• Hinge is completely concealed when door is closed
• Maximum door opening is 180 degrees
• Click on specification link below for detailed dimensions
• Hinge is sold by the each. Usually two each are needed per door.
• Made entirely of type 304 stainless steel
• Flat head stainless wood screws are included
• Maximum door size is 17-23/32" wide by 27-9/16" tall with a 7/8" door thickness. Maximum door weight for a pair of hinges is 5.72 lbs.

Finishes:

• Satin stainless steel

• hinge is completely concealed when door is closed
• opens 180 degrees
• steel base material
• hinge shown in photo is SKU 900016
• screws included

Finishes:

• Satin Brass
• Satin Chrome
• Black Epoxy

• hinge is completely concealed when door is closed
• opens 180 degrees
• made from high strength plated steel and heavy duty zinc alloy castings
• hinge shown in photo is SKU 900020
• matching screws are included

Finishes:

• Satin Brass
• Satin Chrome
• Black Epoxy

• Solid stainless steel hinges made by Soss. Suitable for marine environments, yachts, etc.
• For doors with a minimum door thickness of 1/2" or 3/4".
• Hinge is completely concealed when door is closed.
• Hinge opens a maximum of 180 degrees.
• Made from solid stainless steel.
• Matching stainless steel screws are included.
• Hinge shown in photo shows the polished stainless finish.
• PLEASE NOTE; Soss stainless steel hinges are sold by the each. You would normally need to order 2 or 3 hinges per door.

Finishes:

• Satin Stainless Steel
• Polished Stainless Steel

• Hinge is completely concealed when door is closed.
• Hinge opens a maximum of 180 degrees.
• Hinge shown in photo is SKU 900024.
• Hinges are made from high strength plated steel and heavy duty zinc alloy castings.
• Matching screws are included.
• PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.

Finishes:

• Satin Brass
• Satin Chrome
• Black Epoxy

• Light duty nylon hinge with steel linkages
• Affordable price
• Measures 1-1/4" by 1-1/4" by 15/32" thick (with hinge in closed position)
• Incorporated set screws expand wedge locks to secure in wood. No wood screws are necessary.
• For wood up to 13/16" thick
• Make mortise with a 12mm drill bit
• Sold by the each. Order 2 hinges per door.

Finishes:

• Black nylon

• Large (approx 3.25" tall) concealed hinge.
• Body is made of white polyamide, hinge face and linkage is made from Type 304 stainless steel.
• Excellent hinge for marine applications.
• Load capacity is 66lbs per pair of hinges and 110lbs for 3 hinges.
• Maximum door opening of 180 degrees.
• Uses 4 each #10 flat head screws per hinge (Not included but offered for purchase during checkout).

Finishes:

• White Polyamide with Stainless Face

• Large (approx 3.5" tall) concealed hinge.
• Body is made of brown polyamide, hinge face and linkage is made from Type 304 stainless steel.
• Excellent hinge for marine applications.
• Load capacity is 88lbs per pair of hinges and 132lbs for 3 hinges.
• Maximum door opening of 180 degrees.
• Uses 4 each #12 flat head screws per hinge (Not included but offered for purchase during checkout).

Finishes:

• Brown Polyamide with Stainless Face

• for right or left hand installations
• completely invisible from either side of the door when closed
• easy installation
• for light applications
• adjustable tensioning screw
• accurate drilling essential
• solid brass base material with brass links
• no screws needed
• PLEASE NOTE: these hinges are not recommended for vertical or load bearing applications. The manufacturer does not provide weight ratings on this product.

• Opens to 90 degrees.
• Made for use with frameless cabinets.
• Approximate size of hinge is 1-7/8" x 4-1/2".
• For full-overlay, half-overlay, or inset doors.
• When open, inside of door is flush cabinet style.
• No hole boring or mounting plates required.
• Maximum full overlay is 25/32".
• For door thicknesses 5/8" to 3/4" and side panel thicknesses of 5/8" to 7/8"
• Available in free swinging or self closing models.
• Steel base material
• Uses 8 each #6 pan head screws (not included. Screws are offered for purchase during checkout)
• For hinges with bronze finish, order 8 each #286-252 per hinge (#6 x 5/8" pan head bronze screws).

Finishes:

• Bronze plated
• Nickel plated

• Self-closing, concealed hinge.
• Made for cabinets whose doors open back-to-back. Both doors will open without interfering with each other.
• Made for use on frameless cabinets
• Opening angle is 90 degrees.
• Approximate size of hinge is 1-3/4" x 4-1/8".
• No hole boring or mounting plates required.
• For full-overlay, half-overlay, or inset doors.
• When open, the door is offset 1/2".
• Maximum full overlay is 25/32".
• When used on inset doors the maximum door thickness is 3/4".
• Steel base material.
• Uses 6 each #6 pan head screws per hinge(not included but offered for purchase during checkout).

Finishes:

• Nickel plated

• Swing up hinge for overlay cabinet doors. Hinge allows door to swing up and hold in the open position.
• For overlay doors on frameless cabinets (cabinets without a face frame).
• Spring tension is adjustable to accomodate different size and weight doors.
• Final open position may be set at either 75 degrees or 90 degrees.
• Elongated screw slots allow door to be adjusted after installation.
• Please note; the manufacturer of this product does not provide any weight rating or door size information.
• Screws are included.
• These hinges are handed. Order one "Left Hand" model and one "Right Hand" model for each door. Hinge in photo is the "Right Hand" model.

Finishes:

• White epoxy coated

• Heavy duty Lift-up hinge for overhead compartments
• Used in RV's, Kitchens, Buses, Trains, Aircraft and Furniture Built-ins
• Click on link below to see usage illustration
• Use for either 5/8" or 3/4" door thicknesses
• Recommended door size per pair of hinges is 20" by 11"
• Suggested weight capacity per pair of hinges is from 1-1/2 lbs to 8-1/8 lbs
• Hinge features positive stops in both the open and closed positions
• Surface mounted and completely invisible when installed
• Hinge holds open at 75 degrees
• Screws are not included but are offered for purchase during checkout. Each hinge uses 8 each #6 pan head screws.

Finishes:

• Nickel finish

• For "up opening" lids
• Use on hampers, piano benches, chest lids, etc.
• Surface mounted
• In the fully open position the hinge measues 6" long by 13/16" wide.
• Hinge will hold lid open at 90 degrees
• Steel base material
• Uses #4 flat head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.
• Spring action holds lid in closed position
• When lid is closed hinge is completely concealed.

Finishes:

• Nickel plated

• This heavy duty hinge allows smooth, silent, sag-free opening to 175 degrees
• Hinge surface mounts to the inside of your frameless cabinet. Small screw holes are the only holes you need to drill.
• Hinge works on 5 different applications: full overlay doors, half-overlay doors, full inset doors, and mitered corner doors (click on link below for illustrations) It also works on 3/8" inset doors with a 3/8" lip (no illustration available)
• For normal use the hinge can be used on door thicknesses up to 1"
• If used on "back-to-back" cabinets a maximum of 13/16" is recommended
• Hardened steel construction (.082 gauge steel)
• Features spring closing mechanism so cabinet latches are not necessary
• Cabinet must have at least a 4-1/8" depth. Hinge measures approximately 4" long by 1-5/8" by 2".
• Screws are not included but are offered for purchase during checkout. Each hinge uses 10 each #6 pan head screws.

Finishes:

• Nickel Plated

• Allows drop panel to fold down and hold at 90 degrees
• Fits a 35mm (1-3/8") hole
• Hinge measures 2-9/16" by 1-9/16", measured at its widest points.
• Hinge thickness is 1/2"
• Hinge is detachable and adjustable
• Zinc die cast material
• Uses #5 Flat head screws (not included)

Finishes:

• Dark bronze
• Satin Brass

• Flap hinge made by Hettich.
• For desks with a drop down front or flap.
• Allows flap to fold down and hold at 90 degrees creating a desklike worksurface.
• Hinge parts are mounted separately allowing disassembly of flap and bottom panel.
• Hinge is adjustable 3 ways after installation.
• Requires a 35mm (1-3/8") hole in the flap and bottom panel. See link below for exact hole dimensions.
• Hole edge breakout is covered by hinge lip.
• Hinge measures 2-9/16" by 1-9/16", measured at its widest points.
• Depth of hole that hinge fits into is 15/32".
• Made from precision die cast material.
• Matching wood screws are included.

• Allows panel to fold down and hold at 90 degrees
• Fits a 35mm (1-3/8") hole
• Hinge is detachable and adjustable
• Zinc die cast material
• Hinge measures 2-3/16" by 1-1/2", measured at its widest points.
• Hinge thickness is 15/32"
• Screws are not included

Finishes:

• Dark Bronze
• Nickel

• flap opens 90 degrees, flush with inside shelf
• fits flush in door & shelf surfaces, concealed from exterior
• 30mm Forstner or flat boring bit needed to install
• for 3/4" thick doors
• linkage is brass and steel
• hinge is made from nylon material
• Uses #4 x 5/8" oval head wood screws (Not included)

Finishes:

• White nylon

• Flap opens 90 degree flush with inside shelf
• Fits flush in door & shelf surfaces, concealed from exterior
• Click on link below for more install information
• Uses #3 Flat head screws (not included)
• Hinge is 3-way adjustable and detachable

Finishes:

• White plastic and Chrome plated

• Flap opens 90 degrees flush with inside shelf
• Fits flush in door & shelf surfaces, concealed from exterior
• Click on link below for more install information
• Uses #4 Flat head screws (not included)
• Hinge is 3-way adjustable and detachable

Finishes:

• Dark Bronze plated
• Nickel plated