricing

Round Post Spring Hinge, Heavy Duty

Round Post Spring Hinge, Heavy Duty
  • Tru-Close heavy duty round post hinges are designed to fit a wide range of common round-posted gates and fences.
  • Creates a self-closing gate where no gate closer is necessary. The spring tension is easily adjustable.
  • Fits post diameters of 1-7/8" to 2" and 2-3/8" and 2-7/8".
  • Fits gate frame diameters of 1-3/8" and 1-5/8".
  • Made from a high tech polymer (UV stabilized) for excellent weather resistance. Springs and internal parts are stainless steel. Hinge is self lubricating.
  • Hinge accomodates a gap between the fence and post from 3/4" to 1-3/8".
  • Hinge measures approximately 5" tall by 4" wide.
  • Each pair of hinges is packaged as a kit which includes shims, adapters, instructions and fastening screws.
  • These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

Finishes:

  • Flat black
Click here for Information & Pricing

Spring Hinge for Round Posts & Fences, Heavy Duty

Spring Hinge for Round Posts & Fences, Heavy Duty
  • Tru-Close heavy duty round post hinges are designed to fit a wide range of common round-posted gates and fences.
  • Creates a self-closing gate where no gate closer is necessary. The spring tension is easily adjustable.
  • Fits post diameters of 1-7/8" to 2" and 2-7/8".
  • Fits gate frame diameters of 1-7/8" to 2".
  • Made from a high tech polymer (UV stabilized) for excellent weather resistance. Springs and internal parts are stainless steel. Hinge is self lubricating.
  • Hinge accomodates a gap between the fence and post from 3/4" to 1-3/8".
  • Hinge measures approximately 5" tall by 4-1/2" wide.
  • Each pair of hinges is packaged as a kit which includes shims, adapters, instructions and fastening screws.
  • These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

Finishes:

  • Flat black
Click here for Information & Pricing

Tru-Close Multi Adjustable Spring Hinge

Tru-Close Multi Adjustable Spring Hinge
  • TruClose heavy duty spring gate hinge, designed for wood or vinyl gates.
  • Will self-close gates up to 132 lbs.
  • Spring loaded for self closing gates. Hinge spring is adjustable.
  • Hinge measures approximately 7" wide by 5" tall.
  • Features 3-way adjustability; spring tension, vertical adjustment and horizontal adjustment. Both vertical and horizontal adjustment is up to 3/4".
  • The ideal gap between the fence and post is 1", but the hinge will work with gaps that range from 5/8" to 1-3/8".
  • Features side fixing legs for a more secure attachment.
  • Features tough molded polymer construction with stainless steel torsion spring.
  • All fasteners are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Tru-Close Spring Hinge for Wood or Vinyl Gates

Tru-Close Spring Hinge for Wood or Vinyl Gates
  • For wood or vinyl gates
  • Adjustable self-closing gate hinge
  • Made from glass-fiber reinforced polymer (UV stablilized)
  • Will not rust and never needs lubrication
  • Internal stainless steel spring
  • Spring tension is incrementally adjustable with a screwdriver
  • Hinge measures 3-3/4" tall by 5-1/4" wide
  • Self closes light to medium weight gates up to 55lbs per pair of hinges
  • Weight rating is based on gate maximum size of 5' high by 3' wide
  • Uses #10 Round head wood screws (not included). Round head stainless steel screws are offered for purchase during checkout.
  • These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

Finishes:

  • Flat Black
Click here for Information & Pricing

Tru-Close Spring Hinge for Metal Gates

Tru-Close Spring Hinge for Metal Gates
  • For gates made from metal square tubing
  • Hinge is adjustable and self closing
  • Made from glass-fiber reinforced polymer (UV stabilized)
  • Will not rust and never needs lubrication
  • Internal stainless steel spring
  • Spring tension is incrementally adjustable with a screwdriver
  • Hinge measures 3-25/32" tall by 3-1/32" wide
  • Self closes light to medium gates up to 55lbs per pair of hinges
  • Weight rating is based on gate maximum size of 5' high by 3' wide
  • Hinges include plates which snap onto hinge to cover up the screw holes (not shown in image)
  • Uses #10 Round head screws (not included). Stainless steel screws are offered for purchase during checkout.
  • These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

Finishes:

  • Flat Black
Click here for Information & Pricing

Tru Close Heavy Duty Spring Hinge for Metal Gates

Tru Close Heavy Duty Spring Hinge for Metal Gates
  • Self closing hinge for heavy or high traffic metal gates.
  • Tough polymer molded construction with stainless steel torsion spring. Spring tension is adjustable with a screwdriver.
  • Hinge measures 5" tall by 3-1/2" wide.
  • Hinge is weight rated for a maximum gate weight of 132lbs per pair of hinges
  • Weight rating is based on a maximum gate size of 6' high by 4' wide
  • Uses #12 pan head screws (not included). Stainless steel screws are offered for purchase during checkout.
  • This model hinge has side legs which wrap around the fence post and edge of gate 1" for added strength

Finishes:

  • Flat Black
Click here for Information & Pricing

Tru-Close T Hinge, Self Closing

Tru-Close T Hinge, Self Closing
  • For wood, metal or vinyl gates
  • Adjustable self closing gate hinge
  • Made from glass fiber reinforced polymer (UV stabilized)
  • Will not rust and never needs lubrication
  • Internal stainless steel torsion spring
  • Spring tension is incrementally adjustable with a screwdriver
  • Hinge measures 7-3/4" tall by 9" wide
  • Sheet metal screws are included
  • Self closes light to medium weight gates up to 55lbs per pair of hinges
  • Weight rating is based on a maximum gate size of 5' tall by 3' wide.

Finishes:

  • Flat Black
Click here for Information & Pricing

Tru Close Multi Adjustable Hinge

Tru Close Multi Adjustable Hinge
  • Hinge is adjustable vertically, horizontally and for spring tension.
  • Hinge measures 3-3/4" high by 4" wide
  • Will work for gates with a gap of up to 2"
  • Self closes gates weighing up to 55lb
  • Weight rating is based on gate maximum size of 5' high by 3' wide (per pair of hinges)
  • Molded polymer construction with stainless steel torsion spring
  • Spring tension is easily adjustable with a screwdriver
  • Hinge has side legs which wrap around the fence post and edge of gate 1" for added strength
  • Instructions and mounting screws are included

Finishes:

  • Flat Black
Click here for Information & Pricing

Tru-Close Spring Hinge for Gates, Heavy Duty

Tru-Close Spring Hinge for Gates, Heavy Duty
  • For wood, metal or vinyl gates.
  • Adjustable self-closing gate hinge.
  • Made from glass-fiber reinforced polymer (UV stablilized).
  • Will not rust and never needs lubrication.
  • Internal stainless steel spring.
  • Spring tension is incrementally adjustable with a screwdriver.
  • Hinge measures 5" tall by 5" wide.
  • Self closes heavy gates up to 132lbs per pair of hinges
  • Available in two models. SKU 928110 has alignment legs which fix the gap between the post and gate at 3/4". The alignment legs are 1-1/4" in depth and are attached at right angles to the hinge leaves. SKU 928115 has no alignment legs so the gap is variable.
  • Weight rating is based on gate maximum size of 6' high by 4' wide
  • Uses #12 Pan head wood screws (not included). Pan head stainless steel screws are offered for purchase during checkout.
  • These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

Finishes:

  • Flat Black
Click here for Information & Pricing

Double Acting Spring Gate Hinges, Surface Mounted

Double Acting Spring Gate Hinges, Surface Mounted
  • surface applied to gate and jamb
  • non-adjustable tension
  • steel
  • domestic
  • complete with wood screws (#7 x 3/4")

*Maximum door weight (lbs.)

Finishes:

  • 601 (US1B) bright black japanned
  • 633 (US4) satin brass plated
  • 600 (USP) prime coated
Click here for Information & Pricing

Double Acting Spring Hinges-

Double Acting Spring Hinges-
  • These hinges allow door to open 180 degrees in either direction and spring action returns door to center closed position.
  • These hinges are also known as "Saloon Door Hinges".
  • Spring tension is adjustable.
  • The satin brass finish is the most popular finish. The photo to the left shows the zinc chromate finish.
  • The manufacturer recommends using three hinges per door. The center hinge should be installed as close as possible to the top hinge for maximum support.
  • Steel base material.
  • All are domestic products except those with a SKU number that starts with 814.
  • Complete with wood screws.
  • #814036 through #814040 are imported and are not weight rated.
  • "Size" is the height of the plate that mounts on the door and jamb.

*Maximum door weight (lbs.) using three spring hinges

Finishes:

  • 633 (US4) satin brass plated.
  • 603 (US2G) zinc chromate plated.
  • 600 (USP) primed for painting.
Click here for Information & Pricing

Single Acting Spring Hinge Square Corner-

Single Acting Spring Hinge Square Corner-
  • non-handed
  • steel material
  • easily adjusted spring tension
  • screw hole pattern conforms to ANSI specifications for template hinges
  • pivot point aligns with non-spring hinges of the same size
  • screws are included

Maximum door weight using three spring hinges

  • 3-1/2" - 90 lbs.
  • 4" - 110 lbs.
  • 4-1/2" - 150 lbs.

Finishes:

  • 632 (US3) bright brass plated
  • 633 (US4) satin brass plated
  • 600 (USP) primed for painting
  • 640 (US10B) oil rubbed bronze
  • 646 (US15) satin nickel plated
  • 652 (US26D) satin chromium plated
  • 651 (US26) bright chromium plated
  • 643 (US11) satin bronze plated, blackened, satin relieved, clear coated (similar to oil rubbed bronze, but on steel)
Click here for Information & Pricing

Weld-On Spring Hinge

Weld-On Spring Hinge
  • Heavy duty self closing weld-on hinge.
  • With this hinge, you no longer need a separate closer for jobs that require a self closing gate.
  • The closer is built right into the hinge.
  • Ideal for panic bar installations.
  • Closes in one direction only (not for gates needing to swing in both directions).
  • Hinge set works with either round or flat gate posts (weldable surface is slightly indented)
  • Weight rated for up to a 2000 lb gate.
  • Dimensions:
    • Top Hinge
      • Approximately 4" tall
      • Approximately 3" wide (gap between post and gate frame is adjustable 2-1/2" to 3")
      • Approximately 1-1/2" thick
      • For more detailed dimensions, click on link below
    • Bottom Hinge
      • Approximately 5" tall
      • Approximately 3" wide (gap between post and gate frame is adjustable 2-1/2" to 3")
      • Approximately 1-1/2" thick
      • For more detailed dimensions, click on link below
  • Features:
    • Maintenance-free bearings
    • Adjustable spring tension
    • Adjustable yoke (1/2" of adjustability)
    • One page instruction sheet
    • Made from steel and zinc chromate plated
  • Sold by the set. A set includes a top hinge (non-spring loaded) and a bottom spring-loaded hinge. A set is what you need to hang one gate or door.

IMPORTANT INFORMATION: A pair of these hinges will support the weight of a 2000 lb gate. However, there are a number of factors that determine whether the gate will self-close using this hinge set. Those factors include the weight of the gate, the height and width of the gate, the quality of the weld job and average wind speeds in the area. The manufacturer does not offer any guidance regarding the self closing ability

PLEASE NOTE: This hinge is unique and requires very special care when installing for the self closing feature to work properly.
Gate Post: The gate post that the hinge is attached to must be installed so that is is perfectly plumb.
Alignment: The centerline of the hinge pins of both hinges (top and bottom hinge) after installation, must be in exact alignment to each other (tolerance not to exceed plus or minus 1/16"). of this hinge. We highly recommend using very conservative gate weights when considering this hinge.

Click here for Information & Pricing

Spring Gate Hinge for Vinyl Gates

Spring Gate Hinge for Vinyl Gates
  • Self-Closing Hinge for Vinyl Gate and Fence.
  • Adjustable spring tension closes gate.
  • Made from Stainless steel material, hinge barrel tips are plastic.
  • Gap between gate frame and gate post is adjustable (maximum gap is 1.5").
  • Features wrap around leaves for extra attachment strength.
  • Measurements:
    • Hinge leaf height is 3.5".
    • Post leaf width is 3-9/16".
    • Gate leaf width is 2-3/4".
    • Each Leaf Wrap around is 1-1/4"
  • Fasteners are included.
  • This hinge is sold by the pair. A pair of hinges is two hinges, what is typically needed to hang one gate.

Finish:

  • Black

Click here for Information & Pricing

Single Acting Spring Hinge

Single Acting Spring Hinge
  • Non-template hinge, for wood doors. Hinges have screwholes but are also weldable for metal gates.
  • Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
  • Large diameter barrel matches older style single acting pivot hinges.
  • Steel base material.
  • The 3" hinge comes with wood screws.
  • The 6" and 7" size come with machine screws.
  • The "Size" dimension is the height of the plate that mounts on the door and jamb.
  • The 3" hinge maximum door weight is 45lbs using 2 hinges and 65lbs using 3 hinges.
  • The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.
  • The 7" hinge maximum door weight is 130lbs using 2 hinges and 175lbs using 3 hinges.

Finishes:

  • 601 (US1B) bright black japanned
  • 600 (USP) primed for painting.
Click here for Information & Pricing

Single Acting Spring Butt, Combination Corner (Square, 5/8" Radius)

Single Acting Spring Butt, Combination Corner (Square, 5/8
  • Combination corner hinge: one leaf has square corners, one leaf has 5/8" radius corners
  • steel base material
  • easily adjusted spring tension
  • pivot point of hinge aligns with non-spring hinges of the same size
  • matching wood and machine screws are included

Finishes:

  • 633 (US4) Satin Brass
  • 600 (USP) Prime Coated
  • 646 (US15) Satin Nickel
  • 640 (US10B) Oil Rubbed Bronze
Click here for Information & Pricing

Single Acting Spring Hinge, Reverse Action

Single Acting Spring Hinge, Reverse Action
  • This hinge has a reverse action spring which means that the spring action works to open the door rather than close the door.
  • Non-template hinge, for wood doors. Hinges have screwholes but are also weldable for metal gates.
  • Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
  • Steel base material.
  • Wood screws are included on the 3" size.
  • Machine screws are included on the 6" size.
  • The "Size" dimension is the height of the plate that mounts on the door and jamb.
  • The 3" hinge maximum door weight is 45lbs using 2 hinges and 65lbs using 3 hinges.
  • The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.

Finishes:

  • 652(US26D) Satin Chrome
  • 601(US1B) Bright Black Japanned
Click here for Information & Pricing

Spring Butt Hinges, Stainless Steel

Spring Butt Hinges, Stainless Steel
  • Spring hinges made from stainless steel.
  • Spring tension is adjustable.
  • Screw hole patterns conform to ANSI specifications for template hinges.
  • Pivot point aligns with non-spring hinges of the same size.
  • Screws are included.
  • Photo to left shows hinge with the Bronze finish.
  • PLEASE NOTE: Some of the models have a stainless steel spring and some of the models have a steel spring. The steel spring is coated with laquer which will offer protection but will eventually rust.

Maximum door weight using three spring hinges

  • 4" - 110 lbs.
  • 4-1/2" - 150 lbs.

Finishes:

  • Bronze
  • Satin Stainless Steel
Click here for Information & Pricing

Ornamental Spring Tee Hinge

Ornamental Spring Tee Hinge
  • steel base material
  • durable black finish
  • self closing
  • fully adjustable
  • non-handed
  • complete with lag screws

Finishes:

  • Black Coated
Click here for Information & Pricing

4" Gate Spring Tee Hinge Set

4
  • These hinges are sold by the pair. A pair includes one spring hinge and one non-spring hinge.
  • Hinge measures 5.5" wide by 4" tall. Narrow leaf is 2" wide and wide leaf is 3.5" wide.
  • For gates up to 50lbs in weight.
  • Spring tension is adjustable with allen wrench (included).
  • Matching screws are included.

Finishes:

  • Black
  • Zinc Chromate
Click here for Information & Pricing

8" Heavy Duty Black Spring Tee Hinge

8
  • Black decorative heavy duty spring tee hinge for gates.
  • Horizontal strap measures approximately 2" wide by 8" long.
  • Vertical strap measures approximately 1-3/8" by 7-3/8" tall.
  • Hinge is sold by the pair which is normally what you need to hang one gate.
  • Both hinges in the pair are spring loaded and the spring tension is adjustable.
  • Steel base material and matching hex head lag screws are included.

Finishes:

  • Black coated
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from Hardware Source and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products