Spring Hinges - Double Acting Hinges

• Stainless steel spring butt hinges.
• Spring tension is adjustable.
• Screw hole patterns conform to ANSI specifications for template hinges.
• Pivot point aligns with non-spring hinges of the same size.
• Screws are included.
• Photo to left shows hinge with the Bronze finish.
• PLEASE NOTE: Some of the models have a stainless steel spring and some of the models have a steel spring. The steel spring is coated with laquer which will offer protection but will eventually rust.

Maximum door weight using three spring hinges

• 4" - 110 lbs.
• 4-1/2" - 150 lbs.

Finishes:

• Bronze
• Satin Stainless Steel

Spring butt hinges are used anywhere you need a door to self-close. A typical use is between your garage and house. We have them in a wide variety of sizes and finishes. As with all of our hinges they are in stock in our own warehouse.

• Large heavy duty spring hinges. Full mortise template hinges.
• Hinges measure 4-1/2" high by 4-1/2" wide (in open position as shown in photo).
• Using 3 hinges per door they will work on a maximum door weight of 150 lbs.
• Hinges are not handed. They will work on both right hand and left hand doors.
• Made from steel base material.
• Easily adjusted spring tension. Click on link below for instructions.
• Screw hole pattern conforms to ANSI specifications for template hinges. Screw hole spacing matches Architectural grade hinge template for 4-1/2" hinges.
• Pivot point aligns with non-spring hinges of the same size.
• Hinges with a SKU number that begins with 760 are "MADE IN USA."
• Screws are included.

PLEASE NOTE: Any of the hinges listed below with an SKU number that starts with 760 is a U.L. listed Grade 1 hinge and may be used on a fire door. A minimum of two hinges per door is required for a fire door.

PLEASE NOTE BEFORE ORDERING, SEE THE "UNIT" COLUMN BELOW

• Some hinges are sold by the "Each". Each means one hinge (order 2 or 3 hinges per door).
• Some hinges are sold by the "Pair". A pair is 2 hinges. Hinges on this page may be ordered by the "Half Pair". To place an order for 1-1/2 pair (3 hinges), enter 1.5 in the order quantity.

These spring butt hinges have radius or rounded corners. They are available in a 1/4" radius or a 5/8" radius and in a wide variety of finishes.

Combination corner hinges have one leaf with a square corner and one leaf with a round (radius) corner. The typical use is on a metal door with a wood door frame. The square corner leaf goes on the metal door and the radius corner leaf goes on the wood door frame.

Double acting spring hinges are also known as Saloon Door Hinges. We have them with ball tips or without tips, in a good selection of finishes, sizes and models. All in stock in our own warehouse, ready to ship out the next working day after you place your order.

These hinges are large diameter barrel hinges that match older style single acting pivot hinges. They are unique in that they are also available in a reverse action spring hinge. A reverse action spring hinge acts to open your door rather than close it.

Our screen door spring hinges are offered in two types; full surface and half surface. The full surface hinges attach to the outside surface of the door and the outside surface of the door frame. The half surface hinges attach to the outside surface of the door and the inside edge of the door frame.

• Self-Closing Hinge for Vinyl Gate and Fence.
• Adjustable spring tension closes gate.
• Made from Stainless steel material, hinge barrel tips are plastic.
• Black powder coated.
• Gap between gate frame and gate post is adjustable (maximum gap is 1.5").
• Features wrap around leaves for extra attachment strength.
• Measurements:
  • Hinge leaf height is 3.5".
  • Post leaf width is 3-9/16".
  • Gate leaf width is 2-3/4".
  • Each Leaf Wrap around is 1-1/4"
• Fasteners are included.
• This hinge is sold by the pair. A pair of hinges is two hinges, what is typically needed to hang one gate.

These Invisible Spring Hinges are made by Soss and are completely invisible when the door is closed. They are meant to be used with Soss's line of regular invisible hinges.