accredited business BBB
Frequently Asked Questions
  • What is a pair of hinges?

  • Can you match my screw hole patterns?

  • How much is shipping?

  • How do I estimate hinge weight capacity?

  • What about Installation Instructions?

Hinged Shelf Support, Heavy Duty

Hinged Shelf Support, Heavy Duty

Product Information & Specifications

  • Folding shelf support allows shelf to fold down when not in use.
  • Shelf will lock in place when in the horizontal (90 degree) position.
  • There are also two other locking positions: 80 degrees and 70 degrees.
  • Shelf can fold flat against the wall when not in use (0 degrees).
  • Shelf releases from the locked position by pressing on a lever which is positioned inside and at the end of the horizontal piece (lift up slightly on the shelf and press the release lever).
  • Two of these folding shelf supports will support up to a 750 lb load. when properly attached to a vertical surface. Proper attachment depends on the type of vertical surface (wood studs, masonary, etc). Proper attachment may require the use of fastener anchors, consult a fastener expert if necessary.
  • Available in two sizes: a small model and a large model.
    • Small model measurements;
      • The horizontal piece measures 11-3/4" long by 1-3/16" wide by 7/8" thick.
      • The vertical piece measures 7-7/8" tall by 3/4" wide by 7/8" thick.
      • It uses #10 pan or round head screws (8 per folding shelf support).
      • Screws are not included, but are offered for purchase during checkout.
      • After installation and when the shelf is folded in the down position, the gap between the bottom of the shelf and the wall it is attached to will be approximately 1".
    • Large model measurements;
      • The horizontal piece measures 15-3/4" long by 1-7/16" wide by 1-1/16" thick.
      • The vertical piece measures 10-11/16" tall by 15/16" wide by 1-1/16" thick.
      • It uses #12 pan or round head screws (8 per folding shelf support).
      • Screws are not included, but are offered for purchase during checkout.
      • After installation and when the shelf is folded in the down position, the gap between the bottom of the shelf and the wall it is attached to will be approximately 1-1/4".
  • Made from steel. The latching lever and mechanism is zinc plated. Available in a choice of two finishes;
    • White Powder Coated (image shows this finish)
    • Zinc Chromate (a shiny chrome-like finish)
  • This product is sold by the "each". You would normally order 2 or more for each shelf you are installing (depending on the shelf length).

FinishModelSKUPriceQtyUnit
White Powder CoatSmall701200$20.97
Each
White Powder CoatLarge701201$29.97
Each
Zinc ChromateSmall384001$19.97
Each
Zinc ChromateLarge384002$27.97
Each
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review