Ring Turn Latches and Slide Bolts for Gates

Ring Turn Latches and Slide Bolts for Gates

  • Our selection of decorative ring turn latches and slide bolts for gates.
  • Over 20 different ring turn latches and slide bolts can be found in this section.

Spring Loaded Gate Bolt

Spring Loaded Gate Bolt
  • Spring loaded slide bolt for gates and doors.
  • Spring tension keeps the bolt in a thrown position.
  • Overall length of the bolt measures 8-5/8".
  • Bolt diameter is 1/2".
  • Mounting plate for bolt measures 1-1/2" x 4-1/2".
  • Strike plate measures 2-1/8" x 2-9/16".
  • Mounting screws are included
  • Made of steel base metal.

Finish

  • Zinc Plated
Click here for Information & Pricing

Slide Bolt, Solid Bronze, 4 Inch

Slide Bolt, Solid Bronze, 4 Inch
  • Solid bronze slide bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Slide bolt is designed to be surface mounted.
  • Measures approximately 5 inches in length including strike plate. Width is 1-1/2". Projection is 1-1/4".
  • Stainless steel screws are included. They are coated with a matching bronze finish.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
Click here for Information & Pricing

Ring Turn Bar Latch, Solid Bronze

Ring Turn Bar Latch, Solid Bronze
  • Very high quality Ring Turn Bar Latch for gates and doors.
  • Latch operates from both sides of the gate.
  • Made from solid bronze and is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Available in a "Right Hand" or "Left Hand" model. Model shown in photo is the "Right Hand" model.
  • Drop Bar measures 7". Back Plates measure 2-3/4" by 4-1/2". Ring diameter is 3-1/2".
  • Fits gate thicknesses of 3/4" to 2.5". The spindle that connects the front and back piece is a 5/16" square steel rod.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
  • If you have double doors and need a "dummy" ring turn to go with this, order our SKU 850072 (click here).
  • The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Bronze gate stop is offered for purchase during checkout.

Finishes:

  • Natural Solid Bronze
Click here for Information & Pricing

Large Ring Turn, Solid Bronze

Large Ring Turn, Solid Bronze
  • Solid Bronze ring turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Ring turn may be used as a "pull" or may be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
  • To create a gate latch purchase 2 ring turns (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
  • Ring turn back plate measures 4-1/2" tall and 2-3/4" wide. Diameter of ring is 4-3/4".
  • Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
  • Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
  • Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
  • Mounting screws are included with the ring turn.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
Click here for Information & Pricing

Ring Turn, Solid Bronze

Ring Turn, Solid Bronze
  • Solid Bronze ring turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Ring turn may be used as a "pull" or may be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
  • To create a gate latch purchase 2 ring turns (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
  • Ring turn back plate measures 4-1/2" tall and 2-3/4" wide. Diameter of ring is 3-1/2".
  • Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
  • Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
  • Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
  • Mounting screws are included with the ring turn.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

Finishes:

  • Solid Natural Bronze
Click here for Information & Pricing

Barrel Bolt, Solid Bronze

Barrel Bolt, Solid Bronze
  • Solid bronze barrel bolt is lockable with a padlock (padlock not included).
  • Bolt measures 8" long by 5/8" diameter.
  • Handle measures 4".
  • Mounting brackets are 1-3/4" by 3/4".
  • Barrel bolt surface mounts to gate or door.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

Finishes:

  • Natural Bronze
Click here for Information & Pricing

Solid Bronze Surface Bolt, 8 Inch

Solid Bronze Surface Bolt, 8 Inch
  • Solid bronze surface bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Surface bolt measures 8" long by 1-3/4" wide.
  • Wood screws are included.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

Finishes:

  • Natural Bronze
Click here for Information & Pricing

Gate Latch, Large Black Antique Ring Type

Gate Latch, Large Black Antique Ring Type
  • Large gate latch fits gates up to 4" thick.
  • Simple lever latching action.
  • Lever latch measures 7-1/4" from pivot point to end of lever latch.
  • Twist ring measures 4" in diameter.
  • Gate spindle is easily cut with a hacksaw. Cut spindle approximately 1" longer than gate is thick.
  • Made from steel base material.
  • Matching wood screws are included.
  • Also available on this page is a matching dummy ring. This is the ring only without the latch for use as a dummy when you have double gates.

Finishes:

  • Blackcoated
Click here for Information & Pricing

Gate Latch, Small Twist Ring Type

Gate Latch, Small Twist Ring Type
  • Twist ring gate latch operates with simple lever action.
  • Ring diameter is 3".
  • Strike bar measures 1" by 5.5".
  • Fits gate or door up to 3" thick. Gate spindle is easily cut with a hacksaw. Cut spindle approximately 1" longer than gate is thick.
  • Made from steel base material.
  • Also available on this page is SKU 215309 which is the matching dummy ring for SKU 215310. This dummy ring is non-working and has no latch parts. It is usually used when you have double gates and want a ring only on one of the gates.
  • Matching wood screws are included.

Finishes:

  • BlackCoated
Click here for Information & Pricing

Gate Latch, 3 Inch Ring

Gate Latch, 3 Inch Ring
  • Ring gate latch operates with simple lever action by twisting the ring.
  • Ring diameter is 3.25".
  • Strike bar measures 1" by 5.5".
  • Fits gate or door up to 3" thick. Gate spindle is easily cut with a hacksaw. Cut spindle approximately 1" longer than gate is thick.
  • Made from steel base material.
  • Available in two finishes; Blackcoated or Galvanized. Galvanized finish is heavy true galvanizing, not light zinc chromate plating. Galvanized finish model is suitable for use near sea coasts.
  • Matching wood screws are included.

Finishes:

  • BlackCoated
  • Galvanized
Click here for Information & Pricing

Gate Slide Bolt, Stainless Steel

Gate Slide Bolt, Stainless Steel
  • Stainless steel slide bolt secures gates and garage doors.
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Measures approximately 6.5" by 2.25"
  • Strike plate can be mounted either as a surface mount or edge mount plate.
  • Includes stainless steel screws and 1/4" by 2.5" stainless steel carriage bolts.
  • Bolt can be locked in either the open position or the closed position with a padlock.
  • Diameter of slide bolt is just under 3/8"
  • Made from solid stainless steel (Type 304)

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Gate Bolt, Stainless Steel

Gate Bolt, Stainless Steel
  • Stainless steel bolt is very high quality and secures gates and garage doors.
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Available in three sizes; Large measures 5-1/4" by 2-3/4". Small measures 4" by 2-1/4". Mini measures 2-3/4" by 1-1/2".
  • Two different strike plates are included. The strike can either be surface mounted or edge mounted.
  • Includes stainless steel screws.
  • Bolt can be locked in either the open position or the closed position with a padlock.
  • The bolt on the "small" size is .350" in diameter. The bolt on the "large" size is .475" in diameter. The bolt on the "mini" size is .250".

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Gate Slide Bolt, Black

Gate Slide Bolt, Black
  • Slide Bolt for gates, barns, sheds and garages.
  • Made for flush installation on both right and left hand swinging doors. May be used on both in-swinging and out-swinging doors.
  • Measures approximately 6.25" by 2.25".
  • Slide bolt can be locked by attaching a padlock.
  • Made from steel base material.
  • Matching black fasteners are included.

Finishes:

  • Black coated
Click here for Information & Pricing

Barrel Bolt, 5 Inch Stainless Steel

Barrel Bolt, 5 Inch Stainless Steel
  • Barrel bolt is made of heavy duty solid stainless steel.
  • Made from solid stainless steel (Type 304)
  • Bolt measures 5.5" long by approximately 3/4" in diameter.
  • The bolt housing and surface strike measure 6-3/8" by 2-3/4" (as shown in photo).
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • The bolt can be locked with a padlock in the locked position.
  • A surface mounted strike plate and an edge mounted strike plate are included. Stainless steel screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from Hardware Source and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products