• Pivot type welding hinge with roller bearings.
• Available in a 3" or a 4" size.
• The 3" size has a sealed roller bearing that measures 1-3/8" outside diameter by .622" inside diameter by .43" thick. Uses a 1/2" x 4" pivot bolt. Post side welding plate measures 1.5" x 3.5". Gate side welding plate measures 1.5" x 2.75". The spacing between the gate and post is 2.71".
• The 4" size has a sealed roller bearing that measures 1.849" outside diameter by .786" inside diameter by .55" thick. Uses a 5/8" x 5" pivot bolt. Post side welding plate measures 2" x 4.25". Gate side welding plate measures 2" x 3.25". The spacing between the gate and post is 4.25".
• Both hinges feature a 220 degree swing range. Both hinges use a nylon locking nut on the bottom of the pivot bolt.
• Made from steel base material.
• These hinges are sold by the pair which means two hinges. A pair is normally what you need to hang one gate.
• Weight ratings are based on using a pair of hinges.
• Hinges are made in the U.S.A.

Finishes:

• Painted Black