Key Lockable Latches for Gates

Key Lockable Latches for Gates

  • Over 40 different gate latches and locks in this section.
  • All latches in this section can be locked with a key.
  • Includes gate deadbolts, gate knobsets, gate nightlatches
  • Hasplock, Z lock and Lokk Latch by D & D technologies.

Gate Latch, Key Lockable

Gate Latch, Key Lockable
  • Gate latch made for all gate materials
  • Locking/Latching Function
    • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
    • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
    • This latch installs only on the "pull" side of the gate.
    • This latch can be locked with the key or unlocked with the key, only only on the "pull" side of the gate.
    • When not locked with the key, the latch can be released by pushing up on the lever on the "pull" side of the gate.
  • This model gate latch has side legs which wrap around the fence post and edge of gate 1" for added strength
  • Made from molded polymer with stainless steel components
  • Available in two colors; Black or White.
  • This gate latch is not handed, it can be used on both left hand and right hand gates.
  • Comes complete with instructions, fasteners and 2 keys
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.

Finishes:

  • Flat Black
  • White
Click here for Information & Pricing

LokkLatch Magnetic Gate Lock

LokkLatch Magnetic Gate Lock
    • Newest Magnetic Gate Latch from D&D Technologies
    • For gates with a square post where the gate post and gate frame close flush.
    • Works on gate and post thicknesses that range from 1.5" to 6".
    • Works on a gap between gate post and gate frame of from 3/8" to 1-1/4".
    • Fits metal, wood and vinyl gate materials.
    • Complete installation instructions are included.
    • Made from molded polymer with some internal steel components.
    • Available in two models
      • SKU 928406 are shipped with locks that are keyed to different keys
      • SKU 928064 are shipped with locks that have the same key.
    • Uses the "Kwikset" key type. Two keys are included. The locks may be re-keyed by any locksmith. Keys may be duplicated using the Kwikset key blank.
    • After installation, the latch can be adjusted both vertically and horizontally.
    • Features an intuitive PUSH/PULL action.
    • Fasteners are concealed to improve the beauty of the gate. Installation fasteners are included with the lock.
    • Locking/Latching Function
      • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
      • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
      • The latch installs on the "pull" side of the gate.
      • This latch can be locked with the key or unlocked with the key, on the "pull" side of the gate AND the "push" side of the gate.
      • Once the latch is locked on one side of the latch it is locked on both sides of the latch.
      • Once the latch is unlocked on one side of the latch it is unlocked on both sides of the latch.
Click here for Information & Pricing

Lokk Latch Combo

Lokk Latch Combo
  • This model gate latch has the feature of being able to open or lock the gate from the outside of the gate with a key (with limitations, please read below for more specific information).
  • It will fit gate posts ranging from 1" thick to 6" thick.
  • One size fits metal, vinyl and wood gates (fits vinyl radius corners).
  • This model gate latch has a side leg which wrap around the fence post 1" for added strength.
  • Made from molded polymer with stainless steel components.
  • Locking/Latching Functions for this Product
    • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
    • The latching mechanism installs on the "pull" side of the gate.
    • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
    • Functions from the "pull" side of the gate:
      • You can lock the gate with the key
      • You can unlock the gate with the key
    • Functions from the "push" side of the gate:
      • If the gate is not locked, you can use the push button toopen the gate (good for tall gates that you cannot reach over).
      • If the gate has previously been locked on the "push" side of the gate (and has not been locked on the "pull" side of the gate), you can unlock the gate.
      • This is the main limitation of this latch. If the gate has been locked from the "pull" side, you cannot unlock the gate from the "push" side.
  • For right or left hand in-swinging gates.
  • Comes complete with instructions, fasteners and 2 keys
  • Available in two colors; Black or White.
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.

Finishes:

  • Flat Black
  • White
Click here for Information & Pricing

Gate Latch for Round Posts

Gate Latch for Round Posts
  • Latch is made for round post gates and fences such as chain link fences.
  • Specially designed to fit posts and gates of different diameters. Fits both 1-3/8" and 1-5/8" gate frames. Fits 1-7/8" to 2", 2-3/8" and 2-7/8" fence posts.
  • Made from tough, glass-reinforced polymer construction with stainless steel components. Latch is strong and 100% rust free.
  • The"Latch & Access Button" model includes a keyed Access Button which installs on the opposite side of the gate.
  • Locking/Latching Functions for this Product
    • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
    • The latching mechanism installs on the "pull" side of the gate.
    • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
    • Functions from the "pull" side of the gate:
      • You can lock the gate with the key
      • You can unlock the gate with the key
    • Functions from the "push" side of the gate:
      • If the gate is not locked, you can use the push button to open the gate (good for tall gates that you cannot reach over).
      • If the gate has previously been locked on the "push" side of the gate (and has not been locked on the "pull" side of the gate), you can unlock the gate.
      • This is the main limitation of this latch. If the gate has been locked from the "pull" side, you cannot unlock the gate from the "push" side.
  • The minimum allowed gap between the fence and post is 1" and the maximum allowed gap is 2".
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.

    Finishes:

    • Flat black
Click here for Information & Pricing

Lokk Latch Deluxe

Lokk Latch Deluxe
  • This high quality gate latch allows the gate to be latched or locked from both sides of the gate.
  • Locking/Latching Function
    • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
    • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
    • The latching mechanism installs on the "pull" side of the gate.
    • The push button mechanism installs on the "push" side of the gate.
    • The lock can be locked or unlocked from either side of the gate.
    • From either side of the gate, the lock can be put in an "always locked" position or an "always unlocked" position by using the key.
  • Made from high tech rust free materials; super strong polymer contruction and 316 stainless steel components.
  • Available in two colors; Black or White.
  • Fully adjustable (both vertically and horizontally) for easy installation. Fits gate posts up to 6".
  • The lock cylinder uses a Kwikset keyway. The cylinder may be rekeyed by your locksmith to your Kwikset type house keys.
  • Made for wood, metal and vinyl gate materials.
  • Includes instructions, mounting fasteners and 2 keys.
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.

Finishes:

  • Flat Black
  • White
Click here for Information & Pricing

Lokk Latch Pro SL

Lokk Latch Pro SL
  • This is the Lokk Latch Pro., made by D & D Technologies. It is a gate latch mainly for commercial uses.
  • Locking/Latching Function
    • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
    • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
    • The latching mechanisminstalls on the "pull" side of the gate.
    • This latch automatically locks the gate when the gate is closed.
    • The gate can be unlocked with the key from either side of the gate, allowing the gate to be opened.
    • Once the gate is closed it cannot be reopened except by using the key.
  • PLEASE NOTE: This latch automatically locks the gate when the gate is closed. A key is always needed to open a gate that has this latch installed. This feature makes this latch ideal for apartments, condos, gated communities, and other commercial properties.
  • Lock can be rekeyed by your locksmith to any key that uses the Kwikset keyway.
  • Fits posts up to 6" in thickness.
  • Available in two different models; one model is for Metal & Wood gates, the other model is for Vinyl Gates.
  • Made from tough glass reinforced polymer material with stainless steel internal parts. Polymer is UV stabilized.
  • Includes instructions, fitting jig, 2 keys and all necessary mounting fasteners.
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.

Finishes:

  • Black
Click here for Information & Pricing

Gate Latch, Z Lokk, Lever Action

Gate Latch, Z Lokk, Lever Action
  • "Z Lokk" by D & D Technologies is a magnetic gate lock for metal picket-style gates. This lock uses the magnetically triggered lock design by D & D Technologies.
  • Lever design allows easy one handed operation. Lock complies with ADA (Americans with Disabilities Act) requirements.
  • Locking/Latching Function
    • Gates have a "pull" side (pull on gate to open) and a "push" side (push on gate to open).
    • Typically, the "push" side of the gate is the outside of the gate (or the street side) and the "pull" side of the gate is the inside (or yard side).
    • The latch installs on the "pull" side of the gate.
    • This latch can be locked with the key or unlocked with the key, on the "pull" side of the gate AND the "push" side of the gate.
    • Once the latch is locked on one side of the latch it is locked on both sides of the latch.
    • Once the latch is unlocked on one side of the latch it is unlocked on both sides of the latch.
  • Lock may be rekeyed by a locksmith to match other locks with the Kwikset keyway.
  • Fits gate frames up to 2-1/2". Adapter spacers are included to fit different gate frame widths.
  • The gap between the fence and post should be between 3/8" and 1-1/4". The ideal gap for this lock is 3/4".
  • Easy to install, no special tools required. Lock provides up to 1/2" vertical adjustment and 5/8" horizontal adjustment during and after installation.
  • Super strong, engineering polymer and stainless steel construction.
  • All fasteners are included.
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.
  • PLEASE NOTE: this lock is not recommended for child safety gates.

Finishes:

  • Black Polymer
Click here for Information & Pricing

Gate Latches, Child Safety Magna Latch

Gate Latches, Child Safety Magna Latch
  • These magnetically triggered gate latches are ideal for safety gates around swimming pools and child safety areas such as childcare centers.
  • For metal, wood and vinyl gates.
  • Available in two sizes, the "Vertical Pull" model for taller gates (ideal gate height is 60") and the "Top Pull" model for shorter gate heights (ideal gate height is 48").
  • For gates where the gap between the gate and post is from 3/8" to 1-7/16". If your gap is larger (1-1/2" to 2") order the gap spacer kit (SKU 928026).
  • The ideal gate height keeps the release knob out of reach of small children.
  • The latch can be adjusted (both horizontally and vertically) after installation.
  • Latch has built in key operated lock.
  • Includes mounting fasteners and 2 keys.
  • These latches can be installed on a round post gate and fence with SKU 928025 which is our Round Post Adaptor Kit. The adaptor kit will accomodate diameters from 1-3/8" to 2-5/8".
  • In case of loss or breakage, we offer a replacement strike for this product (SKU 928037).
  • Always check with your building department for your local building code requirements before installing in swimming pool areas.

Finishes:

  • Flat Black
Click here for Information & Pricing

Strike only for Top Pull and Vertical Pull Gate Latch

Strike only for Top Pull and Vertical Pull Gate Latch
  • Strike only for D & D Top Pull Gate Latch and D & D Vertical Pull Gate Latch.
  • Replacement strike for our SKU's 928022 and 928024.
  • Made from high tech black polymer.
  • Uses 6 each #8 pan head stainless steel screws (not included but offered for purchase during checkout).
Click here for Information & Pricing

Side Pull Magna Latch

Side Pull Magna Latch
  • Available in two models
    • Non-Key Lockable (SKU 928020)
    • Key Lockable (SKU 928405)
  • A small unobtrusive magnetic latch for general purpose use on gates around house and garden
  • Gate and fence gap should not exceed 3/8" and the face of the gate and fence should be aligned for the latch to work properly.
  • If gate and fence are properly aligned the strong magnetic action of the latch will cause the gate to self lock when it closes. Best when used with self closing spring hinges.
  • The Non-Key Lockable Model (SKU 928020)latch is not recommended for gates protecting swimming pools, as it is a latch that can easily be opened by a child.
  • Made from quality molded polymers with a stainless steel bolt and spring.
  • Uses 4 each #10 pan head screws (not included but offered for purchase during checkout)
  • To view Key Lockable Model (SKU 928405) click on link below.
  • Always check with your building department's local building code requirements before installing in swimming pool areas. And please remember that swimming pool gates must be checked on a regular basis to make sure that they are functioning properly in order to keep small children out of the swimming pool area.

Finishes:

  • Flat Black
Click here for Information & Pricing

Gate Deadbolt with Square Stainless Steel Trim

Gate Deadbolt with Square Stainless Steel Trim
  • Deadbolts for gates with exterior trim pieces made from stainless steel.
  • Available in Single Cylinder or Double Cylinder.
    • The Single Cylinder model is shown in the image. It has a Turn Knob side and a Cylinder side. It has a keyed side for the outside of the gate and a turn knob for the inside of the gate.
    • The Double Cylinder model has two Cylinder sides (keyed on both sides).
  • Installation:
    • For gate thicknesses of 1-3/8" to 1-3/4".
    • Installs in a 2-1/8" round hole.
    • Made to fit a 2-3/8" backset.
  • Dimensions
    • Square trim plate is approximately 2.5" by 2.5"
    • Projection on Cylinder side Square trim plate is 5/8".
    • Projecton on Turn Knob side Square trim plate is 3/8".
    • Turn knob projects 1-1/4".
  • Both locks use the common Schlage keyway.Two keys are included.
  • All screws and hardware necessary for installation are included.
  • PLEASE NOTE; the inside workings of these locks are not made from stainless steel. We do not know of any dead bolt system that is made from 100% stainless steel, inside and out. We offer these items for gates because they offer much better corrosion resistance than other dead bolts where the outside trim pieces are made from plated steel.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Gate Nightlatch

Gate Nightlatch
  • Nightlatch function allows gate to automatically latch when it is closed.
  • Nightlatch is available in two models; single cylinder and double cylinder.
  • The single cylinder model has a turn knob on the inside and a keyed cylinder on the outside of the gate.
  • The double cylinder model has a keyed cylinder on both sides of the gate.
  • Comes complete with all fasteners needed for installation and installation instructions.
  • Fits gates or doors with a thickness of 1-3/8" to 1-3/4".
  • Cylinder is keyed to the Schlage keyway and may be rekeyed (by a locksmith) to fit your existing keys if you have Schlage type keys.

Finishes:

  • Satin Chrome
  • Oil Rubbed Bronze
  • Polished Brass
Click here for Information & Pricing

Gate Deadbolt with Stainless Steel Exterior Trim

Gate Deadbolt with Stainless Steel Exterior Trim
  • Deadbolts for gates with exterior trim pieces made from stainless steel.
  • Available in Single Cylinder or Double Cylinder.
  • Double Cylinder model is keyed on both sides.
  • Single Cylinder model has a keyed side for the outside of the gate and a throw knob for the inside of the gate.
  • For gate thicknesses of 1-3/8" to 1-3/4".
  • Installs in a 2-1/8" round hole.
  • Both locks use the common Schlage keyway.
  • All screws and hardware necessary for installation are included.
  • PLEASE NOTE; the inside workings of these locks are not made from stainless steel. We do not know of any dead bolt system that is made from 100% stainless steel, inside and out. We offer these items for gates because they offer much better corrosion resistance than other dead bolts where the outside trim pieces are made from plated steel.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Gate Night Latch, Builders Series

Gate Night Latch, Builders Series
  • Our Builders Series products are value priced but still offer good quality.
  • This lock is similar to a dead bolt, however instead of a bolt that must be manually operated by turning a key or knob, this lock has a latch which automatically latches the door when the door is closed.
  • Available in two finishes:
    • Satin Chrome
    • Oil Rubbed Bronze
  • Available in two models
    • Single cylinder, has a keyed cylinder on one side and a turn knob on the other.
    • Double cylinder, has a keyed cylinder on both sides of the lock.
    • The Double cylinder secures the gate from someone reaching over the top of the gate or through an opening in the gate.
  • Comes complete with installation instructions and all fasteners needed for the installation.
  • Fits gates or doors with a thickness range of from 1-3/8" to 1-3/4".
  • Construction:
    • The cylinder is made from brass with some steel internal parts
    • The latch is made from steel, die cast material and some brass.
    • The trim pieces are made from steel.
    • The fasteners are made from steel.
    • The keys are made from brass.
  • Door Preparation
    • Uses a latch bore diameter (into the edge of the door) of either 15/16" or 1".
    • Uses a cylinder bore diameter (through the door) of 1-1/2".
    • Uses a backset dimension of either 2-3/8" or 2-3/4" (latch is adjustable).
  • Keys:
    • Comes with 2 keys
    • Uses the Schlage keyway. If you have other Schlage keys in your household, your locksmith can re-key this lock to match your other locks.

Click here for Information & Pricing

Gate Deadbolt

Gate Deadbolt
  • Deadbolt for gate installs in a 2-1/8" round hole.
  • Available in Single cylinder or Double cylinder.
  • Double cylinder deadbolt is keyed on both sides
  • Single cylinder deadbolt has a keyed side for the outside of the gate and a throw knob for the inside of the gate.
  • For door thicknesses of 1-3/8" to 1-3/4"
  • Both locks use the common Schlage keyway.
  • Available in Oil Rubbed Bronze or Flat Black finish. Oil Rubbed Bronze is shown in photo.
  • All screws and hardware necessary for installation are included.

Finishes:

  • Oil Rubbed Bronze
  • Flat Black
Click here for Information & Pricing

Gate Deadbolt with Keyhole Cover, Bronze

Gate Deadbolt with Keyhole Cover, Bronze
  • Gate deadbolt features decorative style and flip-down keyhole cover.
  • Deadbolt installs in a 2-1/8" round hole.
  • Available in Single cylinder or Double cylinder.
  • Double cylinder deadbolt is keyed on both sides
  • Single cylinder deadbolt has a keyed side for the outside of the gate and a throw knob for the inside of the gate.
  • For door thicknesses of 1-3/4" to 2"
  • Both locks use the common Schlage keyway.
  • The outside trim pieces are made from sandcast bronze. The cylinder is made from solid brass. The strike and face plate are made from solid brass. The bolt is made from hardened steel. There are some steel internal parts.
  • Rectangular trim plates measure 3" tall by 2-3/8" wide.
  • All screws and hardware necessary for installation are included.

Finishes:

  • Bronze
Click here for Information & Pricing

Lock Boxes for Metal Gates

Lock Boxes for Metal Gates
  • Lock box is made for a metal or iron gate.
  • Features a Bolt Guard for extra security.
  • Installs by welding in place to metal gate.
  • Available in a "Single" or "Double" model.
  • The single model will hold either a tubular style front door lock or a deadbolt
  • The double model will hold a dead bolt and a tubular style front door lock.
  • The single model's overall measurements are; 5-3/4" wide by 3-1/2" tall by 1-5/8" thick.
  • The double model's overall measurements are; 5-5/8" wide by 6-7/8" tall by 1-5/8" thick.
  • The backset of the holes on both models is 2-3/8".
  • Both models have a 2-1/8" hole diameter.
  • The "center to center" dimension of the Double hole model is 3-3/8".
  • Made from steel base material (unpainted)
Click here for Information & Pricing

Surface Mounted Rimlock with Long Throw

Surface Mounted Rimlock with Long Throw
  • Surface mounted locking slide bolt for gates.
  • Locks and unlocks from the outside of the gate with a key.
  • Locks and unlocks from the inside with a push button.
  • Lock and strike plate mounts to the surface of the gate and gate post.
  • Installation requires a 1-1/32" diameter hole drilled through the gate for the brass lock cylinder.
  • Maximum gate thickness is 2" (the length of the brass lock cylinder).
  • Throw of lock bolt is 2-7/8".
  • Lock is reversible, works on left-hand opening and right-hand opening gates.
  • Includes lock, strike plate, 3 keys, mounting screws and a round brass trim plate which fits over the brass lock cylinder showing on the outside of the gate.
  • Keys and lock cylinder are solid brass. Bolt is zinc chromate plated steel. Lock housing is coated with a black rust resistant finish.
  • Please note that this product is now only available with a black lock housing.
Click here for Information & Pricing

Vertical Hasp for Gates and Doors

Vertical Hasp for Gates and Doors
  • Hasp and Staple for Gates, Doors, Chests, etc.
  • Ideal for narrow gate posts or narrow door frames.
  • Vertical mounting plate needs a minimum width of 2-5/8" for installation on the gate post or door frame.
  • Does not include padlock.
  • Dimensions:
    • Width of vertical mounting plate including barrel: 2-1/2"
    • Height of vertical mounting plate: 6-1/16"
    • Staple mounting plate: 2-1/8" high by 2-5/8" wide.
    • Hasp locking plate, not including barrel: 3-1/2" by 2-1/8"
    • Material thickness: 3/16"
    • Staple projection: 1-3/4"
  • Made from steel and black coated.
  • Fasteners are included;
    • Black wood screws
    • Two zinc plated 3" carriage bolts and nuts
Click here for Information & Pricing

Regular Padlock Eyes

Regular Padlock Eyes
  • Padlock eyes are a simple way to add padlock security to a gate or door.
  • Sold by the pair (two padlock eyes).
  • Simply attach one eye to the gate post and one eye to the edge of the gate.
  • Accepts all sizes of padlocks.
  • Each eye measures 2-1/8" by 1-7/8".
  • The oval padlock eye is approximately 3/4" by 7/8".
  • Flat head wood screws are included.
Click here for Information & Pricing

Right Angle Padlock Eyes

Right Angle Padlock Eyes
  • Right Angle Padlock Eyes
  • Padlock eyes are a simple way to add padlock security to a gate or door.
  • Sold by the pair (two padlock eyes as shown in photo).
  • Simply attach one eye to the face of the gate post and one eye to theface of the gate.
  • Accepts all sizes of padlocks.
  • The mounting plate of each eye measures 2-1/8" by approximately 7/8".
  • The oval padlock eye is approximately 5/8" by 3/4".
  • 1/2 inch long machine screws and nuts are included. May be attached using wood screws but wood screws are not included. If using wood screws we recommend using #12 pan head sheet metal screws (offered for purchase during checkout).
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from Hardware Source and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

High quality, received them promptly without special shipping. Great quality, saved over 100.00 over Home Depot. ... (Read review)
quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products