• European style glass door hinges for inset, overlay and twin overlay glass doors.
• Hinges feature a 94 degree opening angle and 3 dimensional adjustment.
• This hinge system requires that the glass door have a 26mm hole bored for each hinge used.
• They work with glass thicknesses of 4.5mm to 7mm (slightly under 3/16 to slightly over 1/4 inch).
• The hinge system is made up of 4 items which are ordered separately; the hinge, the cover cap, the mounting plate and the wood screws for the mounting plate.
• The hinges come in 3 types; "Straight Arm" for overlay doors, "Half Cranked" for twin overlay doors (also known as "Back-to-Back" doors, and "Full Cranked" for inset doors.
• The "Cover Caps" (required to hold glass door to hinge system) are available in 3 finishes; (Black, Chrome or Gold), and two types (Round or D-shaped). Screws to hold cover cap to hinge are included with hinge. PLEASE NOTE: the Gold D cover cap has been discontinued by Blum and is no longer available.
• All parts of the hinge and cover cap that touch the glass are plastic material.
• PLEASE NOTE: The hinges on this page require mounting plates (and screws) and cover caps to work. Please make sure to order one mounting plate and one cover cap for each hinge ordered. Cover caps are found on this page. Each mounting plate requires two screws.
• Mounting plates and wood screws are offered for purchase during checkout.

Finishes:

• Black Cover Cap
• Chrome Cover Cap
• Gold Cover Cap