Gate Grills -Gate Handles -Gate Pulls -Gate Stops

Gate Grills -Gate Handles -Gate Pulls -Gate Stops

  • Over 30 products are found in this section
  • Gate grills allow your gate to have an opening to view what is on the other side of the gate. Also known as a speakeasy.
  • Also in this section are gate handles and gate pulls.

Pull for Gates and Doors, Solid Bronze

Pull for Gates and Doors, Solid Bronze
  • Solid bronze pull for gates and doors for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Available in two lengths; 12.5" and 17.5".
  • The 12.5" size has a screw hole center to center dimension of 11.5".
  • The 17.5" size has a screw hole center to center dimension of 16.5".
  • Attachment screws are included (Stainless steel flat head 5/16" diameter machine screws). Please specify in the comment section when you check out whether you would like your attachment screws 1-3/4" in length or 2-1/2" in length.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
  • PLEASE NOTE: We can special order these pulls so that you can mount one on each side of your door with no mounting hardware or screws visible (known as "back-to-back mounting"). Please call if you wish to order "back-to-back" mounting. We will need to know your door thickness. There is an additional charge of $30.00 for two pulls set up for "back-to-back mounting".

Finishes:

  • Solid Natural Bronze
Click here for Information & Pricing

Curved Plate Lever Turn, Solid Bronze

Curved Plate Lever Turn, Solid Bronze
  • Solid Bronze lever turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Lever turn is reversible, fits left hand and right hand doors.
  • Lever turn back plate measures 9-3/4" tall and 2-3/4" wide. Lever projection is 3-1/4".
  • Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/8".
  • Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
  • Spindle is 5" long by 5/16" square. Can be used on a maximum 1-3/4" thick door. Spindle is made from steel with a yellow zinc plating.
  • Spindle, spring latch and mounting screws are included with the lever turn.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
  • This item is sold by the "Set". A set is two lever turns (one for front of door and one for the back),one latch and strike,one spindle and all fasteners needed for installation.

Finishes:

  • Natural Bronze
Click here for Information & Pricing

Barrel Bolt, Solid Bronze

Barrel Bolt, Solid Bronze
  • Solid bronze barrel bolt is lockable with a padlock (padlock not included).
  • Bolt measures 8" long by 5/8" diameter.
  • Handle measures 4".
  • Mounting brackets are 1-3/4" by 3/4".
  • Barrel bolt surface mounts to gate or door.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

Finishes:

  • Natural Bronze
Click here for Information & Pricing

Bean Style Handle

Bean Style Handle
  • Bean style gate or door handle
  • Matches our "Bean" style thumb latch, strap hinges and dummy strap hinges.
  • Handle measures 9.5" tall by 3-3/4" wide at widest point.
  • Made from malleable iron.
  • Matching wood screws included.
  • This handle works as a dummy handle for our Bean Rim Style Gate Latch (SKU 778017)
Click here for Information & Pricing

9" Double Heart Handle

9
  • Forged Iron base material
  • Measures 9" from tip to tip
  • Stands 1-1/2" in relief
  • Matching wood screws included
  • This handle is a match and works as a dummy handle for our 9" Double Heart Thumb Latch (SKU 778140).
  • This high quality product matches our other "Forged Iron" Strap hinges and Dummy Straps

Finishes:

  • Rough Black Iron Finish
Click here for Information & Pricing

Grapevine Pull for Gates and Doors

Grapevine Pull for Gates and Doors
  • Door and gate pull with grapevine styling. Features a vine like handle with a cluster of grapes at each end and a grape leaf at each end that acts as the mounting plates.
  • Available in two sizes; medium and large.
  • The large size measures 19" from tip to tip. The handle diameter is 1". Each grape leaf mounting plate is about 5" tall by 4" wide.
  • The medium size measures 15.5" from tip to tip. The handle diameter is 3/4". Each grape leaf mounting plate is about 4" tall by 3-1/4" wide.
  • Made from steel.
  • Wood screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

8-1/2" Heart Gate Pull

8-1/2
  • Light weight heart shaped pull for gates measures 8-1/2" in length.
  • Made from 1/8" stamped steel.
  • Finished with a textured surface to resemble wrought iron.
  • Pull is 1-11/16" wide at widest point (at larger of the two hearts) and projects 1-5/8".
  • Matching black wood screws are included.
Click here for Information & Pricing

Heart Gate Pull, Medium Weight

Heart Gate Pull, Medium Weight
  • Heart style gate pull for gates, medium weight.
  • Pull is 8.5" in height, 2.25" at widest point (large heart), and projects 1-7/16".
  • Made from stamped steel base material, thickness is 1/8".
  • Finish is smooth, flat black.
  • Matching black wood screws are included.
Click here for Information & Pricing

7-3/4" Spade Style Gate Pull

7-3/4
  • Medium wieght gate handle with spade ends.
  • Handle measures 7-3/4" in height.
  • Made from stamped steel (1/8" thick).
  • Handle projection is 1-5/8".
  • Spade attachment ends are 2" wide.
  • Finish is smooth flat black.
  • Matching wood screws are included.
Click here for Information & Pricing

11" Heart Handle

11
  • Large door pull with a heart at each end
  • Measures 11 inches tall
  • Stands 2-3/8" in relief
  • Forged Iron base material
  • Matching wood screws are included
  • This high quality product matches our other "Forged Iron" Strap Hinges and Dummy Straps
  • If you need a dummy handle to match our SKU 778013 (11" Rim Gate Latch) this handle is an exact match.

Finishes:

  • Rough black iron finish
Click here for Information & Pricing

10" Heavy Iron Gate Pull

10
  • Heavy Iron handle for gates or doors.
  • Installs with 1-1/2" matching wood screws (included).
  • Made from solid steel and black coated to resist corrosion.
  • Mounting plates measure 1-7/8" by 2-1/2"
  • Grip is 1-1/8" in diameter at thickest point.

Finishes:

  • Black Coating
Click here for Information & Pricing

12" Hammered Gate Pull

12
  • Gate pull is approximately 12" tall by 1-3/8" wide at its widest point.
  • Made from steel that is 1/4" to 5/16" thick.
  • Has the look of hammered or pounded wrought iron.
  • Matching screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Twisted Bar Gate Pull

Twisted Bar Gate Pull
  • Decorative gate pull with square mounting plates and twisted bar grip.
  • Pull measures 9" from top to bottom.
  • Square mounting plates measure 2" by 2".
  • Handle projection is 3-1/4".
  • Diameter of twisted bar is 11/16".
  • Matching wood screws are included.
  • Made from steel base material.

Finishes:

  • Rust Finish
Click here for Information & Pricing

Black Twisted Bar Pull

Black Twisted Bar Pull
  • Decorative gate or door pull with diamond style mounting plates and twisted bar grip.
  • Pull measures 9-1/2" from top to bottom including mounting plates.
  • Mounting plates measure 1-1/2" wide by 2" tall.
  • Handle projection is 2-3/4".
  • Diameter of twisted bar is 3/4".
  • Made from steel base material. Wood screws are included.

Finishes:

  • Flat Black Powder Coated
Click here for Information & Pricing

10.5" Stainless Steel Gate Handle

10.5
  • Stainless steel gate handle measures 10.5" by 1.25" at widest point and 1/16" thick.
  • Great for use in marine environments or anywhere the look of stainless steel is desired.
  • Stainless steel is recommended for redwood, cedar, vinyl and ACQ (treated) lumber.
  • Made from solid stainless steel (Type 304)
  • Stainless steel lag screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Large Ring Pull for Gates

Large Ring Pull for Gates
  • Large drop ring pull for gates or doors.
  • Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
  • Diameter of ring is 5-1/4". It is made out of 5/8" diameter material.
  • Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
  • Made of steel base material.
  • Wood screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Small Ring Pull for Gates

Small Ring Pull for Gates
  • Small drop ring pull for gates or doors.
  • Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
  • Diameter of ring is approximately 3". It is made out of 1/2" diameter material.
  • Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
  • Made of steel base material.
  • Wood screws are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Small Black Twist Ring

Small Black Twist Ring
  • Decorative ring for gates.
  • Ring diameter is 3 inches.
  • Made from steel base material.
  • Matching wood screws are included.

Finishes:

  • BlackCoated
Click here for Information & Pricing

Large Black Twist Ring

Large Black Twist Ring
  • Decorative ring pull for gates.
  • Ring diameter is 4 inches.
  • Made from steel base material.
  • Matching wood screws are included.

Finishes:

  • Black Coated
Click here for Information & Pricing

Grapevine Door & Gate Grille

Grapevine Door & Gate Grille
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures 12" wide by 14-1/2" tall. Projects 4-1/2" from surface of gate or door.
  • Made from steel base material.
  • Fasteners are included.
  • PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

Finishes:

  • Black wrought iron
Click here for Information & Pricing

14-1/4" Gate & Door Grille

14-1/4
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures 12" wide by 14-1/4" tall. Projects 2" from surface of gate or door.
  • Made from steel base material.
  • Fasteners are included.
  • PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

Finishes:

  • Black wrought iron
Click here for Information & Pricing

12 Inch Speakeasy Gate Grille

12 Inch Speakeasy Gate Grille
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures approximately 11-5/8" wide by 9" tall. Projects approximately 1-1/8" from surface of gate or door.
  • Can be installed either horizonally or vertically.
  • Made from steel base material.
  • Fasteners are included.

Finish

  • Black Wrought Iron
Click here for Information & Pricing

15-5/8 Twist Grille for Gates & Doors

15-5/8 Twist Grille for Gates & Doors
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures 12" wide by 15-5/8" tall. Projects 2" from surface of gate or door.
  • Made from steel base material.
  • Fasteners are included.
  • PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

Finishes:

  • Black wrought iron
Click here for Information & Pricing

12-1/8" Flat Bar Door & Gate Grille

12-1/8
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures 10-1/4" wide by 12-1/8" tall. Projects 1-1/2" from surface of gate or door.
  • Made from steel base material.
  • Fasteners are included.
  • PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

Finishes:

  • Black wrought iron
Click here for Information & Pricing

10-1/8" Square Bar Grille for Gates & Doors

10-1/8
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures 10" wide by 10-1/8" tall. Projects 2" from surface of gate or door.
  • Made from steel base material.
  • Fasteners are included.
  • PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

Finishes:

  • Black wrought iron
Click here for Information & Pricing

10-1/4" Square Flat Bar Grille for Gates & Doors

10-1/4
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Grille measures 10-1/2" wide by 10-1/4" tall. Projects 2-1/4" from surface of gate or door.
  • Made from steel base material.
  • Fasteners are included.
  • PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

Finishes:

  • Black wrought iron
Click here for Information & Pricing

Solid Bronze Gate Grill

Solid Bronze Gate Grill
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Solid bronze gate and door grill for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Grill measures 14-1/4" by 14-1/4" and is made from 1/2" square solid bronze.
  • Gate grille covers up a speakeasy opening on your gate or door.
  • Wood screws are included.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

Finishes:

  • Solid Natural Bronze
Click here for Information & Pricing

Gate Stop for Metal Gates

Gate Stop for Metal Gates
  • Gate stop acts to stop gate properly and helps keep gate from slamming shut.
  • Integrated rubber buffer softens gate slam and reduces noise.
  • Requires a minimum of 5/16" gap between gate and post.
  • Molded reinforced polymer construction.
  • For gates higher than 4 feet use two Gate Stops (located near top and bottom of gate).
  • Uses 3 each #8 pan head sheet metal screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

  • Flat Black
Click here for Information & Pricing

Polymer Gate Handle

Polymer Gate Handle
  • Fits all types of gates and materials.
  • Fits right and left hand opening gates.
  • Requires a minimum 5/32" gap between gate and gate post.
  • Made from tough molded polymers, will not rust or stain.
  • Fasteners are included.

Finishes:

  • Flat Black
Click here for Information & Pricing

Gate Stop for Wood & Vinyl Gates

Gate Stop for Wood & Vinyl Gates
  • Gate stop acts to stop gate properly and helps keep gate from slamming shut. Made for gates made of wood or vinyl.
  • Integrated rubber buffer softens gate slam and reduces noise.
  • Requires a minimum of 7/16" gap between gate and post.
  • Molded reinforced polymer construction.
  • For gates higher than 4 feet use two Gate Stops (located near top and bottom of gate).
  • Uses 5 each #12 round head wood screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

  • Flat Black
Click here for Information & Pricing

Solid Bronze Gate Stop

Solid Bronze Gate Stop
  • Solid bronze gate stop will stop gate in the closed position. The installation of a gate stop prevents damage to your gate latch by stopping the gate before it hits the latch bar. Bronze latch bars will become weakened and eventually break if gates are allowed to slam against them.
  • Gate stop measures 2" tall by 2" wide with a 1.5" projection.
  • Mounting screws are included.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

Finishes:

  • Natural Solid Bronze
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
High quality, received them promptly without special shipping. Great quality, saved over 100.00 over Home Depot. ... (Read review)
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products