Butler Tray Table Hinge

Butler Tray Table Hinge

  • Butler tray table hinges are made for a flush installation in a table or desk top.
  • The original use was for a small table with a handle in each flip-up leaf.
  • The ends of the table could be flipped into a vertical position for carrying.
  • Nowadays butler tray table hinges are used for short table or desk extensions.

Solid Brass Butler Tray Table Hinge

Solid Brass Butler Tray Table Hinge
  • Stop holds hinge flat in horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds up 90 degrees and stops.
  • Hinge measures 2-29/32" long x 1-1/2" wide.
  • Hinge is 5/64" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Solid brass base material.
  • Flat head wood screws are included.

Finishes:

  • Polished Brass
  • Antique Brass
Click here for Information & Pricing

Butler Tray Hinge, Stainless

Butler Tray Hinge, Stainless
  • Hinge measures 2" in the open position.
  • Hinge is 1-1/2" wide.
  • Hinge is 3/64" thick (9/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Made from Type 304 stainless steel.
  • The hinge incorporates a stop which holds the hinge flat in the horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds back a full 180 degrees onto the table.
  • Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

3-1/4" Butler Tray Hinge, Stainless

3-1/4
  • Hinge measures 3-1/4" in the open position.
  • Hinge measures 1-3/16" wide.
  • Hinge is 1/16" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Made from Type 304 stainless steel.
  • Hinge incorporates a stop which holds the hinge flat in the horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds back a full 180 degrees onto the table.
  • Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

3" Butler Tray Hinge, Stainless

3
  • Hinge measures 3" in the open position.
  • Hinge measures 1-1/2" wide.
  • Hinge is 1/16" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Made from Type 304 stainless steel.
  • Hinge has a stop which holds the hinge flat in the horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds back a full 180 degrees onto the table.
  • Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Butler Tray Hinge, Stainless.

Butler Tray Hinge, Stainless.
  • Hinge measures 3" in the open position.
  • Hinge measures 1-1/2" wide.
  • Hinge is 1/16" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Made from Type 304 stainless steel.
  • Hinge has a stop which holds the hinge flat in the horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds back a full 180 degrees onto the table.
  • Uses #8 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Butler Tray Table Hinge

Butler Tray Table Hinge
  • Stop holds hinge flat in horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds back a full 180 degrees onto the table.
  • Rounded corners.
  • Hinge measures 2-3/4" long x 1-37/64" wide.
  • Hinge is 5/64" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Solid brass base material.
  • Flat head screws (#6 x 5/8") are included.

Finishes:

  • Polished Brass
Click here for Information & Pricing

Butler Tray Table Hinge, Solid Brass

Butler Tray Table Hinge, Solid Brass
  • Hinge is an English reproduction.
  • Locks open in flat position.
  • Holds vertical at 90 degrees.
  • Square ends.
  • Hinge measures 2-1/2" long x 1-1/2" wide.
  • Hinge is 1/8" thick (3/8" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Solid brass base material.
  • Uses #5 flat head screws (not included). Flat head brass screws are offered for purchase during checkout.

Finishes:

  • Satin Brass
Click here for Information & Pricing

Butler Tray Table Hinge, Satin Brass

Butler Tray Table Hinge, Satin Brass
  • Hinge is an English reproduction.
  • Locks open in flat position.
  • Holds vertically at 90 degrees.
  • Round ends.
  • Hinge measures 3" long x 1-1/2" wide.
  • Hinge is 5/32" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Solid brass base material.
  • Uses #6 flat head screws (not included). Flat head brass wood screws are offered for purchase during checkout.

Finishes:

  • Satin Brass
Click here for Information & Pricing

2-3/4" Butler Tray Table Hinge.

2-3/4
  • Stop holds hinge flat in horizontal position.
  • Hinge mortises flush into surface of table.
  • Hinge folds back a full 180 degrees onto the table.
  • Round ends.
  • Hinge measures 2-3/4" long x 1-3/16" wide.
  • Hinge is 5/64" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
  • Solid brass base material.
  • Flat head screws (#6 x 5/8") are included

Finishes:

  • Polished Brass
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email: