• A cane bolt can be used to secure one of the gates when you have a double gate. Once the first gate is secured, the second gate can be latched to the first gate with a gate latch.
• A cane bolt can also be used to secure any gate in the open position.
• Made from 1/2" steel and available in powder coated black or galvanized.
• These canebolts feature a stop which will hold it in the "up" position.
• Our galvanized coating is a true heavy galvanized coating, not the typical light zinc chromate plating.
• Comes with two hanging guides and a strike plate.
• Fasteners are included.

Finishes:

• Black
• Galvanized

• Heavy duty cane bolt.
• Made from 5/8" diameter steel.
• Coated with a durable black powder coating.
• The photo is of the 24" size cane bolt. The hardware for the 36" and 48" cane bolts is different from what is shown in the photo.
• The 24" size comes with matching wood screws, two hanging guides, a round strike and a hanger for holding the cane bolt in the "up" position.
• The 36" and 48" size comes with matching wood screws, two hanging guides, a flat rectangular strike and a hanger for holding the cane bolt in the "up" position. The hanging guides are on flat plates approximately 2-1/8" by 1-1/4" . The hanger is on a flat plate approximately 2" x 4-1/4".

Finishes:

• Black

• Heavy duty cane bolt for all metal, wood or vinyl gates. Ideal for double driveway gates.
• Lokk Bolt is made by D & D Technologies.
• "Metal Model" is for metal gates. "Wood/Vinyl Model" is for wood or vinyl gates.
• Made from tough polymer construction
• Built in keyed lock. Can be re-keyed by a locksmith to any Kwikset type key.
• Rod is 24" in length, 1/2" in diameter and made from 316 grade stainless steel
• Bolt retention groove keeps the bottom of the cane bolt from dragging across your driveway (holds cane bolt in the up position).
• Cane bolts are not handed. They will work on both left hand and right hand opening gates.
• Comes complete with all fasteners and 2 keys.

Finishes:

• Flat Black

• For gates or doors around a pool, in a marine or corrosive environment, or for a satin nickel or stainless steel look.
• Made from 18-8 stainless steel
• Bolt is 24" in length and 5/8" in diameter.
• Supplied with two guides and a hanger made from 11 gauge stainless. Hanger holds cane bolt in the "up" position.
• Uses 6 each #14 Pan head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

• Mill finish

• Solid bronze cane bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
• Cane bolt measures 20" tall. Mounting plates measure 2" by 4".
• Cane bolt features a large diameter 5/8" bolt.
• Cane bolt features a stop which allows the cane bolt to be held in the "up" position.
• Wood screws and a keeper for the bottom of the bolt are included.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

Finishes:

• Solid Natural Bronze

• Heavy duty cane bolt (gate anchor) for livestock and other gates.
• Cane bolt features a spring loaded brake which will hold the cane bolt in any position. This can be used to keep the gate from swinging or sagging. To release the bolt simply push down on the lever.
• Bolt measures 17" tall by 1" diameter.
• Mounting plate measures 4-3/4" tall by 3-1/2" wide. Will mount to flat gate frame or 2" diameter round gate frame.
• U-bolts, nuts and washers are included for mounting to round gate frame. Fasteners for mounting to a flat gate frame are not included.
• Made from steel base material.
• PLEASE NOTE: green gate tubing shown in photo is for illustrative purposes and is not included with cane bolt.

Finishes:

• Zinc Chromate (plate) and Yellow Zinc (bolt)

• Heavy duty cane bolt for wood, metal and vinyl gates.
• QBolt is made by D & D Technologies.
• Made from 9/16" diameter stainless steel material and coated with a black powder coating.
• Can be locked in either the up or down position with a padlock. Pad lock is not included.
• Brackets are made from high tech polymer.
• Available in two models: one is for wood and vinyl gates, one is for metal gates.
• Available in two lengths: one is 24" in length and one is 40" in length.
• Cane bolts are not handed. Can be used on left or right hand opening gates.
• Comes complete with black mounting screws.
• PLEASE NOTE; because the attachment brackets wrap around the edge of the gate, your gate must have at least a 1/4" gap and your gate must be at least 1" thick for the brackets to attach properly.

• Chain bolt for gates, doors, etc.
• The chain bolt may be used on the top or bottom of the gate or door, or on both the top and bottom (if two are purchased).
• Chain bolt provides a method of securing a gate or door in the open (or closed) position.
• The bolt is made of 5/8" square steel. It is spring loaded and it is beveled on the latching end. The bevel allows thebolt to automatically retract and then lock when the bolt hits the strike.
• The strike is also beveled to help the bolt retract.
• An 18" chain is attached. The chain is used to release the bolt from the strike, thereby freeing the gate or door.
• Dimensions of chain bolt:
  • Throw of bolt is 7/8".
  • Mounting plate measures 2" x 7-3/8".
  • Projection is 3/4"
• Included are mounting screws, strike and chain bolt.
• Mounting plate and its screws are black powder coated. Bolt, strike, chain and strike screws are zinc plated.

• Large Foot Bolt holds gates and doors in the open position.
• Foot bolt easily engages and retracts by pressing your foot on one of two foot pads.
• Made from steel, housing is black powder coated, bolt and foot pads are galvanized.
• Includes 2" by 2" strike plate and black coated fasteners.
• Housing measures 2" by 7-3/8". Projection is 3-1/4".
• Bolt measures 5/8" by 5/8". Throw of bolt is 1".

• Cane bolt is used to secure gates and doors in closed position
• Matches our black iron hardware
• Comes with 3 different strikes for mounting on edge, surface or jamb
• Throw of bolt is 1-1/2"
• Cane bolt mounting plate measures 6" x 1-1/2"
• Overall length of cane bolt is 14"
• Cane bolt features a flat friction spring which allows the bolt to hold in any position.
• Matching black screws are included

Finishes:

• Black Iron

• Cane bolt is used to secure gates and doors in closed position
• Cane bolt is 18" long (22" including handle)
• Matches our other black iron and heart design hardware
• Installs with two black screw eyes and six black wood screws (included)
• Comes with a cup type strike
• The throw of the cane bolt is determined by where you install the top heart

Finishes:

• Black Iron

• Cane bolt is used to secure gates and doors in closed position
• Matches our black iron hardware
• Comes with four different strikes for mounting on edge, surface, jamb or floor
• Throw of bolt can be varied depending on installation
• Matching black wood screws are included
• Overall length of cane bolt is 22-3/4"
• Mounting plates are 4" x 1-1/2"

Finishes:

• Black Iron

• Gate wheel helps support unhinged end of gate.
• Wheel is 2-3/4" diameter and made of hard plastic. Wheel width is 1-1/4".
• Overall top to bottom measurement is 16".
• Wheel is attached to a ball bearing swivel for ease in rolling.
• Approximate 50 lbs capacity.
• Mounting plate is undrilled. Holes may be added by installer or it may be welded in place. Mounting plate measures 1-3/8" by 9-3/8" by 1/8".
• Maximum spring travel is 1".
• Made from steel and unfinished. Should be painted after installation.
• If installing on a wood gate, 5/16" lag screws are recommended and offered for purchase during checkout.

Finishes:

• Unfinished

• Gate wheel helps support the unhinged end of larger gates.
• Mounts to either the front or back side of the gate.
• Spring loaded to help absorb bumps in surface under gate.
• Features ball bearings, hard rubber wheel and a heavy duty spring.
• Mounting plate measures 2" wide by 5" high.
• Made from steel base material.
• Wheel diameter is 2-1/2". Overall height of product is 10-1/2".
• Wheel is attached to a swivel for ease of rolling.
• 75lbs load capacity
• Maximum spring travel is 1-1/2"
• This product uses 5/16 lag screws (not included). Lag screws are offered for purchase during checkout. Order 4 screws per gate wheel.

Finishes:

• Zinc Chromate plated

• Gate wheel helps support unhinged end of large gates.
• Thick galvanized finish (true galvanizing not a thin zinc plating).
• Non-swiveling for extra strength.
• Made from steel base material.
• Approximate 88lb load capacity.
• Wheel diameter is 4". Width is 1-1/8".
• Top to bottom measurement is 14.5".
• Mounting plate measures 1.5" x 6.5"
• Maximum spring travel is 2.5"
• Includes 2 each 3/8" x 4-3/4" galvanized carriage bolts, nuts and washers (fully threaded).

Finishes:

• Galvanized

• Gate wheel attaches to gates that have a round gate frame.
• Fits gate tubing sizes 1-5/8" to 2" (outside diameter).
• Wheel diameter is 8". Wheel width is approximately 1-3/4". Wheel has a steel center and is made from solid rubber.
• Includes U-shaped attachment plate for 2" O.D. tubing with adapters for 1-5/8" O.D. tubing. Also included are carriage bolts and nuts.
• The addition of this gate wheel to your gate will add approximately 2.5" to the end of your gate.
• PLEASE NOTE; green gate tubing shown in photo is for illustrative purposes and is not included with gate wheel.

Finishes:

• Zinc Chromate Plated

• Stainless steel spring gate closer. For use in marine environments or anywhere the look of stainless steel is desired.
• Safe for use on redwood, cedar, vinyl and treated lumber (ACQ Lumber).
• Works for both right hand and left hand opening gates.
• Torque is adjustable.
• Installs on the same side of the gate as the hinges. In the case of full mortise butt hinges it installs on the same side of the gate as the hinge pins.
• Stainless steel screws are included.

Finishes:

• Stainless Steel

• Ornamental gate spring closes gate automatically
• Works for both right or left hand opening gates
• Torque is adjustable
• Matching wood screws are included
• Spring closer installs on the same side of the gate as the hinges (or hinge pin for full mortise hinges)
• Steel base material

Finishes:

• Black coated
• White coated

• Kant Slam Manufacturing Company.
• Closes large or small gates up to 150 lbs, easily, gently, smoothly.
• Will not slam your gate.
• Not designed for high frequency gates.
• Complies with most pool gate legislation restrictions (check your local ordinance).
• Adjusting screw regulates closing speed.
• PLEASE NOTE: For the closer to work properly the surface of the post(where thecloser is attached) must be flush with the surface of the gate.
• Installs on side, top, middle or bottom of right or left hand gate.
• Mounts on opening side of door.
• Kant Slam closer has a maximum opening angle of 90 degrees. The manufacturer recommends the use of a stop at 90 degrees to prevent damage to the Kant Slam closer.
• Hydraulic action gives ample closing force at the latching point.
• Overall dimensions 7-1/2" high, 13" wide, 2-1/2" deep.
• Mounting bracket measures 3-1/4" by 1-3/4".
• Steel base material.
• Screws are included.

Finishes:

• Black coated

• GC-2000 Gate Closer for gates up to 120 lbs and maximum gate width of 3'3".
• The GC-2000 offers a small profile compared to most gate closers.
• Easy installation. Closer has long service life. Not designed for commercial application.
• Designed for metal gates but also works well on wooden gates.
• Two speed closing slows gate speed as gate approaches post.
• Maximum gate opening is 90 degrees. IMPORTANT; A gate stop must be installed to limit gate swing to 90 degrees.
• Made for use on gates which are hinged by butt hinges or surface mounted strap hinges.
• Installation fasteners are included.

Finishes:

• Black semi-gloss coating.

• Old fashioned gravity type gate closer uses steel ball and gravity to close your gate.
• Includes one 5.5 lb steel ball, 5 feet of 3/16 welded chain and connection fasteners.
• Chain and ball are coated black.
• See instructions below for more information.

• Three head types available: Flat Head (countersunk) and Pyramid Head and Oval Head (countersunk)
• Flat black finish matches Forged Iron Hardware
• Made of steel base material

Finishes:

• Black